Nice bed w/ tailgate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*boytoytrading* · 07-18-2003, 04:39 PM

I have this bed from a 70 GMC LWB with a big letter GMC tailgate. The bed is rust free minus avery small amount where the tailgte sit's. The tailgate is rust free and very straight with only miner scratch's. The last tailgate I sold on E-bay for $375, and it was'ny as nice as this one. I'll sell as a whole for $450. Or the gate at $350 and the bed for $200.

*boytoytrading* · 07-18-2003, 04:40 PM

**COBALT** · 07-18-2003, 05:48 PM

...yes, but that's not bad if the tailgate is original and NOT bent to hell. I should know: I have two worthless bent ones and 1 very fine original off of a '71 that will be my tailgate for my project. I spend $300 for it to AVOID aftermarket and new OEM tailgates.

**PICKMUP** · 07-18-2003, 05:51 PM

You can't get nice "original" TGs that are heavy gauge and 100% correct like the GM...the repros are not originals...Let the guy try & sell his parts without jumping in and "sharp shooting" him. If you think that is too much then just go ahead and offer a better one at a lower price...ON YOUR OWN THREAD, NOT HIS!

07-18-2003, 06:08 PM

Pick: You are right, it was something that probably wasn't called for. I will take it off.

Cobalt: I didn't think of it like that. Then again, I am looking for a tailgate just like that, but don't have the money for it but wish I did.

07-18-2003, 06:14 PM

I PM Boytoy and apologized for making the comment that you can buy a new one for cheaper. And told him I was going to delete the post.....

**seacrow** · 07-18-2003, 10:06 PM

Hey boy toy, How does this tailgate compare to the one I am getting? I may like that one better.

*boytoytrading* · 07-19-2003, 12:45 AM

Tailgate sold. Thank's Seacrow.

I will now sell the bed for $150. Hard to find one this clean and straight.

I also have a tailgat from a 71 chevy that is to, straight and rust free, $300.

Tilt wheel column from a van for $75.

blue402 · 07-20-2003, 09:30 PM

I might be interested in your '72 bed. I will send you a PM.

*boytoytrading* · 07-21-2003, 01:04 AM

Ok, This bed is sold, Thank's

But, I do have two more. 1st one is off of a 71 Chevy. It has a built in tool box in the side that is in great shape, over all, has little rust under the the tool box and along the back where the gate sit's. Tailgate is not included. $175

2nd bed is off of a 68 GMC. Bed is in good shape with very, very, little rust. Tailgate again, is not included. $175

Picture's for those who want's them.

SLS · 07-21-2003, 02:19 AM

boytoytrading:

Do you ship tailgates...or are you a 'buyer pickup' guy?

*boytoytrading* · 07-21-2003, 03:00 AM

Yes I do. I'm not scared to ship, as long as your not scare to pay for it. Shipping can get very exspinsive.

SLS · 07-21-2003, 03:20 AM

boytoytrading:

How much do you thik it would cost to ship a tailgate to Nashville, TN? I really don't have a clue.

*boytoytrading* · 07-21-2003, 03:46 AM

Quote:

Originally posted by SLS
boytoytrading:

How much do you thik it would cost to ship a tailgate to Nashville, TN? I really don't have a clue.

Well, a safe bet would be around $75.

SLS · 07-21-2003, 04:02 AM

OK. I'm considering that '71 tailgate you mentioned.

Any details, besides no rust and straight? Pics?

I was just looking at the pic's on your "trip" thread. Man, I wish I could get up to your place...I have a 71 Short/Fleet that is in 'dire need' of pieces and parts...lots of little stuff...and a complete bed.

fatfords · 07-21-2003, 09:51 AM

I PM'ed you regarding the van tilt wheel.

Thanks,
Kent

*boytoytrading* · 07-21-2003, 11:13 PM

Quote:

Originally posted by fatfords
I PM'ed you regarding the van tilt wheel.

Thanks,
Kent

Still have the tilt wheel, good shape with cruise control!
How's $115 shipped to your door? Anybody?

