Stepside Bed Parts For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1971Stepside** · 12-09-2003, 11:58 AM

I have four shortbed bedsides for sale. No rust, top rails are straight, dings, etc. $75 each no shipping

I have a front panel for step side. Has on pretty good size dent in the front/top. Could be fixed pretty easily. $25 no shipping

Passenger side fender. No rust has small dent on the bottom side of the fender where it turns under by the tire. Easy fix. $75 no ship

Passenger step in excellent shape. $25

Drivers fender no cut out. Fender is tweaked and has some putty in the front of it from a dent, but could be fixed. No rust. Fender was just not clean enough for what I am trying to build. $60 no ship.

Other stuff:

3/4 ton brake booster and master cylinder. $35 no ship

69 -72 RH front fender straight an no visible rust. $45 no ship

All prices are negotiable. Please no PM's. If you can't post here then send e-mail to shannon_cape@yahoo.com

*dtlilly* · 12-09-2003, 02:52 PM

Passenger side step in good shape.

Please send a pic of this to drum_prayer@yahoo.com, or post a pic on here, thanks, Don.

I assume it will be shipped since you don't denote otherwise, I would like to have it shipped to 38108, thanks, Don

**1971Stepside** · 12-09-2003, 05:36 PM

dtilly, I have one other guy in front of you. I'll post pics of it soon.

*dtlilly* · 12-09-2003, 09:54 PM

Thanks, let me know, Don.

67TruckNut · 12-09-2003, 11:06 PM

Do you still have the bedsides? I may be interested. Can you send me pics of them via email? send to: rothert@dtnspeed.net
I am just north of you about 200 miles in Auburn, Illinois which is just south of Springfield. Let me know if you can't get any pics.
Thanks, Damon

*dtlilly* · 12-09-2003, 11:11 PM

Damon, I'd like to say welcome to the board, but you've been registered since 2000, but this is your first post

67TruckNut · 12-09-2003, 11:40 PM

thanks, I just normally PM and haven't had much time to even do that.

**breeh** · 12-09-2003, 11:41 PM

Damon has just been waiting for the right part

67TruckNut · 12-10-2003, 12:04 AM

that's how I've gotten the last couple good ones. They are gettin' fewer and farther between tho aren't they?

**1971Stepside** · 12-10-2003, 12:45 PM

Truck Nut. I will take pictures tonight and e-mail them to you. None of the bedsides have sold yet.

Smooth68 · 12-10-2003, 03:06 PM

Here's some pics of the bedsides - hope Shannon doesn't mind me posting these

Smooth68 · 12-10-2003, 03:06 PM

2

Smooth68 · 12-10-2003, 03:07 PM

3

Smooth68 · 12-10-2003, 03:10 PM

4

**1971Stepside** · 12-10-2003, 04:45 PM

Thanks Smooth, I appreciate you taking the time to do that.

**1971Stepside** · 12-11-2003, 02:31 PM

ttt

*dtlilly* · 12-11-2003, 02:33 PM

Is that passenger side step gone yet?

67TruckNut · 12-11-2003, 05:57 PM

thanks for the pics guys! I am going to be down that way on Saturday. I will have to see what time we have. Will you be around? Can you email me your phone number or post if you don't mind so I can get a hold of you in case we can swing that way? Thanks, Damon
PS, is the bed front the one in the pic?

ZOOMY · 12-12-2003, 02:25 AM

I'm interested in the drivers step fender & the pass. RH front fender. I'm going to be at Randy's (teeitup) in the next few weeks.......Zoomy

**1971Stepside** · 12-12-2003, 05:53 PM

OK, guys. I am so sorry I have been slow to respond. Wifes birthday yesterday and all the other good Christmas things going on.

I owe 7d14xfun feedback on the step. I think he will take it, I just need to get him a pic and shipping price.

I will be around Saturday morning only (until 12) I can probably get Lost Wages to show you the bedsides if you need to come later. As for the bed front it is not the one pictured, but it is red like those two bedsides pictured.

Let me know. I will email you my phone number.

Zoomy. Let me know. I am in KC for the Chiefs games. The next game is the 28th after this weekend....oh, and in January for a playoff game!!

Please bear with me guys. I'm not blowing any of you off, just turned out to be dang busy all of the sudden.

