FS: 69 C10 swb project truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 11-21-2003, 11:17 AM

Time to sell one of my projects, u know the drill, no time or money at the moment. This is a great start for a project.

This is a project truck which has been disassembled for restoration. Most of the body work has been completed including the following:

- Bed redone and painted tangerine orange
- New tailgate installed and painted
- New rear roll pan installed and painted
- Front fenders redone
- Cab corners replaced and painted
- Rocker panels replaced (drivers side needs finishing)
- Gas tank filler neck hole filled and painted
- Cab needs some firewall and floor rust repair
- No window or drip rail rot
- Right door redone (speaker hole unfortunately),
left needs finishing

The truck has been converted to 5 lugs all around with front disc brakes and a 3:73 rear (all from a 72 donor truck). It also has power steering and power brakes. Also available are a set of rally wheels with center caps and trim rings.

$900 or $800 less tailgate Any questions please let me know.

Thanks.

Burnsman · 11-21-2003, 11:43 AM

Please send pics to bburns@vikingtg.com Thanks! Interested. Any motor/trans? What is it set-up for? Do you have a phone # I can reach you? I'd like to ask some questions. Thanks.

**ScottH** · 11-22-2003, 12:37 AM

No motor or trans, is setup for manual, and has small block engine mounts from the 72 donor. I'll work on pics this weekend.

Thanks.

**ScottH** · 11-25-2003, 12:44 AM

Pics available, can email if anyone interested. Not having any luck posting them.

Any questions please let me know.

Thanks.

Charlie Coleman · 11-25-2003, 12:50 PM

scotth.....email the pics to me and I will post for you.

charlie.coleman@janus.com

good luck with the sale

WILLNIK · 11-25-2003, 10:09 PM

Please send pics to tmc04@yahoo.com with phone #. Thanks, Terry

**ScottH** · 11-26-2003, 01:50 AM

Pics sent to all interested......Charlie u too, thanks again for any assistance.

Scott

Charlie Coleman · 11-26-2003, 01:41 PM

posting for scotth

Charlie Coleman · 11-26-2003, 01:42 PM

#2

Charlie Coleman · 11-26-2003, 01:43 PM

#3

Charlie Coleman · 11-26-2003, 01:44 PM

4

Charlie Coleman · 11-26-2003, 01:46 PM

5

Charlie Coleman · 11-26-2003, 01:47 PM

6

Charlie Coleman · 11-26-2003, 01:48 PM

7

Charlie Coleman · 11-26-2003, 01:49 PM

last one

**ScottH** · 12-01-2003, 12:02 AM

Heading for ebay soon.....would also consider trade for good bbc

Hogzilla · 12-01-2003, 01:11 PM

PM sent....

Hogzilla · 12-01-2003, 04:34 PM

Anyone know how to get this thing to Iowa without costing an arm and a leg.??

67-72JUNKY · 12-01-2003, 11:42 PM

SEND PM WITH PHONE # I WOULD LIKE TO BUY TRUCK I LIVE IN MARYLAND . CAN PICK UP ASAP IF OK ......THANKS DAVID

**ScottH** · 12-02-2003, 01:45 AM

Hogzilla, found a guy on ebay going from NJ to Ill. soon, sent him an email to see if he would go to Iowa. I'll let you know when I hear back from him.

67-72Junky, sent you a pm with phone numbers you can reach me.

Scott

**ScottH** · 12-02-2003, 11:32 PM

Willing to sell truck for $1000 less rally wheels (or tailgate, your choice).

Thanks.

**diggy** · 12-04-2003, 03:24 AM

can something like that be shipped? how much would it cost?

**old Rusty C10** · 12-04-2003, 02:17 PM

i m always heading south and would consider hauling to maryland if you would be interested Iowa is a possibility too although it does get expensive. It would cost you $120 or so for the trailer and then id have to figure in my tolls and gas and my fee if scott is not in a hurry im suppoused to head to NC in the near future for another member and it could be done then too

**ScottH** · 12-08-2003, 10:09 PM

Last time before it goes ebay way.......any questions please let me know.

Thanks.

