velocity stack /carter 600/ edelbrock victor jr air gap 4 sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*cranknut67* · 01-19-2004, 03:30 AM

I have a few USED items to get rid of - wanted you guys to have a crack at them before they went to e-bay.

K&N velocity stack 10-12 incher (aluminum) with K&N filter 60$

Edelbrock Victor Jr. Air Gap intake (SBC) -SOLD

Billett Lokar ( I think?) adj. gas pedal w/rubber inserts + throttle cable (NEW) 95$

Carter 600 CFM carb -SOLD

Chrome water pump single pulley 10$

Aluminum crank pulley 45$ (Never used)

3 Spoke grant steering wheel ( basic model )

comp 268 H cam & lifters ( w/30 miles on it) 75$

67-72 red tail light covers 10$

67 guage Bezel (black) 10$

67 gauge cluster ( MPH / Gas /oil /temp/ ) 20$

Erson TQ40 cam only SBC 35$ - break-in time only 25$

Erson old school round 14" air cleaner ( chrome ) 10$

MSD timing controller 14 degrees adj. 50$

All items are in good condition. - Items do not include shipping.

Pont · 01-19-2004, 04:35 AM

is the 67 guage cluster complete? with bezel? what condition? any pics? where are you located so I can get an idea of what shipping will be?

*cranknut67* · 01-19-2004, 12:57 PM

the guage cluster is complete, and is in ok condition ( for 40 years old ) it doesn't come with the bezel or the plastic cover that goes between (unless I can find it - then I'll throw it in ). - shipping is from 85015 zip

**JDL** · 01-19-2004, 09:17 PM

PM sent on Edelbrock Victor Jr. Air Gap intake (SBC) 75$

superchevy · 01-19-2004, 09:54 PM

PM sent on the carb.
SC

*cranknut67* · 01-19-2004, 10:05 PM

replied to PM's

*rage'nrat638* · 01-19-2004, 10:21 PM

how many grooves on that crank pulley????
small block???
thanks mark

dinnut · 01-20-2004, 01:52 AM

interested in the 268 cam and lifters! ill pm you

*cranknut67* · 01-20-2004, 03:36 AM

two grooves on that crank pulley - bought the damn thing and it wont work with the blower pulley that goes down in there - there's a 1-1/2 " round deal on the end of the blower pulley that goes through the crank pulley and it doesn't fit just by a hair - and I lost the receipt for the it. - so it's brand new - gathering dust.

*cranknut67* · 01-21-2004, 04:05 AM

ttt

01-19-2004, 03:30 AM	#1
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	velocity stack /carter 600/ edelbrock victor jr air gap 4 sale I have a few USED items to get rid of - wanted you guys to have a crack at them before they went to e-bay. K&N velocity stack 10-12 incher (aluminum) with K&N filter 60$ Edelbrock Victor Jr. Air Gap intake (SBC) -SOLD Billett Lokar ( I think?) adj. gas pedal w/rubber inserts + throttle cable (NEW) 95$ Carter 600 CFM carb -SOLD Chrome water pump single pulley 10$ Aluminum crank pulley 45$ (Never used) 3 Spoke grant steering wheel ( basic model ) comp 268 H cam & lifters ( w/30 miles on it) 75$ 67-72 red tail light covers 10$ 67 guage Bezel (black) 10$ 67 gauge cluster ( MPH / Gas /oil /temp/ ) 20$ Erson TQ40 cam only SBC 35$ - break-in time only 25$ Erson old school round 14" air cleaner ( chrome ) 10$ MSD timing controller 14 degrees adj. 50$ All items are in good condition. - Items do not include shipping. Last edited by cranknut67; 01-20-2004 at 03:23 PM.

01-19-2004, 04:35 AM	#2
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	is the 67 guage cluster complete? with bezel? what condition? any pics? where are you located so I can get an idea of what shipping will be? __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

01-19-2004, 09:17 PM	#4
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	PM sent on Edelbrock Victor Jr. Air Gap intake (SBC) 75$ __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

01-20-2004, 01:52 AM	#8
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	interested in the 268 cam and lifters! ill pm you __________________ 70 longbed 496/th400/Ford 9"

01-19-2004, 12:57 PM	#3
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	the guage cluster is complete, and is in ok condition ( for 40 years old ) it doesn't come with the bezel or the plastic cover that goes between (unless I can find it - then I'll throw it in ). - shipping is from 85015 zip

01-19-2004, 09:54 PM	#5
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	PM sent on the carb. SC

01-19-2004, 10:05 PM	#6
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	replied to PM's

01-19-2004, 10:21 PM	#7
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	how many grooves on that crank pulley???? small block??? thanks mark

01-20-2004, 03:36 AM	#9
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	two grooves on that crank pulley - bought the damn thing and it wont work with the blower pulley that goes down in there - there's a 1-1/2 " round deal on the end of the blower pulley that goes through the crank pulley and it doesn't fit just by a hair - and I lost the receipt for the it. - so it's brand new - gathering dust.

01-21-2004, 04:05 AM	#10
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.