12-09-2003, 11:58 AM	#1
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Stepside Bed Parts For Sale I have four shortbed bedsides for sale. No rust, top rails are straight, dings, etc. $75 each no shipping I have a front panel for step side. Has on pretty good size dent in the front/top. Could be fixed pretty easily. $25 no shipping Passenger side fender. No rust has small dent on the bottom side of the fender where it turns under by the tire. Easy fix. $75 no ship Passenger step in excellent shape. $25 Drivers fender no cut out. Fender is tweaked and has some putty in the front of it from a dent, but could be fixed. No rust. Fender was just not clean enough for what I am trying to build. $60 no ship. Other stuff: 3/4 ton brake booster and master cylinder. $35 no ship 69 -72 RH front fender straight an no visible rust. $45 no ship All prices are negotiable. Please no PM's. If you can't post here then send e-mail to shannon_cape@yahoo.com __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

12-09-2003, 05:36 PM	#3
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	dtilly, I have one other guy in front of you. I'll post pics of it soon. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

12-09-2003, 11:06 PM	#5
67TruckNut Registered User Join Date: May 2000 Location: Auburn, Illinois Posts: 9	bedsides Do you still have the bedsides? I may be interested. Can you send me pics of them via email? send to: rothert@dtnspeed.net I am just north of you about 200 miles in Auburn, Illinois which is just south of Springfield. Let me know if you can't get any pics. Thanks, Damon

12-09-2003, 11:41 PM	#8
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Damon has just been waiting for the right part __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

12-10-2003, 12:45 PM	#10
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Truck Nut. I will take pictures tonight and e-mail them to you. None of the bedsides have sold yet. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

12-09-2003, 02:52 PM	#2
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Passenger side step in good shape. Please send a pic of this to drum_prayer@yahoo.com, or post a pic on here, thanks, Don. I assume it will be shipped since you don't denote otherwise, I would like to have it shipped to 38108, thanks, Don

12-09-2003, 09:54 PM	#4
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Thanks, let me know, Don.

12-09-2003, 11:11 PM	#6
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Damon, I'd like to say welcome to the board, but you've been registered since 2000, but this is your first post

12-09-2003, 11:40 PM	#7
67TruckNut Registered User Join Date: May 2000 Location: Auburn, Illinois Posts: 9	thanks, I just normally PM and haven't had much time to even do that.

12-10-2003, 12:04 AM	#9
67TruckNut Registered User Join Date: May 2000 Location: Auburn, Illinois Posts: 9	that's how I've gotten the last couple good ones. They are gettin' fewer and farther between tho aren't they?

12-10-2003, 03:06 PM	#11
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	Here's some pics of the bedsides - hope Shannon doesn't mind me posting these Attached Images __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

12-10-2003, 03:06 PM	#12
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	2 Attached Images __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

12-10-2003, 03:07 PM	#13
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	3 Attached Images __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

12-10-2003, 03:10 PM	#14
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	4 Attached Images __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

12-10-2003, 04:45 PM	#15
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Thanks Smooth, I appreciate you taking the time to do that. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."



Register or Log In To remove these advertisements.

12-11-2003, 02:31 PM	#16
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	ttt __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

12-11-2003, 02:33 PM	#17
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Is that passenger side step gone yet?

12-11-2003, 05:57 PM	#18
67TruckNut Registered User Join Date: May 2000 Location: Auburn, Illinois Posts: 9	thanks for the pics guys! I am going to be down that way on Saturday. I will have to see what time we have. Will you be around? Can you email me your phone number or post if you don't mind so I can get a hold of you in case we can swing that way? Thanks, Damon PS, is the bed front the one in the pic?

12-12-2003, 02:25 AM	#19
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	fenders I'm interested in the drivers step fender & the pass. RH front fender. I'm going to be at Randy's (teeitup) in the next few weeks.......Zoomy

12-12-2003, 05:53 PM	#20
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	OK, guys. I am so sorry I have been slow to respond. Wifes birthday yesterday and all the other good Christmas things going on. I owe 7d14xfun feedback on the step. I think he will take it, I just need to get him a pic and shipping price. I will be around Saturday morning only (until 12) I can probably get Lost Wages to show you the bedsides if you need to come later. As for the bed front it is not the one pictured, but it is red like those two bedsides pictured. Let me know. I will email you my phone number. Zoomy. Let me know. I am in KC for the Chiefs games. The next game is the 28th after this weekend....oh, and in January for a playoff game!! Please bear with me guys. I'm not blowing any of you off, just turned out to be dang busy all of the sudden. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

Register or Log In To remove these advertisements.