ME ME 250 Power steering setup & Parting 69 c/10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

062500hd · 04-25-2014, 07:24 PM

Parting My 1969 C/10 lwb-

Complete power steering setup from 1969 250 including Pump with lines, all brackets, 2 groove balancer and 2 groove fan pulley, fan spacer and fan if needed, I can also remove the 2 groove alternator pulley (or sell the whole alternator) $300

Rear trailing arms, not sure on shipping or what these are really worth, no rust in exc. shape $200

I am keeping the glass, hood, seat, and cluster out of the truck, no bed, no doors,no fenders.. all other small parts and trinkets are available if I have them. I will list what I can over the next few days….

kaphillips · 04-25-2014, 09:55 PM

Are there any factory exhaust hangers revited to the frame or the cross member at the axle. If there are any very interested with pictures thanks.

kaphillips · 04-25-2014, 09:57 PM

Quote:

Originally Posted by kaphillips

Are there any factory exhaust hangers revited to the frame or the cross member at the axle. If there are any very interested with pictures thanks.

Oh what color was the interior. Any seatbelts or visors.

062500hd · 04-26-2014, 10:26 AM

Visors are black, ok shape with some stitching pulling out I will take a pic for you…

no exhaust hangers that I can see but I will look closer….do you have a pic of what they look like? No Seatbelts….

kaphillips · 04-26-2014, 01:32 PM

The bracket on the left is the one toward the end of the frame for the tail pipe riveted to the outside of the frame rail. The bracket on the right is under the cab riveted to the inside of the frame rail. Thanks

062500hd · 04-28-2014, 07:58 AM

$300 New price on power steering!!

K5Rodder · 05-30-2014, 12:06 AM

How much for the cross member for the trailing arms, the trailing arms, and mounts? Do 150 plus shipping?

beautimus · 05-30-2014, 05:15 AM

how much for the throttle linkage , I need it all the way from the gas peddle to the carb. oh , and shipping to 35188? paypal ? thanks , Tony
also for the fuel line that goes from the pump to the carb.

swamp rat · 05-30-2014, 05:26 AM

Do i see a working 6 cyl HEI in that pic? I'm looking for one.. Let me know.

**michael bustamante** · 05-30-2014, 09:01 AM

does the back window have the stainless trim on it? I am needing the long lower peace. If it is available please let me know

swamp rat · 05-30-2014, 11:18 AM

How much for the air filter housing? zip 98387

**PICKMUP** · 05-30-2014, 11:34 AM

That looks like the first "correct" 250 PS sys to be offered on here, in a long time. Be sure the double alt pulley goes with it. It is needed. Hard PS to find.

Youey · 05-30-2014, 12:18 PM

Quote:

Originally Posted by beautimus

how much for the throttle linkage , I need it all the way from the gas peddle to the carb. oh , and shipping to 35188? paypal ? thanks , Tony
also for the fuel line that goes from the pump to the carb.

Next in line for this *

062500hd · 05-30-2014, 05:57 PM

Quote:

Originally Posted by swamp rat

Do i see a working 6 cyl HEI in that pic? I'm looking for one.. Let me know.

How does $50 sound-comes with a new- in - box internal module & rotor-

062500hd · 05-30-2014, 05:58 PM

Quote:

Originally Posted by michael bustamante

does the back window have the stainless trim on it? I am needing the long lower peace. If it is available please let me know

Sorry never had trim-

062500hd · 05-30-2014, 05:59 PM

Quote:

Originally Posted by K5Rodder

How much for the cross member for the trailing arms, the trailing arms, and mounts? Do 150 plus shipping?

I would, shipping would probably be a killer, give me your zip and i will attempt a quote!

062500hd · 05-30-2014, 05:59 PM

Quote:

Originally Posted by swamp rat

How much for the air filter housing? zip 98387

Sorry had a homemade filter on it…no oem stuff..

062500hd · 05-30-2014, 06:01 PM

Quote:

Originally Posted by beautimus

how much for the throttle linkage , I need it all the way from the gas peddle to the carb. oh , and shipping to 35188? paypal ? thanks , Tony
also for the fuel line that goes from the pump to the carb.

PM sent

062500hd · 05-30-2014, 06:02 PM

Quote:

Originally Posted by Youey

Next in line for this *

I will contact you if we don't make a deal- Thanks-

Dirt's72 · 05-30-2014, 06:15 PM

Do you know if the valve cover is the same as one for a 292 with tube to air filter riser?

062500hd · 05-30-2014, 07:49 PM

Quote:

Originally Posted by Dirt's72

Do you know if the valve cover is the same as one for a 292 with tube to air filter riser?

….

