Few pics of Blown 383 build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hardwaycooke · 07-31-2016, 08:22 PM

Almost done. Need to nar row rear and install better axles, install larger stall. get 1 piece drive shaft installed, etc...button up some stuff. Just driving her around now breaking her in, checking temps and such, looking for leaks. Been to 2 shows over past 3 weeks. Won Truck Best of Show, Best Engine x 2, Best Custom Truck...and Exhaust Wars for Loudest Exhaust..lol. Just wanted to show her off a little..

**jocko** · 07-31-2016, 08:51 PM

congrats! How much do you think the local constabulary will harass you? My guess is a lot. But I'm guessing you could always outrun em.

hardwaycooke · 07-31-2016, 08:56 PM

Quote:

Originally Posted by jocko

congrats! How much do you think the local constabulary will harass you? My guess is a lot. But I'm guessing you could always outrun em.

they're usually pretty cool long as you're not "acting up"..lol

**VetteVet** · 07-31-2016, 10:24 PM

Wow! Dennis, that looks great. I can't wait to see it in person. Were are you going to put all those trophies?
I knew you must be busy since I hadn't heard from you.

trac209 · 08-01-2016, 01:35 AM

Looks awesome

cleszkie · 08-01-2016, 02:41 PM

How low a compression are you running in that 383 to be able to run that blower?

hardwaycooke · 08-01-2016, 09:31 PM

Quote:

Originally Posted by VetteVet

Wow! Dennis, that looks great. I can't wait to see it in person. Were are you going to put all those trophies?
I knew you must be busy since I hadn't heard from you.

Thx Vet!!!!!!!!!!!!!! Still dont have that batery gauge working...LOL...I'll call you asap...this week. Cant wait to hang with you...!!!!!

hardwaycooke · 08-01-2016, 09:32 PM

Quote:

Originally Posted by trac209

Looks awesome

thx man!!

hardwaycooke · 08-01-2016, 09:33 PM

Quote:

Originally Posted by cleszkie

how low a compression are you running in that 383 to be able to run that blower?

8.1

*ck5566* · 08-02-2016, 09:09 PM

I love your Bumper Guards. No one would think of getting close to your truck. It looks Mid Evil. And that's no joke!

jeh · 08-02-2016, 09:40 PM

Awesome truck!!!

**VetteVet** · 08-03-2016, 12:07 PM

Quote:

Originally Posted by jeh

Awesome truck!!!

Times two.

I've ridden in it when it was just a 383 stroker, and it would smoke the tires then, I can't wait to get down to see Dennis and ride in it now. VV

hardwaycooke · 08-06-2016, 04:35 PM

Quote:

Originally Posted by ck5566

I love your Bumper Guards. No one would think of getting close to your truck. It looks Mid Evil. And that's no joke!

thx..have those eveerywhere..wheel lugs, mirrors, inside, engine bay..

hardwaycooke · 08-06-2016, 04:36 PM

Quote:

Originally Posted by VetteVet

Times two.

I've ridden in it when it was just a 383 stroker, and it would smoke the tires then, I can't wait to get down to see Dennis and ride in it now. VV

ME TOO!!! Still babying her...waiting for you!!!

adricar1 · 08-07-2016, 06:17 AM

i have a similar set up i am building here in the united kingdom. did you the v8 mounts of the straight 6 mounts? how much clearence do you have to the radiator? a photo would be great, and if possible a photp of the way you have piped up the fuel system to the carbs

best wishes adrian.

midniteblues · 08-07-2016, 01:44 PM

That's sweet truck hardway.

Glad too see those little filters in there so you don't suck up pterodactyl or small planes and chew them up and fart them out the exhaust.

There is a fella I know down below reading here that has a 69 swb set up the same way he built a sweet alum. bed cover for his too cover up the narrowed rear end and cut bed floor. He incorporated a nascar style spoiler built into the bed cover I loved the way he did that.
Last I saw it the truck was all blacked out but I think he got it painted by now.

hardwaycooke · 08-07-2016, 03:11 PM

Quote:

Originally Posted by adricar1

i have a similar set up i am building here in the united kingdom. did you the v8 mounts of the straight 6 mounts? how much clearence do you have to the radiator? a photo would be great, and if possible a photp of the way you have piped up the fuel system to the carbs

best wishes adrian.