07-18-2003, 04:39 PM	#1
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Nice bed w/ tailgate I have this bed from a 70 GMC LWB with a big letter GMC tailgate. The bed is rust free minus avery small amount where the tailgte sit's. The tailgate is rust free and very straight with only miner scratch's. The last tailgate I sold on E-bay for $375, and it was'ny as nice as this one. I'll sell as a whole for $450. Or the gate at $350 and the bed for $200. Attached Images

07-18-2003, 04:40 PM	#2
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Shot of the gate Attached Images

07-18-2003, 05:48 PM	#3
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	...yes, but that's not bad if the tailgate is original and NOT bent to hell. I should know: I have two worthless bent ones and 1 very fine original off of a '71 that will be my tailgate for my project. I spend $300 for it to AVOID aftermarket and new OEM tailgates. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

07-18-2003, 05:51 PM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,122	Linus You can't get nice "original" TGs that are heavy gauge and 100% correct like the GM...the repros are not originals...Let the guy try & sell his parts without jumping in and "sharp shooting" him. If you think that is too much then just go ahead and offer a better one at a lower price...ON YOUR OWN THREAD, NOT HIS! __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 07-18-2003 at 05:53 PM.

07-18-2003, 10:06 PM	#7
seacrow Registered User Join Date: Mar 2001 Location: Bradenton, Florida Posts: 366	Hey boy toy, How does this tailgate compare to the one I am getting? I may like that one better. __________________ 71 GMC Custom. 350, 4bbl., auto. Restored in memory of my grandfather. 2008 Ford F-250 Super Duty CC King Ranch, moonroof, heated captains chairs, 6.4 PowerStroke. 2007 Suzuki Hayabusa, all black 1985 Mustang GT T-top, 5 spd. 54K orig miles.

07-18-2003, 06:08 PM	#5
Linus0014 Guest Posts: n/a	Pick: You are right, it was something that probably wasn't called for. I will take it off. Cobalt: I didn't think of it like that. Then again, I am looking for a tailgate just like that, but don't have the money for it but wish I did.

07-18-2003, 06:14 PM	#6
Linus0014 Guest Posts: n/a	I PM Boytoy and apologized for making the comment that you can buy a new one for cheaper. And told him I was going to delete the post.....

07-19-2003, 12:45 AM	#8
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Tailgate sold Tailgate sold. Thank's Seacrow. I will now sell the bed for $150. Hard to find one this clean and straight. I also have a tailgat from a 71 chevy that is to, straight and rust free, $300. Tilt wheel column from a van for $75.

07-20-2003, 09:30 PM	#9
blue402 Registered User Join Date: Jul 2003 Location: Omaha NE Posts: 4	I might be interested in your '72 bed. I will send you a PM.

07-21-2003, 01:04 AM	#10
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Bed sold, another to be! Ok, This bed is sold, Thank's But, I do have two more. 1st one is off of a 71 Chevy. It has a built in tool box in the side that is in great shape, over all, has little rust under the the tool box and along the back where the gate sit's. Tailgate is not included. $175 2nd bed is off of a 68 GMC. Bed is in good shape with very, very, little rust. Tailgate again, is not included. $175 Picture's for those who want's them.

07-21-2003, 02:19 AM	#11
SLS Finish the'71..or bust! Join Date: Jun 2003 Location: Nashville, TN. Posts: 441	boytoytrading: Do you ship tailgates...or are you a 'buyer pickup' guy?

07-21-2003, 03:00 AM	#12
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Shipping gate's Yes I do. I'm not scared to ship, as long as your not scare to pay for it. Shipping can get very exspinsive.

07-21-2003, 03:20 AM	#13
SLS Finish the'71..or bust! Join Date: Jun 2003 Location: Nashville, TN. Posts: 441	boytoytrading: How much do you thik it would cost to ship a tailgate to Nashville, TN? I really don't have a clue.

07-21-2003, 04:02 AM	#15
SLS Finish the'71..or bust! Join Date: Jun 2003 Location: Nashville, TN. Posts: 441	OK. I'm considering that '71 tailgate you mentioned. Any details, besides no rust and straight? Pics? I was just looking at the pic's on your "trip" thread. Man, I wish I could get up to your place...I have a 71 Short/Fleet that is in 'dire need' of pieces and parts...lots of little stuff...and a complete bed. Last edited by SLS; 07-21-2003 at 04:06 AM.

07-21-2003, 09:51 AM	#16
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	I PM'ed you regarding the van tilt wheel. Thanks, Kent __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.