1964 Chevy K10 Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sampsmit000 · 12-05-2015, 02:00 AM

This is my factory 4x4 K10 Chevy that I am restoring. It is a short wheel base, fleet side, and has a big window. These are pictures of what I have done on it so far. I have since blasted the bed as well.

sampsmit000 · 12-05-2015, 02:02 AM

More Pictures

dodgiesdad · 12-05-2015, 06:56 AM

Good looking progress! I love the look you have going. What are your plans?

sampsmit000 · 12-05-2015, 11:33 AM

Quote:

Originally Posted by dodgiesdad

Good looking progress! I love the look you have going. What are your plans?

Since it is already not original, my plan is to give it a classic look but with some modern commodities. I am going to put a/c and have moved the gas tank to the back. The engine is a rebuild 350 and has 411hp. My hope is to get it done by summer, but I really have no deadline.
Posted via Mobile Device

**Mathew21** · 12-05-2015, 11:47 AM

Great work. Keep us updated with the progress.

dodgiesdad · 12-06-2015, 12:29 AM

Agree with the "keep us updated". You should consider starting a thread in the "Projects and Builds section". I am doing a very similar build on mine. What color(s) are you going to be using?

sampsmit000 · 12-06-2015, 12:37 AM

Quote:

Originally Posted by dodgiesdad

Agree with the "keep us updated". You should consider starting a thread in the "Projects and Builds section". I am doing a very similar build on mine. What color(s) are you going to be using?

I am doing a two tone color. Either Red and White. Or that sort of turquoise color but a little more green and white and a gray interior

Bodhi · 12-06-2015, 09:54 PM

Looking great Boss!

63 & 64 Bowties · 12-07-2015, 11:26 AM

Quote:

Originally Posted by dodgiesdad

You should consider starting a thread in the "Projects and Builds section".

I just moved this one into the Projects & Builds area for him.

sampsmit000 · 12-07-2015, 12:26 PM

Quote:

Originally Posted by 63 & 64 Bowties

I just moved this one into the Projects & Builds area for him.

Thanks. Didn't know how to move it!
Posted via Mobile Device

**66ChevyMax** · 12-07-2015, 01:52 PM

Great start!

sampsmit000 · 12-07-2015, 06:17 PM

Here's my work from last night. Trying to get the bed ready for paint then put it away and work on the cab and front clip.

**TJ's Chevy** · 12-27-2015, 11:59 PM

I'm late joining the party, but sweet truck man!

62stepside longbox · 12-28-2015, 02:52 AM

Nice truck, are you planning on keeping the 60 grille? Keep us updated on what your doing to the truck and we like pics!

sampsmit000 · 12-28-2015, 02:54 AM

Quote:

Originally Posted by 62stepside longbox

Nice truck, are you planning on keeping the 60 grille? Keep us updated on what your doing to the truck and we like pics!

I'm going to chrome it and see how I like it! That is something that is simple to Change once I'm done if I want too!
Posted via Mobile Device

sampsmit000 · 01-03-2016, 07:36 PM

Finally finished the body work on the bed! Hopefully going to get some epoxy primer down this weekend! Then I'm hoping to put high build on and block it, then put it away and work on the cab!

**TJ's Chevy** · 01-03-2016, 09:08 PM

NO PICTURES?????

sampsmit000 · 01-03-2016, 09:43 PM

Quote:

Originally Posted by TJ's Chevy

NO PICTURES?????

