The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-25-2003, 10:07 PM   #1
palallin
Registered User
 
Join Date: Jul 2002
Location: St. James, MO
Posts: 1,239
My truck bit back.

As my sig line says, my truck is in the body shop--well, actually, it's in pieces in the shop. I've got another cab for it, and I've been stripping stuff out of the old one.

Tuesday evening, I was working on removing the clutch pedal-I had pulled the through-the-firewall rod and was trying to pull the clamped lever off the end of the clutch pedal shaft, when I pushed on the pedal, and the spring took over. The lever caught my right ring finger against the mounting bracket and acted just like a shear: I lost most of the end of the finger.

When I pulled it out from under the dash, I had to place the end of the finger back in place; I also had to pluck off the nail, as it was in the way. The guy I was woeking with got me a clean, paper, blue shop towel, and I wrapped the pieces (except for the nail and part of the nail bed) tightly in the towel, and he drove me 15 miles to the ER, where I spent most of the night being reassembled.

Not only was the finger "degloved," the bone was snipped right in two. According to the bone doc (who looked things over this AM), if I avoid getting an infection for the next week, I will probably get to keep the finger. In any case, the nail's future is uncertain, though the best chance is that it will grow in wrongly and will have to be removed.

I spent all day Wednesday in bed (and puking, as I don't tolerate the pain meds well), and it has taken me a l-o-n-g time to type this out with my left hand (I'm a right-handed English prof with 160 or so papers to grade this coming week--*sigh*).

Anyway, learn from my mistake: when playing with the clutch pedal, DETATCH THE SPRING FIRST!!!!!

Note to truck: Bad truck! No new bed floor for YOU this year (I have to pay the doctors!). . . .
__________________
'69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.
palallin is offline   Reply With Quote
Old 07-25-2003, 10:27 PM   #2
Gordo
Registered User
 
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
Angry

Damn! Sorry to hear that.
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03)
1998 S10 short bed
2002 S10 Blazer
1942 Oldsmobile
1958 Massey Harris Pony
1951 Wife
Killingworth, Connecticut

May those who love us, love us, any of those who do not love us, may God turn their hearts.
And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping.

A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist.
Gordo is offline   Reply With Quote
Old 07-25-2003, 10:30 PM   #3
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,749
Sorry to hear about that. Hope everything goes well.
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 07-25-2003, 10:47 PM   #4
racedvl
Account Suspended
 
racedvl's Avatar
 
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
Ouch!
racedvl is offline   Reply With Quote
Old 07-25-2003, 10:48 PM   #5
68 Stepside
huh?
 
68 Stepside's Avatar
 
Join Date: May 2000
Location: Washington, Illinois
Posts: 5,692
eek...I had a razor knife bite back once....got the very tip of my left index finger....sounds like it got a little more of yours though Hope it all works out well for ya!
__________________
Someday when I'm lonely,
Wishing you weren't so far away,
Then I will remember
Things we said today.

RIP El Jay
68 Stepside is offline   Reply With Quote
Old 07-25-2003, 11:52 PM   #6
72MARIO
Registered User
 
72MARIO's Avatar
 
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,052
pic's !
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair
http://67-72chevytrucks.com/vboard/s...d.php?t=625017
1967 C/20 6.0/4L80 Roofing Truck
1990 V2500 Suburban "Plow Truck"
2005 TAHOE DD
72MARIO is offline   Reply With Quote
Old 07-25-2003, 11:53 PM   #7
72MARIO
Registered User
 
72MARIO's Avatar
 
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,052
Sorry That was rude. I know I have had stiches a couple of times while taking my truck apart and Steel in my eyes twice from grinding.
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair
http://67-72chevytrucks.com/vboard/s...d.php?t=625017
1967 C/20 6.0/4L80 Roofing Truck
1990 V2500 Suburban "Plow Truck"
2005 TAHOE DD
72MARIO is offline   Reply With Quote
Old 07-25-2003, 11:54 PM   #8
70c10
67-72 Addict!
 