**ScottH** · 12-10-2003, 11:00 AM

ttt

11-21-2003, 11:17 AM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	FS: 69 C10 swb project truck - lowered price! Time to sell one of my projects, u know the drill, no time or money at the moment. This is a great start for a project. This is a project truck which has been disassembled for restoration. Most of the body work has been completed including the following: - Bed redone and painted tangerine orange - New tailgate installed and painted - New rear roll pan installed and painted - Front fenders redone - Cab corners replaced and painted - Rocker panels replaced (drivers side needs finishing) - Gas tank filler neck hole filled and painted - Cab needs some firewall and floor rust repair - No window or drip rail rot - Right door redone (speaker hole unfortunately), left needs finishing The truck has been converted to 5 lugs all around with front disc brakes and a 3:73 rear (all from a 72 donor truck). It also has power steering and power brakes. Also available are a set of rally wheels with center caps and trim rings. $900 or $800 less tailgate Any questions please let me know. Thanks. Last edited by ScottH; 12-15-2003 at 03:08 PM.

11-25-2003, 10:09 PM	#6
WILLNIK Senior Member Join Date: Jul 2000 Location: Newark, NY Posts: 626	Please send pics to tmc04@yahoo.com with phone #. Thanks, Terry __________________ 50 miles west of Syracuse, NY '94 Silverado swb '70 Chevelle '65 Corvette roadster '11 Tahoe (wifes ride)

11-26-2003, 01:41 PM	#8
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	posting for scotth Attached Images

11-26-2003, 01:42 PM	#9
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	#2 Attached Images

11-26-2003, 01:43 PM	#10
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	#3 Attached Images

11-21-2003, 11:43 AM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	truck Please send pics to bburns@vikingtg.com Thanks! Interested. Any motor/trans? What is it set-up for? Do you have a phone # I can reach you? I'd like to ask some questions. Thanks. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

11-22-2003, 12:37 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	No motor or trans, is setup for manual, and has small block engine mounts from the 72 donor. I'll work on pics this weekend. Thanks.

11-25-2003, 12:44 AM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Pics available, can email if anyone interested. Not having any luck posting them. Any questions please let me know. Thanks.

11-25-2003, 12:50 PM	#5
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	scotth.....email the pics to me and I will post for you. charlie.coleman@janus.com good luck with the sale

11-26-2003, 01:50 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Pics sent to all interested......Charlie u too, thanks again for any assistance. Scott

11-26-2003, 01:44 PM	#11
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	4 Attached Images

11-26-2003, 01:46 PM	#12
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	5 Attached Images

11-26-2003, 01:47 PM	#13
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	6 Attached Images

11-26-2003, 01:48 PM	#14
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	7 Attached Images

11-26-2003, 01:49 PM	#15
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	last one Attached Images



Register or Log In To remove these advertisements.

12-01-2003, 12:02 AM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Heading for ebay soon.....would also consider trade for good bbc

12-01-2003, 01:11 PM	#17
Hogzilla Registered User Join Date: Jun 2003 Location: Atkins, Iowa Posts: 60	PM sent.... __________________ WTB -- SWB in or near Iowa. Former owner of a 1969 SWB Step and a 1971 SWB Fleet. Looking for my next project.

12-01-2003, 04:34 PM	#18
Hogzilla Registered User Join Date: Jun 2003 Location: Atkins, Iowa Posts: 60	Anyone know how to get this thing to Iowa without costing an arm and a leg.?? __________________ WTB -- SWB in or near Iowa. Former owner of a 1969 SWB Step and a 1971 SWB Fleet. Looking for my next project.

12-01-2003, 11:42 PM	#19
67-72JUNKY Registered User Join Date: Nov 2003 Location: SALISBURY MARYLAND Posts: 61	SEND PM WITH PHONE # I WOULD LIKE TO BUY TRUCK I LIVE IN MARYLAND . CAN PICK UP ASAP IF OK ......THANKS DAVID

12-02-2003, 01:45 AM	#20
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Hogzilla, found a guy on ebay going from NJ to Ill. soon, sent him an email to see if he would go to Iowa. I'll let you know when I hear back from him. 67-72Junky, sent you a pm with phone numbers you can reach me. Scott

12-02-2003, 11:32 PM	#21
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Willing to sell truck for $1000 less rally wheels (or tailgate, your choice). Thanks.

12-04-2003, 03:24 AM	#22
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	can something like that be shipped? how much would it cost?

12-04-2003, 02:17 PM	#23
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,276	i m always heading south and would consider hauling to maryland if you would be interested Iowa is a possibility too although it does get expensive. It would cost you $120 or so for the trailer and then id have to figure in my tolls and gas and my fee if scott is not in a hurry im suppoused to head to NC in the near future for another member and it could be done then too __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-08-2003, 10:09 PM	#24
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Last time before it goes ebay way.......any questions please let me know. Thanks.

12-10-2003, 11:00 AM	#25
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	ttt

Register or Log In To remove these advertisements.