71 longhorn 4x4 3/4ton - round 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 12-04-2003, 12:46 PM

My wife doesn't like my big "flower pot" in the yard. She wants it gone. $900. No motor. Rebuilt TH400, NP203 (I think), sitting on an 83 frame/suspension (I guess they were 6" longer on the wheelbase, which is why it worked with the longhorn). Needs rockers, bed wheellips getting bubbles. Has newer style truck seat, blazer gas tank (factory hole welded). It needs a new windshield, but there is a good one that goes with it. Has rear slider too. You can call 814-333-2704. Thanks. Brian

Burnsman · 12-04-2003, 12:46 PM

truck

Destructo · 12-04-2003, 01:40 PM

I want that truck so bad! But I think my balls would be chopped off for bringing another one home. hehe

Burnsman · 12-04-2003, 01:46 PM

Mine were..............

**old Rusty C10** · 12-04-2003, 02:00 PM

i assume you have the hood for it too?? and also would a 80 something 305 bolt into it ( carbuerated) without major mods?im working on asking the old lady lol i kinda have this desire to keep my balls

Burnsman · 12-04-2003, 02:17 PM

Yes, the hood is in the bed, as are the tranny cooler, radiator, extra front windshield, stock rear glass, and the original gas tank. He (the previous owner) had the original 350 in it that went with the frame (83). He pulled it when the motor went, had plans for a big block (he actually had it just sitting in there) and then pulled the motor the day before I got there. The fuel pump, starter and power steering pump are still attached to the truck from the small block.

00droptopSS · 12-04-2003, 03:26 PM

I wish it was closer.

VTKidder · 12-04-2003, 04:15 PM

I'm very suprised that thing hasn't moved yet. Lots of potential!

Burnsman · 12-04-2003, 04:17 PM

The tires are good too! Reese hitch, dual exhaust. Good project. I just have too many.

**old Rusty C10** · 12-04-2003, 04:41 PM

im gonna work ont he old lady my 305 would not be a direct bolt on then right?

Burnsman · 12-04-2003, 05:00 PM

Yes, yours would be a direct bolt-in. You would need headers. He didn't change any of the motor mounts or anything. He just had the big block sitting in there.

**ScottH** · 12-05-2003, 12:35 AM

Brian, sent you a pm.

doc70sub · 12-05-2003, 12:59 AM

I still want it bad, but 586 miles tell me differently!!

Doc

Burnsman · 12-06-2003, 11:01 AM

Truck is tentatively sold. Thanks.

12-04-2003, 12:46 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	71 longhorn 4x4 3/4ton - round 2 My wife doesn't like my big "flower pot" in the yard. She wants it gone. $900. No motor. Rebuilt TH400, NP203 (I think), sitting on an 83 frame/suspension (I guess they were 6" longer on the wheelbase, which is why it worked with the longhorn). Needs rockers, bed wheellips getting bubbles. Has newer style truck seat, blazer gas tank (factory hole welded). It needs a new windshield, but there is a good one that goes with it. Has rear slider too. You can call 814-333-2704. Thanks. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

12-04-2003, 12:46 PM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	truck truck Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

12-04-2003, 01:46 PM	#4
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	truck Mine were.............. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

12-04-2003, 02:00 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,275	i assume you have the hood for it too?? and also would a 80 something 305 bolt into it ( carbuerated) without major mods?im working on asking the old lady lol i kinda have this desire to keep my balls __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-04-2003, 02:17 PM	#6
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Parts Yes, the hood is in the bed, as are the tranny cooler, radiator, extra front windshield, stock rear glass, and the original gas tank. He (the previous owner) had the original 350 in it that went with the frame (83). He pulled it when the motor went, had plans for a big block (he actually had it just sitting in there) and then pulled the motor the day before I got there. The fuel pump, starter and power steering pump are still attached to the truck from the small block. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

12-04-2003, 01:40 PM	#3
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	I want that truck so bad! But I think my balls would be chopped off for bringing another one home. hehe

12-04-2003, 03:26 PM	#7
00droptopSS 2.5/4 on 20's Join Date: Aug 2001 Location: Shreveport, LA Posts: 392	I wish it was closer. __________________ 62 C/10 SWB. Currently in ground up resto. Big back window cab, V8, auto. My wife's grandfather's truck. 1965 Mustang Vert - Shelby Clone 2005 Dodge SRT-10 My Old 72 SWB

12-04-2003, 04:15 PM	#8
VTKidder Registered User Join Date: May 2003 Location: Vermont Posts: 996	I'm very suprised that thing hasn't moved yet. Lots of potential!

12-04-2003, 04:17 PM	#9
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	truck The tires are good too! Reese hitch, dual exhaust. Good project. I just have too many. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

12-04-2003, 04:41 PM	#10
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,275	im gonna work ont he old lady my 305 would not be a direct bolt on then right? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-04-2003, 05:00 PM	#11
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	motor Yes, yours would be a direct bolt-in. You would need headers. He didn't change any of the motor mounts or anything. He just had the big block sitting in there. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

12-05-2003, 12:35 AM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Brian, sent you a pm.

12-05-2003, 12:59 AM	#13
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	I still want it bad, but 586 miles tell me differently!! Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

12-06-2003, 11:01 AM	#14
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	truck Truck is tentatively sold. Thanks. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.