KS 60-66 Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dtkarst** · 08-31-2013, 03:29 PM

I am listing a bunch of parts for my brother, Dylan, who has become diagnosed with an illness that has made it unable for him to work on vehicles much anymore. I will post pictures later, but as of right now, there are a set of doors from a 65 C60 for sale, very straight. Automatic column, and pedal assembly, possibly a whole 63 C20 with a 283 and factory power steering. He has a whole array of hoods for sale most in very good condition. Most of these items will need to be picked up, since they are big items, unless shipping is arranged by the buyer. There will be smaller things that will be up for sale as well. I plan on going out to get pictures of them later on today. All prices are OBO. Please post then PM. Thanks

Factory NOS Clock with paperwork and hardware-$600 OBO

Auto Column-165.00 or $200 with pedals.

Deluxe glovebox door with Chevrolet insert-40.00

63-66 Hoods-$125-175 Some with almost zero damage, some with more.

64-66 C60 doors been inside for years, just moved out to pasture with cab-$500

One passenger side door from 66 C10 with trim pieces has small rust holes on bottom.-$140 obo

Again, I will post Pictures as soon as I can. Kind of new to how this site works so bare with me.

**LostMy65** · 08-31-2013, 06:36 PM

Is that red knob on the dash just left of the gauge cluster an emergency flasher?
Posted via Mobile Device

chakah · 08-31-2013, 06:56 PM

Do you have a set of moldings?

**dtkarst** · 09-01-2013, 06:26 AM

Yes it is a flasher, and which mouldings?

**60-66** · 09-01-2013, 10:11 AM

Sent a PM

**HOTFUN** · 09-01-2013, 05:24 PM

PM sent on parts.

78f1hundo · 09-01-2013, 06:58 PM

Are the C-60 doors the same as the C-10?

jtrichard · 09-01-2013, 07:57 PM

hundo the doors should be the same unless the c60 had set back axle/short hood

jtrichard · 09-01-2013, 08:00 PM

hundo the doors should be the same unless the c60 had set back axle/short hood then the lower front corner would be cut on about a 45 degree angle

78f1hundo · 09-01-2013, 08:06 PM

Well, lets hope, I need a set of super nice doors that are close to me.

**dtkarst** · 09-02-2013, 02:36 PM

They are a standard c60 set if doors. Not the stub nosed style
Posted via Mobile Device

78f1hundo · 09-02-2013, 03:05 PM

Will the doors work on a standard c-10? Pics?

**dtkarst** · 09-02-2013, 05:45 PM

Yes they will. Im going out right now to take pictures of them. They are still on the cab which I believe has been decided to be sold. You can buy the doors or the whole cab. Anyones choice. But ill get some pictures up. Thanks

78f1hundo · 09-02-2013, 06:04 PM

Ok, just let me know......

**dtkarst** · 09-02-2013, 10:19 PM

Here are some pictures of the hood and doors from the C60.

78f1hundo · 09-02-2013, 11:32 PM

Price on doors? I would pick them up of course....

60ShortStepGMC · 09-02-2013, 11:43 PM

Sent a PM.

60ShortStepGMC · 09-03-2013, 12:07 AM

Quote:

Originally Posted by 60ShortStepGMC

Sent a PM.

Oops, broke forum policy.
PM'd regarding whether or not torsion bar washer and spacer were available (ones near the adjusting bolt head).

**dtkarst** · 09-03-2013, 02:47 AM

78f1hundo-prices for the doors are posted. PM me with an offer if you have one.

60ShortStepGMC-Im trying to put a pocture to what you are needing for sure..

78f1hundo · 09-03-2013, 08:36 AM

Any pics of the drivers door?

**dtkarst** · 09-03-2013, 09:08 AM

Driver side door was caught by the wind at one point, but not heavily dented. The top body line got it worst, and its not very deep, and on the bottom mark, its hardly even dented

78f1hundo · 09-03-2013, 12:28 PM

Ok, I will think about it, can't do the 500

**dtkarst** · 09-03-2013, 01:53 PM

Open to offers
Posted via Mobile Device

**1966shortwide** · 09-03-2013, 05:55 PM

Hi , would you take 300.00 cash for the door's , the one's pictured on the cab. I would pick them up , as i live in great bend.Let me know so we can get rolling on this sent pm .

60ShortStepGMC · 09-03-2013, 08:15 PM

Quote:

Originally Posted by dtkarst

60ShortStepGMC-Im trying to put a pocture to what you are needing for sure..

Sorry, not able to get a photo posted at this time. I'll work on it.

08-31-2013, 03:29 PM	#1
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	60-66 Parts I am listing a bunch of parts for my brother, Dylan, who has become diagnosed with an illness that has made it unable for him to work on vehicles much anymore. I will post pictures later, but as of right now, there are a set of doors from a 65 C60 for sale, very straight. Automatic column, and pedal assembly, possibly a whole 63 C20 with a 283 and factory power steering. He has a whole array of hoods for sale most in very good condition. Most of these items will need to be picked up, since they are big items, unless shipping is arranged by the buyer. There will be smaller things that will be up for sale as well. I plan on going out to get pictures of them later on today. All prices are OBO. Please post then PM. Thanks Factory NOS Clock with paperwork and hardware-$600 OBO Auto Column-165.00 or $200 with pedals. Deluxe glovebox door with Chevrolet insert-40.00 63-66 Hoods-$125-175 Some with almost zero damage, some with more. 64-66 C60 doors been inside for years, just moved out to pasture with cab-$500 One passenger side door from 66 C10 with trim pieces has small rust holes on bottom.-$140 obo Again, I will post Pictures as soon as I can. Kind of new to how this site works so bare with me. Attached Images

