Picture of your truck with COWL HOOD??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70blackfish · 06-30-2014, 01:27 PM

just wanted to see pictures of your truck with cowl hoods, and how was fitment, and any pictures of the underside???

thanks!!!!

**CUSTOM/10** · 06-30-2014, 01:50 PM

I had 2 areas with fitment issues that my body guy fixed.

1) The top body line where the hood meets the cowl, the hood was narrower than the cowl, so the top of the cowl was pie cut and re-welded to correct that.
2) The pass side front of the hood ( where it meets the grille ) was bowed in, so he used a slide hammer with a wide hook to pull the leading edge of the hood out to close up the gap.

It looked great after he was done with it !

Gary

67ctener · 06-30-2014, 03:26 PM

That truck is absolutely perfect Gary! Beautiful truck

davepl · 06-30-2014, 03:29 PM

Hurry up and finish so I can buy that truck from you :-)

srvivor71 · 06-30-2014, 04:17 PM

Quote:

Originally Posted by 67ctener

that truck is absolutely perfect gary! Beautiful truck

x2!

srvivor71 · 06-30-2014, 04:20 PM

Quote:

Originally Posted by 70blackfish

just wanted to see pictures of your truck with cowl hoods, and how was fitment, and any pictures of the underside???

thanks!!!!

I think about doing a cowl hood once in awhile myself. I think I really like the look. I'd like to see pics of others who have done this too.

Fldawg · 06-30-2014, 05:30 PM

here's mine it was quite a pain in the butt to get lined up but after that it's great, the under hood pic isn't all that great but it gives you an idea

big d's red67 · 06-30-2014, 05:42 PM

Mine fit good, its about 4 years old. i have heard the newest 67 68 hoods don't fit well at all.

scotts72heavyhalf · 06-30-2014, 05:48 PM

I've got one on my 1969 Custom/10, fit great!

69lsxc10 · 06-30-2014, 06:44 PM

http://i943.photobucket.com/albums/a...pse7a9e8ee.jpg

69lsxc10 · 06-30-2014, 06:47 PM

colgad · 06-30-2014, 08:14 PM

Mine had a issue with the stamping on the driver side like it had been stamped twice. Hammer and dolly time and it was fine.

srvivor71 · 07-01-2014, 04:22 PM

Geez, I REALLY like all of these. Next time I have some spare money, I think I'm going to have to do this!

Molberg · 07-02-2014, 10:57 AM

Chopped up a factory hood to make mine.... fits great.

70blackfish · 07-02-2014, 12:06 PM

NICE molberg, haven't seen your truck on here before....

Molberg · 07-02-2014, 01:45 PM

Quote:

Originally Posted by 70blackfish

NICE molberg, haven't seen your truck on here before....

Thanks!

colgad · 07-02-2014, 06:56 PM

I could not resist to post this hood I saw in Zephyrhills FL

**LockDoc** · 07-02-2014, 07:48 PM

-
Fits pretty good. I need to make a little adjustment on it, it doesn't want to pop up when you pull the release....

LockDoc

JointTech · 07-02-2014, 09:15 PM

didnt figure you for a small tire guy LockDoc. Truck looks great. You got a build thread on it?

69chevytrucker · 07-02-2014, 09:55 PM

A guy i know this is his
Name: IMG1484.jpg
Views: 2220
Size: 74.9 KB

Name: IMG1483.jpg
Views: 2210
Size: 104.9 KB

Molberg · 07-02-2014, 11:35 PM

Quote:

Originally Posted by 69chevytrucker

A guy i know this is his
Attachment 1273407

Attachment 1273408

......wow!

Molberg · 07-02-2014, 11:38 PM

Quote:

Originally Posted by LockDoc

-
Fits pretty good. I need to make a little adjustment on it, it doesn't want to pop up when you pull the release....

LockDoc

A GM starter solenoid return spring tacked on a washer behind your hood striker pin will pop it up a good inch or so... Did it to mine. Works great.

**LockDoc** · 07-03-2014, 12:55 AM

Quote:

Originally Posted by JointTech

didnt figure you for a small tire guy LockDoc. Truck looks great. You got a build thread on it?

I'm a run what ya got guy...

No actual build thread but I have posted some updates on it here:

http://67-72chevytrucks.com/vboard/s...d.php?t=582242

Quote:

Originally Posted by Molberg

A GM starter solenoid return spring tacked on a washer behind your hood striker pin will pop it up a good inch or so... Did it to mine. Works great.

I did see the thread on that a while back. If I can't get it adjusted I might try it.

Thanks guys,
LockDoc

69chevytrucker · 07-03-2014, 02:46 AM

Quote:

Originally Posted by Molberg

......wow!

i know his truck is worth $70,000.00
Name: IMG1482.jpg
Views: 2086
Size: 112.1 KB

Name: IMG1486.jpg
Views: 2063
Size: 101.2 KB

Name: IMG1485.jpg
Views: 2075
Size: 109.9 KB

it is one of the best show trucks i have seen

slikside · 07-03-2014, 10:58 AM

Quote:

Originally Posted by colgad

I could not resist to post this hood I saw in Zephyrhills FL

lol! I'm glad you did. That's hilarious!

