KS Parting a 72 chevy C20 highlander with AC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 02-23-2015, 09:37 PM

If your needing parts quickly, sorry. I WILL NOT START PARTING THIS TRUCK TILL NEXT MONDAY!!!!!!
I ship fed ex and USPS only!!
I take pay pal with fees
And USPS money orders
Some parts are sold already
tilt -sold
seat -sold
door panels -sold
visors -sold
radio -sold
ac control -sold
lighter -sold
seat belts-sold
center ac vent -sold
inner grill -sold
oil filler and grommet -sold
motor pullies -sold
ps pump and brackets -sold
air cleaner -sold
rear end -sale pending
side mirrors -sold
disc brake frontend- $100 picked up, no ship
brake booster setup $80 shipped sale pending
bare motor and th350 tranny-SOLD
outer grill is bad
cab SOLD
bed has dents
doors have rust
sway bar setup $85 shipped
alt brackets $33 shipped
shroud $75 shipped
upper and lower 4 core radiator holders $36 shpped SOLD
AT linkage $42 shipped
AT crossmember $50 shipped
AC dash $165 shipped
gauge setup $60 shipped
outer AC vents-SOLD
AC parts
AC brackets
carb
exhaust manifolds
see anything else ask and I will price
Thanks Randy

teeitup · 02-23-2015, 09:38 PM

1111

teeitup · 02-23-2015, 09:39 PM

222

teeitup · 02-23-2015, 09:40 PM

33333333

teeitup · 02-23-2015, 09:41 PM

4444

teeitup · 02-23-2015, 09:42 PM

5555555555

**Curtb1971** · 02-23-2015, 09:45 PM

Hey Randy, I'll take the 4 core supports, putter AC vents and the headlamp and wiper knob if available.
Thanks Curt

**Curtb1971** · 02-23-2015, 09:47 PM

I also need left and right kick panel vents for a non-ac truck if you have a pair.

1972 Jimmy · 02-23-2015, 09:49 PM

Randy,
What shape are the vent windows are in? If they are in good shape how much would you want?
Eric

**Curtb1971** · 02-23-2015, 09:49 PM

Oh and a cig lighter assembly with harness

Jake1971 · 02-23-2015, 09:50 PM

Hey Randy,
I am searching for:
1. Three '68-'72 rear tail light harnesses in decent condition (hopefully unmolested) (the ones that go from the crossmember to the lights).
2. Firewall insulation pads (left and center ones)
3. Black rubber mat and light blue (522?) carpet.
4. driver's side steel door panel.
As soon as Randy posts a new parting out thread, the vultures are circling...

Old362 · 02-23-2015, 10:01 PM

Randy i would like the jack the tire tool ,jack tool and bag thanks Gary

**71blksuper4x4** · 02-23-2015, 10:02 PM

Custom camper emblems? Pics of hitch too Randy. Trevor

teeitup · 02-23-2015, 10:04 PM

Curt,
4 cores $30
outer AC vents $25
headlight and wiper knob $8
then shipping
Right now I don't have any pass kick panel vents but I'm hauling in a 71 this week that may have a good one in it. Cig lighter is sold, I have another one out there, I can get a pic Tues night

Eric, pass is awesome, drivers has some chrome wear. $70 plus shipping for pair

Paul, I will look on harness. This one has black carpet. I'll try to save the firewall pads. I have a couple door panels out there I will look at them

Thanks Randy

Old362 · 02-23-2015, 10:06 PM

Quote:

Originally Posted by Old362

Randy i would like the jack the tire tool ,jack tool and bag thanks Gary

To make it official i guess i shall say Ill take the jack the tire tool, jack tool and bag pending price. Thanks.

teeitup · 02-23-2015, 10:07 PM

Gary, $60 for the jack setup and bag

Trevor, $20 for the set, hopefully the studs will not break off when I remove them. The hitch is welded to the bumper, kind of strange deal

Thanks Randy

**Cash3481** · 02-23-2015, 10:15 PM

Randy,
Is this a posi reared?
I'm interested on being in line if it is.

**71blksuper4x4** · 02-23-2015, 10:16 PM

Throw the emblems in my pile. Trevor

**Curtb1971** · 02-23-2015, 10:19 PM

Cool, I'll take the 4-core radiator supports, outter ac vents, wiper and headlamp knobs and wait to hear from you Tuesday on the cig lighter. I guess lets hold off shipping til you get the other truck in and take a look at the kick panel vents.
Thanks again

teeitup · 02-23-2015, 10:24 PM

Mike, I don't think it is, I'll have to pull cover and look

Ok Trevor they are yours

Curt, those parts are yours and I will get pics of lighter and check out the vent in other truck when it gets here

Thanks Randy

engairuph · 02-23-2015, 10:24 PM

Accelerator rod that bolts to the firewall and inside and the parts that bolts to the outer firewall.

Old362 · 02-23-2015, 10:26 PM

$60 for the jack setup and bag sounds good thank you Gary

teeitup · 02-23-2015, 10:26 PM

Ralph this is the cable setup for gas pedal

teeitup · 02-23-2015, 10:27 PM

OK Gary, it is yours, Thanks Randy

Jake1971 · 02-23-2015, 10:49 PM

Quote:

Originally Posted by Jake1971

Hey Randy,
I am searching for:
1. Three '68-'72 rear tail light harnesses in decent condition (hopefully unmolested) (the ones that go from the crossmember to the lights).
2. Firewall insulation pads (left and center ones)
3. Black rubber mat and light blue (522?) carpet.
4. driver's side steel door panel.
As soon as Randy posts a new parting out thread, the vultures are circling...