70c10's Avatar
 
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
Sorry to hear that. Hope your feeling better soon!
__________________
Jim

1970 C/10 Fleetside w/Ghost Flames
Lowered 4.5" front and 4" rear (Raked)
355/350 Turbo w/shift kit
10" Redneck Performance Verter w/2500 stall
Hooker Super Comps part#2808-1
Performer RPM Air-Gap
12 Bolt w/3:73 gears- Eaton Posi
Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads
70c10 is offline   Reply With Quote
Old 07-26-2003, 12:25 AM   #9
jhwkns
Registered Cruiser
 
jhwkns's Avatar
 
Join Date: May 2002
Location: Las Vegas NV
Posts: 2,230
Yeeoouuuccch! .....damn that had to smart
__________________
I intend to live forever. So far, so good.
jhwkns is offline   Reply With Quote
Old 07-26-2003, 12:31 AM   #10
Shane
Account Suspended
 
Shane's Avatar
 
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
Pisser! I hope you get to feeling better soon ... I don't take pain meds well either.
Shane is offline   Reply With Quote
Old 07-26-2003, 12:42 AM   #11
ChrisK10
1971 C20 Custom Camper
 
ChrisK10's Avatar
 
Join Date: Mar 2003
Location: Ames/Shenandoah, IA
Posts: 1,435
Owch! That sounds like it really hurt! Hope you feel better soon!
__________________
'71 Chevy C20 Custom Camper, 454, TH400

'97 GMC K1500 5.7L
ChrisK10 is offline   Reply With Quote
Old 07-26-2003, 12:53 AM   #12
barn9
Half a bubble off!
 
barn9's Avatar
 
Join Date: Jun 2000
Location: Winfield, Ks, USA
Posts: 5,588
Ouch! Hope things go well for you! I can sympathize just a bit, over the years I have had several incidents, all on the same hand. First was almost cutting the end off my index finger, having it sewed back on and waiting to see if the nail would grow back, which it did, 90% of normal. Second was an industrial accident that tore off my little finger and almost got my ring finger, which they saved, but is permanently bent and dis-figured. Third was a broken bone at the base of my thumb that I mistook for a wrist sprain, and then it developed a tumor that almost cost me that thumb, but was saved via a bone-graft taken from my hip. The first was bad, the second was horrible, and the third was just plain no fun at all, but the ol' hand has managed to weather all 3 storms, and I'm typing away as I write this (of course I can't reach the "P" key or others on that side without moving my hand - lol), so I guess I'm proof of how the ol' body heals and comes back.
Hang in there, and be glad you still have that finger! Hope everything heals OK.
__________________
Just call me LB.
'71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.
barn9 is offline   Reply With Quote
Old 07-26-2003, 01:01 AM   #13
Warbones
Navel Inspector
 
Warbones's Avatar
 
Join Date: Mar 2003
Location: Wichita, Ks
Posts: 1,373
Sell that posessed truck!!! It's probably some 3,000 year old demon that your bringing back to life.

Just teasing. I hope everything heals correctly for you.
__________________
1948 Chevy Aerosedan GONE! I think.
1984 Cadillac Fleetwood Brougham Coupe
WANTED 1967 IMPALA

1967 CST C10 Long Bed with a 283
Warbones is offline   Reply With Quote
Old 07-26-2003, 01:08 AM   #14
krue
Designated A-hole!
 
krue's Avatar
 
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
Sorry to hear your truck is out to get you! Hope everything works out with no infection.
__________________
"If it ain't broke, fix it 'til it is!"
Being stupid ain't illegal.

We're Still Debt Free Except for the House!!!
www.daveramsey.com

70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e
93 S-10 "Poppaw's Truck"
krue is offline   Reply With Quote
Old 07-26-2003, 01:28 AM   #15
miket
Registered User
 
miket's Avatar
 
Join Date: Jan 2003
Location: Seattle WA
Posts: 1,466
Sorry to hear about the accident...it can be painful...and I really like all my fingers...

I had something similar happen to me....got into a struggle with an EX-best friend over my filet knife while salmon fishing....unfortunately I lost the pad of my index finger....I didn't loose my finger like you though...


