Blaster in MD - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rydeordie · 06-22-2015, 07:50 AM

Does anyone know someone who could blast my frame for me in the DMV? I could possibly travel up to an hour or so....Thanks!

**special-K** · 06-22-2015, 08:26 AM

Grables Commercial Painting
11726 Keymar, Rd.
Keymar, MD 21757

(410) 775-2434

He's done all my bigger than cabinet blasting for 25-30 years

rydeordie · 06-22-2015, 08:39 PM

Ok he's not too far from me. Just tell him Tim referred me?

**special-K** · 06-22-2015, 09:09 PM

Yep, my last name is Hicks. Terry Grable is his name. It's a bit of a truck from Ft. Washington. His house is next door, so you could drop off anytime.

cherokeejohn · 06-23-2015, 12:02 AM

I agree with Tim. You can tell him Indian John sent you also...your lookin at about a 2 hour-ish ride from Ft Washington, with light traffic. Also as Tim stated, he lives right there, and I personally have been there at 9;30 PM so he will work with you on meeting times. Good guy, good work.

**special-K** · 06-23-2015, 09:07 AM

Hey Cherokee John, thanks for backing me up. Are you thinking about going to the rod run in Winfield Sunday? And rydeordie, if you could arrange/manage getting it up there Sunday yu could come see the show and I could run up there with you to as navigator. It's not all that hard to find, but is up there among the corn fields...sorta remote to someone not local. He's pretty much a straight shot north of me a bit. Just sayin' Sunday would probably make for the best traffic and you could see a good car show, as well as meet an a-ho*...I mean another member or two while you're at it.

*

cwheeler2584 · 06-23-2015, 06:50 PM

Quote:

Originally Posted by rydeordie

Does anyone know someone who could blast my frame for me in the DMV? I could possibly travel up to an hour or so....Thanks!

Chesapeake Blasting is Located in Owings,MD. Maybe about a 40 min ride from Ft Washington. He does anytime of blasting(soda blasting,glass,sand etc.). Mike is a nice guy and is very reasonable with his pricing. He does all my blasting and my customers.

06-22-2015, 07:50 AM	#1
rydeordie Registered User Join Date: Nov 2014 Location: Fort Washington, MD Posts: 202	Blaster in MD Does anyone know someone who could blast my frame for me in the DMV? I could possibly travel up to an hour or so....Thanks! __________________ Instagram: rydeordie72 https://instagram.com/rydeordiechevy/

06-22-2015, 08:26 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Blaster in MD Grables Commercial Painting 11726 Keymar, Rd. Keymar, MD 21757 (410) 775-2434 He's done all my bigger than cabinet blasting for 25-30 years __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-22-2015, 08:39 PM	#3
rydeordie Registered User Join Date: Nov 2014 Location: Fort Washington, MD Posts: 202	Re: Blaster in MD Ok he's not too far from me. Just tell him Tim referred me? __________________ Instagram: rydeordie72 https://instagram.com/rydeordiechevy/

06-22-2015, 09:09 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Blaster in MD Yep, my last name is Hicks. Terry Grable is his name. It's a bit of a truck from Ft. Washington. His house is next door, so you could drop off anytime. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-23-2015, 12:02 AM	#5
cherokeejohn Registered User Join Date: Aug 2013 Location: Wasteminster, Maryland Posts: 409	Re: Blaster in MD I agree with Tim. You can tell him Indian John sent you also...your lookin at about a 2 hour-ish ride from Ft Washington, with light traffic. Also as Tim stated, he lives right there, and I personally have been there at 9;30 PM so he will work with you on meeting times. Good guy, good work. __________________ 72 C/10, LWB, 5.7, Auto, with A/C F.B.I = Full Blood Indian Appalachia/Eastern Cherokee,"Tsalagi"

06-23-2015, 09:07 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Blaster in MD Hey Cherokee John, thanks for backing me up. Are you thinking about going to the rod run in Winfield Sunday? And rydeordie, if you could arrange/manage getting it up there Sunday yu could come see the show and I could run up there with you to as navigator. It's not all that hard to find, but is up there among the corn fields...sorta remote to someone not local. He's pretty much a straight shot north of me a bit. Just sayin' Sunday would probably make for the best traffic and you could see a good car show, as well as meet an a-ho...I mean another member or two while you're at it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.