AZ '66 Long Bed Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66 Burban · 10-12-2013, 12:54 AM

LOCATION: TUCSON, AZ Local pick up preferred but will ship on your dime.

BBW Cab Section w/Glass: $250 -- will cut to your needs or take the whole cab.

Long bed frame & front cross member -- sandblasted & powder coated satin black -- all new grade 8 hardware: $400 SOLD

Grill support: $100 ----- Radiator support $100 ----- Tail gate (no rust): $200

Four speed column: $100 ----- Dash: SOLD ---- Brake & clutch pedal set: $75

Hood: SOLD ----- Fenders: SOLD ----- Bed: SOLD ----- Doors: SOLD

Fender extensions: $20/each ----- Rear end: SOLD

More pics and parts later

cru_zn_29 · 10-12-2013, 11:16 AM

I am interested in BBW is the glass original soft ray tinted. also Does the BBW metal have holes or dents ?
Thanks Kenny

66 Burban · 10-12-2013, 11:36 AM

I'm 90% sure back glass is Soft Ray ---- all side glasses were --- I'll check tomorrow and let you know --- you're 1st on this.
Couple small dents in metal below window.
Thx for looking...

Quote:

Originally Posted by cru_zn_29

I am interested in BBW is the glass original soft ray tinted. also Does the BBW metal have holes or dents ?
Thanks Kenny

Greg63 · 10-12-2013, 11:43 AM

I'm looking for an uncut low hump transmission floor panel.
Do you have one?
Greg.

66 Burban · 10-12-2013, 11:50 AM

Quote:

Originally Posted by Greg63

I'm looking for an uncut low hump transmission floor panel.
Do you have one?
Greg.

I have the hump cover from this truck --- think it is high hump -- not sure.
It has one small cut at front --- not cutout just looks like a saw cut --- very
easy to weld...
What is height of high and low hump??

Greg63 · 10-12-2013, 11:55 AM

High hump is the same height from the seat to the firewall. Low hump dips down about 2" at the seat.
Greg.

cru_zn_29 · 10-12-2013, 11:55 AM

Ok ! Also check for scratches or sand damage.
Thanks Kenny

66 Burban · 10-13-2013, 12:44 AM

Quote:

Originally Posted by Greg63

High hump is the same height from the seat to the firewall. Low hump dips down about 2" at the seat.
Greg.

OK --- mine is high hump............

66 Burban · 10-13-2013, 12:46 AM

Quote:

Originally Posted by cru_zn_29

Ok ! Also check for scratches or sand damage.
Thanks Kenny

Kenny,

Checked the back glass late this PM ----- it is light green tinted replacement --- not Soft Ray.... evidently cut some time ago. I kept Soft Ray door glass and vent windows for spares for my suburb.

cru_zn_29 · 10-13-2013, 10:37 AM

Thanks for checking I need a Soft Ray
Kenny

c10dude805 · 10-16-2013, 02:19 PM

I remember a while back you were heading out to the Pomona swapmeet for pickup, is this still an option?

c10dude805 · 10-16-2013, 06:38 PM

Sorry, forgot to mention, i'm interested in the cab as a whole.

**yote1234** · 10-16-2013, 07:02 PM

is the tailgate have a bow? looks like bowed at middle bottom? thx

66 Burban · 03-10-2014, 04:07 PM

TTT --- parts still for sale !!!

10-12-2013, 12:54 AM	#1
66 Burban Registered User Join Date: Aug 2011 Location: Green Valley,AZ Posts: 527	'66 Long Bed Parts LOCATION: TUCSON, AZ Local pick up preferred but will ship on your dime. BBW Cab Section w/Glass: $250 -- will cut to your needs or take the whole cab. Long bed frame & front cross member -- sandblasted & powder coated satin black -- all new grade 8 hardware: $400 SOLD Grill support: $100 ----- Radiator support $100 ----- Tail gate (no rust): $200 Four speed column: $100 ----- Dash: SOLD ---- Brake & clutch pedal set: $75 Hood: SOLD ----- Fenders: SOLD ----- Bed: SOLD ----- Doors: SOLD Fender extensions: $20/each ----- Rear end: SOLD More pics and parts later Attached Images __________________ Remember: "When seconds count, the Police are only minutes away". Thx, Billy B. Last edited by 66 Burban; 03-10-2014 at 04:06 PM.

10-12-2013, 11:16 AM	#2
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: '66 Long Bed Parts I am interested in BBW is the glass original soft ray tinted. also Does the BBW metal have holes or dents ? Thanks Kenny

10-12-2013, 11:43 AM	#4
Greg63 Enjoy your truck Join Date: Oct 2007 Location: Newmarket, Ontario, Canada Posts: 1,066	Re: '66 Long Bed Parts I'm looking for an uncut low hump transmission floor panel. Do you have one? Greg. __________________ 1 Corinthians 10:13 1963 Chevrolet 1/2 ton 2010 Camaro SS/RS 2014 Jeep Grand Cherokee 2016 Jeep Cherokee

10-12-2013, 11:55 AM	#6
Greg63 Enjoy your truck Join Date: Oct 2007 Location: Newmarket, Ontario, Canada Posts: 1,066	Re: '66 Long Bed Parts High hump is the same height from the seat to the firewall. Low hump dips down about 2" at the seat. Greg. __________________ 1 Corinthians 10:13 1963 Chevrolet 1/2 ton 2010 Camaro SS/RS 2014 Jeep Grand Cherokee 2016 Jeep Cherokee

10-12-2013, 11:55 AM	#7
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: '66 Long Bed Parts Ok ! Also check for scratches or sand damage. Thanks Kenny

10-13-2013, 10:37 AM	#10
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: '66 Long Bed Parts Thanks for checking I need a Soft Ray Kenny

10-16-2013, 02:19 PM	#11
c10dude805 Registered User Join Date: Jul 2013 Location: Simi Valley, Ca Posts: 12	Re: '66 Long Bed Parts I remember a while back you were heading out to the Pomona swapmeet for pickup, is this still an option?

10-16-2013, 06:38 PM	#12
c10dude805 Registered User Join Date: Jul 2013 Location: Simi Valley, Ca Posts: 12	Re: '66 Long Bed Parts Sorry, forgot to mention, i'm interested in the cab as a whole.

10-16-2013, 07:02 PM	#13
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,278	Re: '66 Long Bed Parts is the tailgate have a bow? looks like bowed at middle bottom? thx __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

03-10-2014, 04:07 PM	#14
66 Burban Registered User Join Date: Aug 2011 Location: Green Valley,AZ Posts: 527	Re: '66 Long Bed Parts TTT --- parts still for sale !!! __________________ Remember: "When seconds count, the Police are only minutes away". Thx, Billy B.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.