I'll get pictures up later tonight!
Posted via Mobile Device

sampsmit000 · 01-03-2016, 11:14 PM

It will only let me upload one pic at a time! So they will all be in individual post!
Posted via Mobile Device

sampsmit000 · 01-03-2016, 11:15 PM

02
Posted via Mobile Device

sampsmit000 · 01-03-2016, 11:16 PM

03
Posted via Mobile Device

sampsmit000 · 01-03-2016, 11:17 PM

04
Posted via Mobile Device

sampsmit000 · 01-03-2016, 11:18 PM

05
Posted via Mobile Device

sampsmit000 · 01-03-2016, 11:19 PM

06
Posted via Mobile Device

**clemdaddy** · 01-04-2016, 08:27 AM

60 grill, jimmy hood… both are cool installs. really like the direction you're taking.

on the pics, for me, i can do multiple pics but they have to be uploaded individually… pick one then upload, pick another then upload… up to 5, then post. i hear its different for other folks but you might try that.

nice truck… keep after it, summer will be here pretty soon.

12-05-2015, 02:00 AM	#1
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	1964 Chevy K10 Build This is my factory 4x4 K10 Chevy that I am restoring. It is a short wheel base, fleet side, and has a big window. These are pictures of what I have done on it so far. I have since blasted the bed as well. Attached Images

12-05-2015, 02:02 AM	#2
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964 Chevy K10 Build More Pictures Attached Images

12-05-2015, 06:56 AM	#3
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	Re: 1964 Chevy K10 Build Good looking progress! I love the look you have going. What are your plans?

12-05-2015, 11:47 AM	#5
Mathew21 Senior Member Join Date: May 2010 Location: Clinton township, MI Posts: 1,191	Re: 1964 Chevy K10 Build Great work. Keep us updated with the progress. __________________ It only has original paint once

12-06-2015, 12:29 AM	#6
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	Re: 1964 Chevy K10 Build Agree with the "keep us updated". You should consider starting a thread in the "Projects and Builds section". I am doing a very similar build on mine. What color(s) are you going to be using?

12-06-2015, 09:54 PM	#8
Bodhi Registered User Join Date: Oct 2014 Location: Tennessee Posts: 11	Re: 1964 Chevy K10 Build Looking great Boss! __________________ 1982 Chevy K20 350 Small Block 700r4 Trans 3/4 Ton Axles 35" BF Goodrich

12-07-2015, 01:52 PM	#11
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: 1964 Chevy K10 Build Great start! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

12-07-2015, 06:17 PM	#12
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964 Chevy K10 Build Here's my work from last night. Trying to get the bed ready for paint then put it away and work on the cab and front clip. Attached Images

12-27-2015, 11:59 PM	#13
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 Chevy K10 Build I'm late joining the party, but sweet truck man! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-28-2015, 02:52 AM	#14
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: 1964 Chevy K10 Build Nice truck, are you planning on keeping the 60 grille? Keep us updated on what your doing to the truck and we like pics! __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

01-03-2016, 07:36 PM	#16
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964 Chevy K10 Build Finally finished the body work on the bed! Hopefully going to get some epoxy primer down this weekend! Then I'm hoping to put high build on and block it, then put it away and work on the cab! __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

01-03-2016, 09:08 PM	#17
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 Chevy K10 Build NO PICTURES????? __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-03-2016, 11:14 PM	#19
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	It will only let me upload one pic at a time! So they will all be in individual post! Posted via Mobile Device Attached Images

01-03-2016, 11:15 PM	#20
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	02 Posted via Mobile Device Attached Images

01-03-2016, 11:16 PM	#21
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	03 Posted via Mobile Device Attached Images



Register or Log In To remove these advertisements.

01-03-2016, 11:17 PM	#22
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	04 Posted via Mobile Device Attached Images

01-03-2016, 11:18 PM	#23
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	05 Posted via Mobile Device Attached Images

01-03-2016, 11:19 PM	#24
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	06 Posted via Mobile Device Attached Images

01-04-2016, 08:27 AM	#25
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: 1964 Chevy K10 Build 60 grill, jimmy hood… both are cool installs. really like the direction you're taking. on the pics, for me, i can do multiple pics but they have to be uploaded individually… pick one then upload, pick another then upload… up to 5, then post. i hear its different for other folks but you might try that. nice truck… keep after it, summer will be here pretty soon.

Register or Log In To remove these advertisements.