WTB: Needing brackets for 250 6 cylinder power steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**wthompson** · 10-09-2015, 02:30 PM

I am changing my 1968 6 cylinder from manual to power steering and I have everything but the brackets. Please let me know where I can get them or if anyone has some to sell

EARNHARDT#3 · 10-09-2015, 03:01 PM

http://www.ebay.com/ulk/itm/361402026788

**wthompson** · 10-09-2015, 04:21 PM

Earnhardt#3, I don't think those are the full brackets?

**leddzepp** · 10-09-2015, 05:07 PM

Here is what you need: http://67-72chevytrucks.com/vboard/s...d.php?t=650868

I sold that setup a while ago, but it shows the brackets off the truck so you can identify them.

EARNHARDT#3 · 10-09-2015, 06:50 PM

Quote:

Originally Posted by wthompson

Earnhardt#3, I don't think those are the full brackets?

Those are the 3 pieces mine has. One mounts to the head, one kind of cradles underneath the pump and the other on goes down to the alternator.

Gromit · 10-09-2015, 07:11 PM

http://www.alangrovecomponents.com/C...x_Cylinder.htm

I have nothing to do with this company and have never bought from them, but I know they make the brackets for many motors and have been in business for several years.

**wthompson** · 10-09-2015, 10:36 PM

Thanks for the info. Is that as cheap as they get.

EARNHARDT#3 · 10-10-2015, 08:26 AM

Quote:

Originally Posted by wthompson

Thanks for the info. Is that as cheap as they get.

You may look for years and never find them and still pay that much. The sellers phone number is there as well so you can call and talk to him.

FlameOut · 10-10-2015, 08:39 AM

I had a complete set and pretty much gave them away before knowing what they were worth. I think I got $25. Ever since then, I seemed to have turned into a horder, vowing not to be scammed again

**Jason Banks** · 10-10-2015, 06:20 PM

Keep watching ebay. The first set I bought I paid about $180 and it included a pump and all the hardware and spacers. Since then I found a set for around $80.

BMERDOC · 10-10-2015, 07:38 PM

I have the main bracket and at least one of the other brackets. I had the main bracket in my hand today and I have to find the other.

BCOWANWHEELS · 10-10-2015, 11:44 PM

Hum, my truck has double belts and its factory. 250 eng.

**wthompson** · 10-12-2015, 09:48 AM

Bmerdoc, You have the full brackets, if so are they for sale?

BMERDOC · 10-12-2015, 10:23 AM

I know I have the main bracket but I'm not sure about the others. I had to buy several incomplete sets to do my conversion. I've been looking for them as I go through my stuff looking for other stuff.

10-09-2015, 02:30 PM	#1
wthompson Active Member Join Date: Aug 2013 Location: Augusta Kansas Posts: 108	WTB: Needing brackets for 250 6 cylinder power steering I am changing my 1968 6 cylinder from manual to power steering and I have everything but the brackets. Please let me know where I can get them or if anyone has some to sell Attached Images

10-09-2015, 03:01 PM	#2
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: WTB: Needing brackets for 250 6 cylinder power steering http://www.ebay.com/ulk/itm/361402026788 __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

10-09-2015, 05:07 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,992	Re: WTB: Needing brackets for 250 6 cylinder power steering Here is what you need: http://67-72chevytrucks.com/vboard/s...d.php?t=650868 I sold that setup a while ago, but it shows the brackets off the truck so you can identify them. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

10-09-2015, 07:11 PM	#6
Gromit Registered User Join Date: Jul 2015 Location: Central Coast, CA Posts: 500	Re: WTB: Needing brackets for 250 6 cylinder power steering http://www.alangrovecomponents.com/C...x_Cylinder.htm I have nothing to do with this company and have never bought from them, but I know they make the brackets for many motors and have been in business for several years.

10-09-2015, 10:36 PM	#7
wthompson Active Member Join Date: Aug 2013 Location: Augusta Kansas Posts: 108	Re: WTB: Needing brackets for 250 6 cylinder power steering Thanks for the info. Is that as cheap as they get.

10-09-2015, 04:21 PM	#3
wthompson Active Member Join Date: Aug 2013 Location: Augusta Kansas Posts: 108	Re: WTB: Needing brackets for 250 6 cylinder power steering Earnhardt#3, I don't think those are the full brackets?

10-10-2015, 08:39 AM	#9
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Re: WTB: Needing brackets for 250 6 cylinder power steering I had a complete set and pretty much gave them away before knowing what they were worth. I think I got $25. Ever since then, I seemed to have turned into a horder, vowing not to be scammed again __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS

10-10-2015, 06:20 PM	#10
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,535	Re: WTB: Needing brackets for 250 6 cylinder power steering Keep watching ebay. The first set I bought I paid about $180 and it included a pump and all the hardware and spacers. Since then I found a set for around $80.

10-10-2015, 07:38 PM	#11
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: WTB: Needing brackets for 250 6 cylinder power steering I have the main bracket and at least one of the other brackets. I had the main bracket in my hand today and I have to find the other. __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

10-10-2015, 11:44 PM	#12
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: WTB: Needing brackets for 250 6 cylinder power steering Hum, my truck has double belts and its factory. 250 eng. __________________ I BELIEVE IN JOHN 3:16

10-12-2015, 09:48 AM	#13
wthompson Active Member Join Date: Aug 2013 Location: Augusta Kansas Posts: 108	Re: WTB: Needing brackets for 250 6 cylinder power steering Bmerdoc, You have the full brackets, if so are they for sale?

10-12-2015, 10:23 AM	#14
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: WTB: Needing brackets for 250 6 cylinder power steering I know I have the main bracket but I'm not sure about the others. I had to buy several incomplete sets to do my conversion. I've been looking for them as I go through my stuff looking for other stuff. __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.