I am unsure ....maybe someone who knows will chime in?

swamp rat · 05-30-2014, 11:59 PM

Quote:

Originally Posted by 062500hd

How does $50 sound-comes with a new- in - box internal module & rotor-

Is that 50 shipped? Can you post a couple pic's? Thanks.

beautimus · 05-31-2014, 10:23 PM

ttt

tommyd241 · 05-31-2014, 10:36 PM

I'll get in line for the complete power steering set-up.

062500hd · 06-01-2014, 06:56 AM

Quote:

Originally Posted by tommyd241

I'll get in line for the complete power steering set-up.

pm sent

04-25-2014, 07:24 PM	#1
062500hd Registered User Join Date: Apr 2008 Location: Brooks, Me Posts: 47	ME 250 Power steering setup & Parting 69 c/10 Parting My 1969 C/10 lwb- Complete power steering setup from 1969 250 including Pump with lines, all brackets, 2 groove balancer and 2 groove fan pulley, fan spacer and fan if needed, I can also remove the 2 groove alternator pulley (or sell the whole alternator) $300 Rear trailing arms, not sure on shipping or what these are really worth, no rust in exc. shape $200 I am keeping the glass, hood, seat, and cluster out of the truck, no bed, no doors,no fenders.. all other small parts and trinkets are available if I have them. I will list what I can over the next few days…. Attached Images Last edited by 062500hd; 04-28-2014 at 07:58 AM.

04-25-2014, 09:55 PM	#2
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: ME 250 Power steering setup & Parting 69 c/10 Are there any factory exhaust hangers revited to the frame or the cross member at the axle. If there are any very interested with pictures thanks.

04-26-2014, 10:26 AM	#4
062500hd Registered User Join Date: Apr 2008 Location: Brooks, Me Posts: 47	Re: ME 250 Power steering setup & Parting 69 c/10 Visors are black, ok shape with some stitching pulling out I will take a pic for you… no exhaust hangers that I can see but I will look closer….do you have a pic of what they look like? No Seatbelts….

04-26-2014, 01:32 PM	#5
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: ME 250 Power steering setup & Parting 69 c/10 The bracket on the left is the one toward the end of the frame for the tail pipe riveted to the outside of the frame rail. The bracket on the right is under the cab riveted to the inside of the frame rail. Thanks Attached Images

04-28-2014, 07:58 AM	#6
062500hd Registered User Join Date: Apr 2008 Location: Brooks, Me Posts: 47	Re: ME 250 Power steering setup & Parting 69 c/10 $300 New price on power steering!!

05-30-2014, 12:06 AM	#7
K5Rodder Registered User Join Date: May 2014 Location: Kannapolis, NC Posts: 79	Re: ME 250 Power steering setup & Parting 69 c/10 How much for the cross member for the trailing arms, the trailing arms, and mounts? Do 150 plus shipping?

05-30-2014, 05:15 AM	#8
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	Re: ME 250 Power steering setup & Parting 69 c/10 how much for the throttle linkage , I need it all the way from the gas peddle to the carb. oh , and shipping to 35188? paypal ? thanks , Tony also for the fuel line that goes from the pump to the carb. __________________ i survived cancer and kidney stones, but my kids are killing me.

05-30-2014, 05:26 AM	#9
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: ME 250 Power steering setup & Parting 69 c/10 Do i see a working 6 cyl HEI in that pic? I'm looking for one.. Let me know. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

05-30-2014, 09:01 AM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,832	Re: ME 250 Power steering setup & Parting 69 c/10 does the back window have the stainless trim on it? I am needing the long lower peace. If it is available please let me know __________________ 1967custom

05-30-2014, 11:18 AM	#11
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: ME 250 Power steering setup & Parting 69 c/10 How much for the air filter housing? zip 98387 __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

05-30-2014, 11:34 AM	#12
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,122	Re: ME 250 Power steering setup & Parting 69 c/10 That looks like the first "correct" 250 PS sys to be offered on here, in a long time. Be sure the double alt pulley goes with it. It is needed. Hard PS to find. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

05-30-2014, 06:15 PM	#20
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,104	Re: ME 250 Power steering setup & Parting 69 c/10 Do you know if the valve cover is the same as one for a 292 with tube to air filter riser?

05-31-2014, 10:23 PM	#23
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	Re: ME 250 Power steering setup & Parting 69 c/10 ttt __________________ i survived cancer and kidney stones, but my kids are killing me.

05-31-2014, 10:36 PM	#24
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: ME 250 Power steering setup & Parting 69 c/10 I'll get in line for the complete power steering set-up. __________________ '68 SWB Fleetside '98 K1500 Silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.