CA Parting out 78 1/2 ton lwb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Grandpa54 · 03-30-2014, 08:30 PM

I bought the truck for the disk brake front end so the rest of it must go it, has rust free metal.

Front fenders: 150.00
inner fenders: 75.00
grill: 100.00
doors: 150.00
cab: 300.00
radiator support:125.00
non tilt steering column:75.00
i could only do 5 pics, let me know what you want and il wiil get pictures.

flashed · 03-30-2014, 10:07 PM

Are the door gaskets any good ?

goldenwestmodels · 03-30-2014, 10:18 PM

I am interested in the doors and fenders. Please send me pictures.

Vern

slimneverdies · 03-30-2014, 10:43 PM

I'll take the fenders if you'll ship them.89122

Grandpa54 · 03-30-2014, 11:11 PM

Quote:

Originally Posted by flashed

Are the door gaskets any good ?

Ill check tomorrow

Grandpa54 · 03-30-2014, 11:13 PM

Quote:

Originally Posted by goldenwestmodels

I am interested in the doors and fenders. Please send me pictures.

Vern

Ill get pics of the doors tomorrow

Grandpa54 · 03-30-2014, 11:14 PM

Quote:

Originally Posted by slimneverdies

I'll take the fenders if you'll ship them.89122

Let check on the shipping?

**ScottH** · 03-31-2014, 12:05 AM

Looking for some e-brake parts, need the guide looms that hold the middle cable in place, and also the connectors between the mid cable & rear cables.

Thanks
Scott

Grandpa54 · 03-31-2014, 12:12 AM

Quote:

Originally Posted by ScottH

Looking for some e-brake parts, need the guide looms that hold the middle cable in place, and also the connectors between the mid cable & rear cables.

Thanks
Scott

Would you have any pictures?

**ScottH** · 03-31-2014, 12:17 AM

There r 3 guides, one on each side plus one more toward the front. They may be shaped slightly different than the pic. Also need 2 of the connectors (one for each side).

Grandpa54 · 03-31-2014, 10:05 AM

Quote:

Originally Posted by scotth

there r 3 guides, one on each side plus one more toward the front. They may be shaped slightly different than the pic. Also need 2 of the connectors (one for each side).

ill take a look

Grandpa54 · 03-31-2014, 01:27 PM

Quote:

Originally Posted by scotth

there r 3 guides, one on each side plus one more toward the front. They may be shaped slightly different than the pic. Also need 2 of the connectors (one for each side).

it looks like there are 2 in the front one about 12" and a short one and the clips. Ill try to get a pic

Grandpa54 · 03-31-2014, 01:29 PM

Quote:

Originally Posted by flashed

are the door gaskets any good ?

there dirty the one on the ps is chewed up on the bottom.

**ScottH** · 03-31-2014, 01:52 PM

thanks for checking, if u could post a pic it would help.

flashed · 03-31-2014, 02:37 PM

The driver side door gasket is what I need the most .

Grandpa54 · 03-31-2014, 04:12 PM

Quote:

Originally Posted by ScottH

thanks for checking, if u could post a pic it would help.

I found all three,plus the clips

Grandpa54 · 03-31-2014, 04:15 PM

Quote:

Originally Posted by flashed

The driver side door gasket is what I need the most .

The drivers side is the best, as you can see it has a gap at the bottom. I don't know if it shrunk from age it does not look cut let me know?

Grandpa54 · 03-31-2014, 04:18 PM

Quote:

Originally Posted by Grandpa54

The drivers side is the best, as you can see it has a gap at the bottom. I don't know if it shrunk from age it does not look cut let me know?

Ill get this right yet

Grandpa54 · 03-31-2014, 04:22 PM

Quote:

Originally Posted by goldenwestmodels

I am interested in the doors and fenders. Please send me pictures.

Vern

Here you go Vern

**ScottH** · 03-31-2014, 04:43 PM

Thanks for the pics, dont think I need the long bar, how much for the other 4 pieces shipped?

flashed · 03-31-2014, 04:48 PM

How much shipped for the driver door gasket to Ga 30114 ?

54Caddy · 03-31-2014, 05:38 PM

How straight is the hood? I can pick it up

Grandpa54 · 03-31-2014, 06:13 PM

Quote:

Originally Posted by ScottH

thanks for checking, if u could post a pic it would help.

Is 20.00 plus shipping fair? if so PM me your zip and address and ill find out,Mark

Grandpa54 · 03-31-2014, 06:14 PM

Quote:

Originally Posted by 54Caddy

How straight is the hood? I can pick it up

Sorry, the hood was gone when I got it.

rapidride3 · 03-31-2014, 09:50 PM

I am in need of a lower grille panel. How much shipped to 62206?

03-30-2014, 08:30 PM	#1
Grandpa54 Registered User Join Date: Mar 2011 Location: Bakersfield Ca. Posts: 417	Parting out 78 1/2 ton lwb I bought the truck for the disk brake front end so the rest of it must go it, has rust free metal. Front fenders: 150.00 inner fenders: 75.00 grill: 100.00 doors: 150.00 cab: 300.00 radiator support:125.00 non tilt steering column:75.00 i could only do 5 pics, let me know what you want and il wiil get pictures. Attached Images

03-30-2014, 10:07 PM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Parting out 78 1/2 ton lwb Are the door gaskets any good ?

03-30-2014, 10:18 PM	#3
goldenwestmodels Registered User Join Date: Feb 2007 Location: shaws flat Posts: 89	Re: Parting out 78 1/2 ton lwb I am interested in the doors and fenders. Please send me pictures. Vern

03-30-2014, 10:43 PM	#4
slimneverdies Registered User Join Date: Apr 2006 Location: Miami now in Vegas Posts: 828	Re: Parting out 78 1/2 ton lwb I'll take the fenders if you'll ship them.89122 __________________ Long live SLIM ------------------ At least try to buy American

03-31-2014, 12:05 AM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 78 1/2 ton lwb Looking for some e-brake parts, need the guide looms that hold the middle cable in place, and also the connectors between the mid cable & rear cables. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-31-2014, 12:17 AM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 78 1/2 ton lwb There r 3 guides, one on each side plus one more toward the front. They may be shaped slightly different than the pic. Also need 2 of the connectors (one for each side). Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-31-2014, 01:52 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 78 1/2 ton lwb thanks for checking, if u could post a pic it would help. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-31-2014, 02:37 PM	#15
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Parting out 78 1/2 ton lwb The driver side door gasket is what I need the most .

03-31-2014, 04:43 PM	#20
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 78 1/2 ton lwb Thanks for the pics, dont think I need the long bar, how much for the other 4 pieces shipped? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-31-2014, 04:48 PM	#21
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Parting out 78 1/2 ton lwb How much shipped for the driver door gasket to Ga 30114 ?

03-31-2014, 05:38 PM	#22
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Parting out 78 1/2 ton lwb How straight is the hood? I can pick it up __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

03-31-2014, 09:50 PM	#25
rapidride3 Registered User Join Date: Feb 2006 Location: Saint Louis Posts: 84	Re: Parting out 78 1/2 ton lwb I am in need of a lower grille panel. How much shipped to 62206?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.