08-31-2013, 06:36 PM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,507	Re: 60-66 Parts Is that red knob on the dash just left of the gauge cluster an emergency flasher? Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

08-31-2013, 06:56 PM	#3
chakah Registered User Join Date: Jun 2012 Location: El Paso, Tx. Posts: 283	Re: 60-66 Parts Do you have a set of moldings? __________________ "El Jerry" '03 3500 Duramax dually '96 1500 ext. cab Chevy '66 swb C-10 '63 Panel '60 VW vert '56 VW vert

09-01-2013, 06:26 AM	#4
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: 60-66 Parts Yes it is a flasher, and which mouldings?

09-01-2013, 10:11 AM	#5
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 60-66 Parts Sent a PM __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-01-2013, 05:24 PM	#6
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,141	Re: 60-66 Parts PM sent on parts. __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

09-01-2013, 06:58 PM	#7
78f1hundo Registered User Join Date: Aug 2004 Location: Papillion, Nebraska Posts: 229	Re: 60-66 Parts Are the C-60 doors the same as the C-10? __________________ 65' Chevy C-10 Shortbox

09-01-2013, 07:57 PM	#8
jtrichard Registered User Join Date: Jun 2013 Location: joshua tree ca. Posts: 1,484	Re: 60-66 Parts hundo the doors should be the same unless the c60 had set back axle/short hood

09-01-2013, 08:00 PM	#9
jtrichard Registered User Join Date: Jun 2013 Location: joshua tree ca. Posts: 1,484	Re: 60-66 Parts hundo the doors should be the same unless the c60 had set back axle/short hood then the lower front corner would be cut on about a 45 degree angle

09-01-2013, 08:06 PM	#10
78f1hundo Registered User Join Date: Aug 2004 Location: Papillion, Nebraska Posts: 229	Re: 60-66 Parts Well, lets hope, I need a set of super nice doors that are close to me. __________________ 65' Chevy C-10 Shortbox

09-02-2013, 02:36 PM	#11
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: 60-66 Parts They are a standard c60 set if doors. Not the stub nosed style Posted via Mobile Device

09-02-2013, 03:05 PM	#12
78f1hundo Registered User Join Date: Aug 2004 Location: Papillion, Nebraska Posts: 229	Re: 60-66 Parts Will the doors work on a standard c-10? Pics? __________________ 65' Chevy C-10 Shortbox

09-02-2013, 05:45 PM	#13
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: 60-66 Parts Yes they will. Im going out right now to take pictures of them. They are still on the cab which I believe has been decided to be sold. You can buy the doors or the whole cab. Anyones choice. But ill get some pictures up. Thanks

09-02-2013, 06:04 PM	#14
78f1hundo Registered User Join Date: Aug 2004 Location: Papillion, Nebraska Posts: 229	Re: 60-66 Parts Ok, just let me know...... __________________ 65' Chevy C-10 Shortbox

09-02-2013, 10:19 PM	#15
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: 60-66 Parts Here are some pictures of the hood and doors from the C60. Attached Images



Register or Log In To remove these advertisements.

09-02-2013, 11:32 PM	#16
78f1hundo Registered User Join Date: Aug 2004 Location: Papillion, Nebraska Posts: 229	Re: 60-66 Parts Price on doors? I would pick them up of course.... __________________ 65' Chevy C-10 Shortbox

09-02-2013, 11:43 PM	#17
60ShortStepGMC Registered User Join Date: Jun 2013 Location: Sacto, CA Posts: 43	Re: 60-66 Parts Sent a PM.

09-03-2013, 02:47 AM	#19
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: 60-66 Parts 78f1hundo-prices for the doors are posted. PM me with an offer if you have one. 60ShortStepGMC-Im trying to put a pocture to what you are needing for sure..

09-03-2013, 08:36 AM	#20
78f1hundo Registered User Join Date: Aug 2004 Location: Papillion, Nebraska Posts: 229	Re: 60-66 Parts Any pics of the drivers door? __________________ 65' Chevy C-10 Shortbox

09-03-2013, 09:08 AM	#21
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: 60-66 Parts Driver side door was caught by the wind at one point, but not heavily dented. The top body line got it worst, and its not very deep, and on the bottom mark, its hardly even dented Attached Images

09-03-2013, 12:28 PM	#22
78f1hundo Registered User Join Date: Aug 2004 Location: Papillion, Nebraska Posts: 229	Re: 60-66 Parts Ok, I will think about it, can't do the 500 __________________ 65' Chevy C-10 Shortbox

09-03-2013, 01:53 PM	#23
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: 60-66 Parts Open to offers Posted via Mobile Device

09-03-2013, 05:55 PM	#24
1966shortwide Senior Member Join Date: Jan 2012 Location: Great bend,ks Posts: 230	Re: 60-66 Parts Hi , would you take 300.00 cash for the door's , the one's pictured on the cab. I would pick them up , as i live in great bend.Let me know so we can get rolling on this sent pm . Last edited by 1966shortwide; 09-03-2013 at 08:15 PM.

Register or Log In To remove these advertisements.