IA 1977 Silverado (all or part) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

63frankintruck · 11-12-2016, 09:17 PM

Listing for my dad. He has a 1977 Silverado parts truck running condition, with good title.
Several good parts to be had.
Front wheels have been sold, but working on getting rollers. (this is a parts truck) Truck had water in it from a flood, but dad drained and changed out all fluids, and is currently running and will move.

Short List of Parts to be had:

Windshield Visor
Doors are solid
Front Suspension/Disk Brakes
Front Clip (some rust lower corners as usual)
Motor SBC 350 w/Holley Carb (running)
Auto Trans
Rear Differential
Tilt with Cruise
Interior parts etc.
Good Clean Iowa Title

$950.
Located in North East Iowa, 50659

Mom's cell- 641-220-2490

or Call- Don (dad) @ 641-229-5812

*gmachinz* · 11-12-2016, 11:56 PM

How high did the water get inside of it?

63frankintruck · 11-13-2016, 07:26 AM

Quote:

Originally Posted by gmachinz

How high did the water get inside of it?

They live by a creek, water came up in backyard and rose high enough to get in engine.
Posted via Mobile Device

63frankintruck · 11-13-2016, 07:32 AM

Quote:

Originally Posted by 63frankintruck

They live by a creek, water came up in backyard and rose high enough to get in engine. I will ask today and post answer later . You could call also if you want. Truck is in Iowa and I'm in Texas.
Posted via Mobile Device

Posted via Mobile Device

**old Rusty C10** · 11-13-2016, 10:32 AM

door panels and is it a manual trans if so im looking at tilt column im at 07731 in nj

*gmachinz* · 11-13-2016, 10:44 AM

Quote:

Originally Posted by 63frankintruck

Posted via Mobile Device

Ok-I called and left a message last night about looking at it today possibly.

63frankintruck · 11-13-2016, 01:55 PM

Quote:

Originally Posted by gmachinz

Ok-I called and left a message last night about looking at it today possibly.

You might try calling my moms phone, Dad is not the best with cell phones.
I just informed mom, about your message.
I will add her number to original posting. But here it is. (her name is Delores 641-220-2490)
Thanks!

RodsGreen10 · 11-13-2016, 05:58 PM

I want the clip that holds the wiring harness to the fire wall. That small clip up by the cowl. How much for that?

HunterRotten · 11-16-2016, 10:03 AM

What kind of shape are the dash bezels in? I'm interested in the driver and passenger side woodgrain on the dash. Thanks!

**1774btcrew** · 11-16-2016, 04:58 PM

Quote:

Originally Posted by old Rusty C10

door panels and is it a manual trans if so im looking at tilt column im at 07731 in nj

Bob, saw a good deal(I think) on a manual trans tilt. Hit me up if you want info. Don't want to post it here.

63frankintruck · 11-17-2016, 11:12 AM

They would like to sell all at once (whole truck). If it doesn't sell will consider parting. I think Gmachinz talking with dad at this point
Posted via Mobile Device

74CustomK20 · 11-17-2016, 11:21 AM

If you will part how much for the door panel trim?

63frankintruck · 11-17-2016, 07:30 PM

Quote:

Originally Posted by 74CustomK20

If you will part how much for the door panel trim?

Will wait to see if whole truck sells. Will let you know if and when the truck turns into a part out.
I'm in texas trying to sell this truck on the forum for my Dad in Iowa.
Thanks for your patience.

63frankintruck · 11-17-2016, 07:31 PM

PM sent to gmachinz

77shorty · 11-17-2016, 09:53 PM

Im interested in an interior window crank handle......thanks. Mark

**bhc41051** · 11-17-2016, 10:14 PM

Good lord...........

favor · 11-23-2016, 10:20 PM

dash woodgrain gauge bezel still available ?

*gmachinz* · 11-23-2016, 10:32 PM

Quote:

Originally Posted by 63frankintruck

PM sent to gmachinz

I just wanted to reply here that I won't be able to make a play for the truck-I just can't get away from work enough to make the trip up to check it out-it really doesn't sound like a bad truck!

11-12-2016, 09:17 PM	#1
63frankintruck Registered User Join Date: Oct 2015 Location: Keller, tx Posts: 426	1977 Silverado (all or part) Listing for my dad. He has a 1977 Silverado parts truck running condition, with good title. Several good parts to be had. Front wheels have been sold, but working on getting rollers. (this is a parts truck) Truck had water in it from a flood, but dad drained and changed out all fluids, and is currently running and will move. Short List of Parts to be had: Windshield Visor Doors are solid Front Suspension/Disk Brakes Front Clip (some rust lower corners as usual) Motor SBC 350 w/Holley Carb (running) Auto Trans Rear Differential Tilt with Cruise Interior parts etc. Good Clean Iowa Title $950. Located in North East Iowa, 50659 Mom's cell- 641-220-2490 or Call- Don (dad) @ 641-229-5812 Attached Images Last edited by 63frankintruck; 11-13-2016 at 01:58 PM. Reason: add phone number

11-12-2016, 11:56 PM	#2
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 1977 Silverado (all or part) How high did the water get inside of it?

11-13-2016, 10:32 AM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,275	Re: 1977 Silverado (all or part) door panels and is it a manual trans if so im looking at tilt column im at 07731 in nj __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-13-2016, 05:58 PM	#8
RodsGreen10 Registered User Join Date: Jun 2015 Location: Richmond,KY and Knoxville,TN Posts: 1,584	Re: 1977 Silverado (all or part) I want the clip that holds the wiring harness to the fire wall. That small clip up by the cowl. How much for that?

11-16-2016, 10:03 AM	#9
HunterRotten Registered User Join Date: Oct 2016 Location: Kentucky Posts: 385	Re: 1977 Silverado (all or part) What kind of shape are the dash bezels in? I'm interested in the driver and passenger side woodgrain on the dash. Thanks! __________________ 1978 Hawaiian Blue GMC 454/Tremec TKO 500 BUILD THREAD

11-17-2016, 11:12 AM	#11
63frankintruck Registered User Join Date: Oct 2015 Location: Keller, tx Posts: 426	They would like to sell all at once (whole truck). If it doesn't sell will consider parting. I think Gmachinz talking with dad at this point Posted via Mobile Device

11-17-2016, 11:21 AM	#12
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: 1977 Silverado (all or part) If you will part how much for the door panel trim? __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

11-17-2016, 07:31 PM	#14
63frankintruck Registered User Join Date: Oct 2015 Location: Keller, tx Posts: 426	Re: 1977 Silverado (all or part) PM sent to gmachinz

11-17-2016, 09:53 PM	#15
77shorty Registered User Join Date: Apr 2015 Location: Portland, Or Posts: 100	Re: 1977 Silverado (all or part) Im interested in an interior window crank handle......thanks. Mark

11-17-2016, 10:14 PM	#16
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 787	Re: 1977 Silverado (all or part) Good lord...........

11-23-2016, 10:20 PM	#17
favor Registered User Join Date: Sep 2015 Location: cape coral,FL Posts: 80	Re: 1977 Silverado (all or part) dash woodgrain gauge bezel still available ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.