06-30-2014, 01:27 PM	#1
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Picture of your truck with COWL HOOD??? just wanted to see pictures of your truck with cowl hoods, and how was fitment, and any pictures of the underside??? thanks!!!! Attached Images __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

06-30-2014, 01:50 PM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Re: Picture of your truck with COWL HOOD??? I had 2 areas with fitment issues that my body guy fixed. 1) The top body line where the hood meets the cowl, the hood was narrower than the cowl, so the top of the cowl was pie cut and re-welded to correct that. 2) The pass side front of the hood ( where it meets the grille ) was bowed in, so he used a slide hammer with a wide hook to pull the leading edge of the hood out to close up the gap. It looked great after he was done with it ! Gary Attached Images __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

06-30-2014, 03:26 PM	#3
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Picture of your truck with COWL HOOD??? That truck is absolutely perfect Gary! Beautiful truck __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

06-30-2014, 03:29 PM	#4
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Picture of your truck with COWL HOOD??? Hurry up and finish so I can buy that truck from you :-) __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

06-30-2014, 05:30 PM	#7
Fldawg Registered User Join Date: Jan 2011 Location: Lynn Haven Florida Posts: 1,019	Re: Picture of your truck with COWL HOOD??? here's mine it was quite a pain in the butt to get lined up but after that it's great, the under hood pic isn't all that great but it gives you an idea Attached Images

06-30-2014, 05:42 PM	#8
big d's red67 Registered User Join Date: May 2010 Location: Broken Arrow Okla. Posts: 510	Re: Picture of your truck with COWL HOOD??? Mine fit good, its about 4 years old. i have heard the newest 67 68 hoods don't fit well at all. Attached Images __________________ 1967 swb 454 cid 700R4 trans SOLD 2006 Chevy Trailblazer SS 2013 Camaro RS convertible the wife's Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=573248

06-30-2014, 05:48 PM	#9
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Picture of your truck with COWL HOOD??? I've got one on my 1969 Custom/10, fit great! Attached Images __________________ Scotts72C10

06-30-2014, 06:44 PM	#10
69lsxc10 Registered User Join Date: Aug 2013 Location: FRESNO CALI Posts: 35	Re: Picture of your truck with COWL HOOD??? http://i943.photobucket.com/albums/a...pse7a9e8ee.jpg __________________ 1969 C10 SWB -- LS 5.3 4L60E , CC LT HEADERS, 2.5" X-PIPE ,P&P THROTTLE BODY, CAI, ELECTRIC FANS, 3:73 GEARS, TRAC LOCK, 22" BOYDS , VINTAGE AIR, DAKOTA DIGITAL, 2013 LTZ LEATHER SEATS, PIONEER DD NAVI, 4.5˝ FIBERGLASS COWL HOOD, MCGAUGHYS DISK BRAKE CONVERSION 2.5 DROP SPINDLE 6/8 STATIC DROP .

06-30-2014, 06:47 PM	#11
69lsxc10 Registered User Join Date: Aug 2013 Location: FRESNO CALI Posts: 35	Re: Picture of your truck with COWL HOOD??? __________________ 1969 C10 SWB -- LS 5.3 4L60E , CC LT HEADERS, 2.5" X-PIPE ,P&P THROTTLE BODY, CAI, ELECTRIC FANS, 3:73 GEARS, TRAC LOCK, 22" BOYDS , VINTAGE AIR, DAKOTA DIGITAL, 2013 LTZ LEATHER SEATS, PIONEER DD NAVI, 4.5˝ FIBERGLASS COWL HOOD, MCGAUGHYS DISK BRAKE CONVERSION 2.5 DROP SPINDLE 6/8 STATIC DROP .

06-30-2014, 08:14 PM	#12
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: Picture of your truck with COWL HOOD??? Mine had a issue with the stamping on the driver side like it had been stamped twice. Hammer and dolly time and it was fine. Attached Images __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

07-01-2014, 04:22 PM	#13
srvivor71 Registered User Join Date: Sep 2010 Location: Sullivan County, NY Posts: 455	Re: Picture of your truck with COWL HOOD??? Geez, I REALLY like all of these. Next time I have some spare money, I think I'm going to have to do this!

07-02-2014, 10:57 AM	#14
Molberg Registered User Join Date: Dec 2012 Location: Manitoba Posts: 644	Re: Picture of your truck with COWL HOOD??? Chopped up a factory hood to make mine.... fits great. Attached Images __________________ -Project Nitemare- http://67-72chevytrucks.com/vboard/s...d.php?t=607359

07-02-2014, 12:06 PM	#15
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Picture of your truck with COWL HOOD??? NICE molberg, haven't seen your truck on here before.... __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

07-02-2014, 06:56 PM	#17
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: Picture of your truck with COWL HOOD??? I could not resist to post this hood I saw in Zephyrhills FL Attached Images __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

07-02-2014, 07:48 PM	#18
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,357	Re: Picture of your truck with COWL HOOD??? - Fits pretty good. I need to make a little adjustment on it, it doesn't want to pop up when you pull the release.... LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

07-02-2014, 09:15 PM	#19
JointTech Registered User Join Date: Feb 2012 Location: Mission Viejo, CA Posts: 1,856	Re: Picture of your truck with COWL HOOD??? didnt figure you for a small tire guy LockDoc. Truck looks great. You got a build thread on it? __________________ 72 C20 Long Bed SB350 TH400 14 bolt rear end Extremely boring build thread

07-02-2014, 09:55 PM	#20
69chevytrucker Registered User Join Date: Apr 2014 Location: calgary alberta Posts: 1,248	Re: Picture of your truck with COWL HOOD??? A guy i know this is his

Register or Log In To remove these advertisements.