Also looking for a pair of High and Low tone horns like these. Thanks!

Name: Hi and Low tone horns.jpg
Views: 758
Size: 80.7 KB

02-23-2015, 09:37 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Parting a 72 chevy C20 highlander with AC If your needing parts quickly, sorry. I WILL NOT START PARTING THIS TRUCK TILL NEXT MONDAY!!!!!! I ship fed ex and USPS only!! I take pay pal with fees And USPS money orders Some parts are sold already tilt -sold seat -sold door panels -sold visors -sold radio -sold ac control -sold lighter -sold seat belts-sold center ac vent -sold inner grill -sold oil filler and grommet -sold motor pullies -sold ps pump and brackets -sold air cleaner -sold rear end -sale pending side mirrors -sold disc brake frontend- $100 picked up, no ship brake booster setup $80 shipped sale pending bare motor and th350 tranny-SOLD outer grill is bad cab SOLD bed has dents doors have rust sway bar setup $85 shipped alt brackets $33 shipped shroud $75 shipped upper and lower 4 core radiator holders $36 shpped SOLD AT linkage $42 shipped AT crossmember $50 shipped AC dash $165 shipped gauge setup $60 shipped outer AC vents-SOLD AC parts AC brackets carb exhaust manifolds see anything else ask and I will price Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-01-2015 at 09:52 PM.

02-23-2015, 09:38 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 chevy C20 highlander with AC 1111 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2015, 09:39 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 chevy C20 highlander with AC 222 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2015, 09:40 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 chevy C20 highlander with AC 33333333 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2015, 09:41 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 chevy C20 highlander with AC 4444 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2015, 09:42 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 chevy C20 highlander with AC 5555555555 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2015, 09:45 PM	#7
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Parting a 72 chevy C20 highlander with AC Hey Randy, I'll take the 4 core supports, putter AC vents and the headlamp and wiper knob if available. Thanks Curt

02-23-2015, 09:47 PM	#8
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Parting a 72 chevy C20 highlander with AC I also need left and right kick panel vents for a non-ac truck if you have a pair.

02-23-2015, 09:49 PM	#9
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: Parting a 72 chevy C20 highlander with AC Randy, What shape are the vent windows are in? If they are in good shape how much would you want? Eric

02-23-2015, 09:50 PM	#11
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: Parting a 72 chevy C20 highlander with AC Hey Randy, I am searching for: 1. Three '68-'72 rear tail light harnesses in decent condition (hopefully unmolested) (the ones that go from the crossmember to the lights). 2. Firewall insulation pads (left and center ones) 3. Black rubber mat and light blue (522?) carpet. 4. driver's side steel door panel. As soon as Randy posts a new parting out thread, the vultures are circling... __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

02-23-2015, 10:01 PM	#12
Old362 Registered User Join Date: Jan 2015 Location: Winfield. Kansas Posts: 51	Re: Parting a 72 chevy C20 highlander with AC Randy i would like the jack the tire tool ,jack tool and bag thanks Gary

02-23-2015, 10:02 PM	#13
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,150	Re: Parting a 72 chevy C20 highlander with AC Custom camper emblems? Pics of hitch too Randy. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-23-2015, 10:04 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 chevy C20 highlander with AC Curt, 4 cores $30 outer AC vents $25 headlight and wiper knob $8 then shipping Right now I don't have any pass kick panel vents but I'm hauling in a 71 this week that may have a good one in it. Cig lighter is sold, I have another one out there, I can get a pic Tues night Eric, pass is awesome, drivers has some chrome wear. $70 plus shipping for pair Paul, I will look on harness. This one has black carpet. I'll try to save the firewall pads. I have a couple door panels out there I will look at them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2015, 10:07 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 chevy C20 highlander with AC Gary, $60 for the jack setup and bag Trevor, $20 for the set, hopefully the studs will not break off when I remove them. The hitch is welded to the bumper, kind of strange deal Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2015, 10:15 PM	#17
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting a 72 chevy C20 highlander with AC Randy, Is this a posi reared? I'm interested on being in line if it is. __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!



Register or Log In To remove these advertisements.

02-23-2015, 10:16 PM	#18
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,150	Re: Parting a 72 chevy C20 highlander with AC Throw the emblems in my pile. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-23-2015, 10:19 PM	#19
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Parting a 72 chevy C20 highlander with AC Cool, I'll take the 4-core radiator supports, outter ac vents, wiper and headlamp knobs and wait to hear from you Tuesday on the cig lighter. I guess lets hold off shipping til you get the other truck in and take a look at the kick panel vents. Thanks again

02-23-2015, 10:24 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 chevy C20 highlander with AC Mike, I don't think it is, I'll have to pull cover and look Ok Trevor they are yours Curt, those parts are yours and I will get pics of lighter and check out the vent in other truck when it gets here Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2015, 10:24 PM	#21
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting a 72 chevy C20 highlander with AC Accelerator rod that bolts to the firewall and inside and the parts that bolts to the outer firewall. __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

02-23-2015, 10:26 PM	#22
Old362 Registered User Join Date: Jan 2015 Location: Winfield. Kansas Posts: 51	Re: Parting a 72 chevy C20 highlander with AC $60 for the jack setup and bag sounds good thank you Gary

02-23-2015, 10:27 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 chevy C20 highlander with AC OK Gary, it is yours, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.