I hope everything goes well....
__________________
FocuzTech Performance


Evergreen Protective Coatings
Gatorhyde...the best kept secret in spray in bed lining & protection
miket is offline   Reply With Quote
Old 07-26-2003, 02:07 AM   #16
casey
Registered User
 
casey's Avatar
 
Join Date: Jan 2003
Location: Kelowna B.C. Canada
Posts: 2,048
that brings back memories, when I almost ripped my thumb off, I know the feeling, get well soon
casey is offline   Reply With Quote
Old 07-26-2003, 03:13 AM   #17
Iron-Butt
454 club
 
Iron-Butt's Avatar
 
Join Date: Oct 2002
Location: Oklahoma
Posts: 1,348
Sorry, Hope you get to feeling better.
__________________
David
1965 Chevrolet c-10 454 automatic Custom bbw swb.
1965 Chevrolet C-10 swb (Sold)
1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's.
R.I.P "I will miss you.
1967 Chevrolet C-10 6 Cyl Custom lwb
1939 Chevrolet Coupe, 350 v8 automatic.
1935 Chevrolet 2 Dr Standard in the works.
2015 Harley Davidson Street Glide.
2023 Chevrolet Stingray Z51 Convertible.

I never want to grow up.
Iron-Butt is offline   Reply With Quote
Old 07-26-2003, 03:35 AM   #18
SweetandLong68
Your UncleBen
 
SweetandLong68's Avatar
 
Join Date: Dec 2002
Location: Indian Trail, NC
Posts: 590
Damn man! Bet that hurt like crazy! Sorry to hear it! Hope you recover quickly!!

lata
CHRIS
__________________
68 C10 shortbed -- Street/Strip
SweetandLong68 is offline   Reply With Quote
Old 07-26-2003, 09:22 AM   #19
Mike Culpepper
Red
 
Mike Culpepper's Avatar
 
Join Date: Feb 2003
Location: Llano... Texas Hill Country
Posts: 448
DOOOOGH! Man my face was grimacing while I read your post! Hope the bugs stay away from the finger and all goes well.

Hey, you could scan all your papers onto the board and we'll grade 'em for ya........did I spel grimmacing write?
Mike
__________________
'72 Cheyenne LWB 350/350

"The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).
Mike Culpepper is offline   Reply With Quote
Old 07-26-2003, 09:31 AM   #20
Southpa
Registered User
 
Southpa's Avatar
 
Join Date: May 2000
Location: Victoria, BC, Canada
Posts: 2,410
Thats why I got out of the steel fabrication trade many years ago. I used to run hydraulic and flywheel operated shears and punch presses, not to mention the 70 ton brake press. I saw a guy get his pinky crushed in the brake press one day. And all thru the years I've seen carpenters, fishermen etc. etc. with missing fingers. When I see that missing digit my first thought is, "hmmmm, someone wasn't paying attention". As it is I really really like playing my guitars. Stay safe and thanks for the reminder about the clutch pedal, even though I drive an automatic, .
__________________
1970 GMC 1500 Custom
Original 350/TH350
Victoria, BC, Canada


You can wish in one hand and crap in the other.
See which one gets filled first.
Southpa is offline   Reply With Quote
Old 07-26-2003, 10:54 AM   #21
Bernie
Senior Member
 
Join Date: Jan 2001
Location: Northern Illinois
Posts: 516
I'm a Math Prof. I'm sure the finger hurt, but grading during Summer School is really painful . Hope you recover quickly.
__________________
Bernie
Bernie is offline   Reply With Quote
Old 07-26-2003, 01:52 PM   #22
73stepside
Registered User
 
73stepside's Avatar
 
Join Date: Feb 2002
Location: Moore OK 73160
Posts: 974
man that sucks. i hope everything heels really close to 100 percent if not 100 percent
__________________
04 GMC Sierra RCSS
70 CST LWB
04 HD Sportster 1200 Custom
73stepside is offline   Reply With Quote
Old 07-27-2003, 12:01 PM   #23
raggedjim
Senior Member
 
raggedjim's Avatar
 
Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,411
15 years ago, rolling a CHEAP 3 wheeled engine stand on concrete floor by holding on to the crankshaft pulley of a small block, fell over and snapped my middle finger on left hand off. Drove to the er and they cleaned it up and sent me to the Naval hospital. They reattached it and it works fine to this day (except the end joint is fused) I can still play guitar and shoot the bird as well as ever!

My advise is listen to the physical therapists, and do the exercises, they hurt like bat**** but if you want it back, do it anyway.

Goodluck, Roger
__________________
Roger

'68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675
'69 ('70?) 2wd Blazer
'70 GMC Jimmy 2wd
raggedjim is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com