I used aftermarket CPP Mounts..great fitment. I used my mechanical fan. Had to use a 2" fan spacer to clear blower pulley. Have a large rad too. I used fwd facing edelbrock carbs. made a bracket for my regulator. I'll get a pic.

hardwaycooke · 08-07-2016, 03:17 PM

Quote:

Originally Posted by midniteblues

That's sweet truck hardway.

Glad too see those little filters in there so you don't suck up pterodactyl or small planes and chew them up and fart them out the exhaust.

There is a fella I know down below reading here that has a 69 swb set up the same way he built a sweet alum. bed cover for his too cover up the narrowed rear end and cut bed floor. He incorporated a nascar style spoiler built into the bed cover I loved the way he did that.
Last I saw it the truck was all blacked out but I think he got it painted by now.

Yeah man...nothing getting into my baby that doesnt belong.lol Im not following the covering of the narrowed rear unles he's bagged...Im not. Like to see that truck. Im fabbing a front metal spoiler for below the bumper..

07-31-2016, 08:22 PM	#1
hardwaycooke Registered User Join Date: Sep 2013 Location: anderson, sc Posts: 647	Few pics of Blown 383 build Almost done. Need to nar row rear and install better axles, install larger stall. get 1 piece drive shaft installed, etc...button up some stuff. Just driving her around now breaking her in, checking temps and such, looking for leaks. Been to 2 shows over past 3 weeks. Won Truck Best of Show, Best Engine x 2, Best Custom Truck...and Exhaust Wars for Loudest Exhaust..lol. Just wanted to show her off a little.. Attached Images __________________ 71 LWB Large Bore 6-71 Blown 383 Stroker 4.11 Motive/EOM Eaton Posi Ported/Polished Carrier 15x8/15x16.5 MT Radials B&M Pro Shifter Truck Name- Spike

07-31-2016, 08:51 PM	#2
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,937	Re: Few pics of Blown 383 build congrats! How much do you think the local constabulary will harass you? My guess is a lot. But I'm guessing you could always outrun em.

07-31-2016, 10:24 PM	#4
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,707	Re: Few pics of Blown 383 build Wow! Dennis, that looks great. I can't wait to see it in person. Were are you going to put all those trophies? I knew you must be busy since I hadn't heard from you. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

08-01-2016, 01:35 AM	#5
trac209 Registered User Join Date: Dec 2011 Location: winnipeg Posts: 1,107	Re: Few pics of Blown 383 build Looks awesome

08-01-2016, 02:41 PM	#6
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: Few pics of Blown 383 build How low a compression are you running in that 383 to be able to run that blower?

08-02-2016, 09:09 PM	#10
ck5566 Account Suspended Join Date: Apr 2016 Location: Rancho Mirage, Ca. Posts: 875	Re: Few pics of Blown 383 build I love your Bumper Guards. No one would think of getting close to your truck. It looks Mid Evil. And that's no joke!

08-02-2016, 09:40 PM	#11
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Few pics of Blown 383 build Awesome truck!!! __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

08-07-2016, 06:17 AM	#15
adricar1 Registered User Join Date: Sep 2013 Location: United kingdom Posts: 127	Re: Few pics of Blown 383 build i have a similar set up i am building here in the united kingdom. did you the v8 mounts of the straight 6 mounts? how much clearence do you have to the radiator? a photo would be great, and if possible a photp of the way you have piped up the fuel system to the carbs best wishes adrian. __________________ GMC K1500 1971 350 cu in th350 4wd Bondo Bob c 10 1971 stepside th 350 c10 1970 350 cu in manual air con stepside.

08-07-2016, 01:44 PM	#16
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: Few pics of Blown 383 build That's sweet truck hardway. Glad too see those little filters in there so you don't suck up pterodactyl or small planes and chew them up and fart them out the exhaust. There is a fella I know down below reading here that has a 69 swb set up the same way he built a sweet alum. bed cover for his too cover up the narrowed rear end and cut bed floor. He incorporated a nascar style spoiler built into the bed cover I loved the way he did that. Last I saw it the truck was all blacked out but I think he got it painted by now. __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.