Am i asking too much? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'70_402** · 03-03-2004, 03:18 PM

I would like to at least get $1,000 dollars out of this truck but i think that might be unrealistic...just need some input on what you guys think it would be worth?

**'70_402** · 03-03-2004, 03:19 PM

#2

**'70_402** · 03-03-2004, 03:20 PM

#3

**'70_402** · 03-03-2004, 03:20 PM

#4

**'70_402** · 03-03-2004, 03:21 PM

#5

**'70_402** · 03-03-2004, 03:22 PM

#6

70ChevyLongbed · 03-03-2004, 03:37 PM

What motor? trans? How does it run?

**'70_402** · 03-03-2004, 03:41 PM

283 with a powerglide, needs some work to be drivable..(no brakes)

dubie · 03-03-2004, 03:46 PM

I would say that $1000 might be astretch, depending on your location and the market. I would say more around $600 if it needs work to get it running. But that's just what it would go for in my area.

what are the cab corners, rockers and cab supports like?

**Yukon Jack** · 03-03-2004, 03:57 PM

To most people that would be a rough work truck that would be in the $600 range, to someone that enjoys these trucks and likes working on them, it might be worth a bit more.

sider68 · 03-03-2004, 04:10 PM

Clean it up and shoot the entire truck with primer and you should get what you are asking

*67Fleetsidedream* · 03-03-2004, 04:36 PM

It has some rusty spots on it. What does the rocker,kick panels look like? Bottom of the doors? Cab corners? It may be worth less than $600 if is REALLY bad with rust.

71402BB · 03-03-2004, 05:16 PM

I would have to agree, I tyhink\ it's worth about 600 the way it sits. bUT I think that if you where to spend a little time and money on it likr sanding it down and priming the whole truck, and making it driveable and fairly reliable then you could get 1,000 for it. But hell by the time you get done doing that you will probably like it by then and won't be able to let it go! LOL

**'70_402** · 03-03-2004, 05:35 PM

Yea, i don't want to spend too much time on it or i might get attached

Bowtie67 · 03-03-2004, 05:45 PM

Quote:

Originally posted by dubie
I would say that $1000 might be astretch, depending on your location and the market. I would say more around $600 if it needs work to get it running. But that's just what it would go for in my area.

what are the cab corners, rockers and cab supports like?

Dube whats that in american dollars?

I'm thinking you'll be lucky to get $400, Not running, rusted up, no tail lights, etc, etc. JMO

Blue Beard · 03-03-2004, 10:11 PM

The I's have it.............$400-600 range....

CG · 03-03-2004, 10:16 PM

i just paid 500 bucks for good running 69 longbox that just needed a carb tune. 307 auto, some dents and dings and the usuall rust

Hutch · 03-03-2004, 10:28 PM

70'_402
Are you in Arlington Texas?
Hey it does have the optional panoramic rear window option and V/8.
What does the glovebox option sheet have on it?

**'70_402** · 03-04-2004, 01:11 PM

Is the big back window the "panoramic"? if so it does have a big back window..it has the original 283 never even been pulled i will look at the glove box tonight and see what options it lists

dubie · 03-04-2004, 01:16 PM

Quote:

Originally posted by Bowtie67

Dube whats that in american dollars?

$1000 CDN is about $740 US so $600 would be around $440 US funds. Right in the ball park I would say.

And trust me 70 402 I don't mean any disrespect to you or your ride when I am giving this price. It's just what I have noticed about 67-72's in rougher shape bud

03-03-2004, 03:18 PM	#1
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	Am i asking too much? I would like to at least get $1,000 dollars out of this truck but i think that might be unrealistic...just need some input on what you guys think it would be worth? Attached Images __________________ https://www.ebay.com/itm/295742064443

03-03-2004, 03:37 PM	#7
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,266	What motor? trans? How does it run? __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

03-03-2004, 03:41 PM	#8
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	283 with a powerglide, needs some work to be drivable..(no brakes) __________________ https://www.ebay.com/itm/295742064443 Last edited by '70_402; 03-03-2004 at 03:49 PM.

03-03-2004, 03:46 PM	#9
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	I would say that $1000 might be astretch, depending on your location and the market. I would say more around $600 if it needs work to get it running. But that's just what it would go for in my area. what are the cab corners, rockers and cab supports like? __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

03-03-2004, 03:57 PM	#10
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	To most people that would be a rough work truck that would be in the $600 range, to someone that enjoys these trucks and likes working on them, it might be worth a bit more. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-03-2004, 03:19 PM	#2
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	#2 Attached Images __________________ https://www.ebay.com/itm/295742064443

03-03-2004, 03:20 PM	#3
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	#3 Attached Images __________________ https://www.ebay.com/itm/295742064443

03-03-2004, 03:20 PM	#4
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	#4 Attached Images __________________ https://www.ebay.com/itm/295742064443

03-03-2004, 03:21 PM	#5
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	#5 Attached Images __________________ https://www.ebay.com/itm/295742064443

03-03-2004, 03:22 PM	#6
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	#6 Attached Images __________________ https://www.ebay.com/itm/295742064443

03-03-2004, 04:10 PM	#11
sider68 Registered User Join Date: Mar 2002 Location: newmarket,ontario,canada Posts: 936	Clean it up and shoot the entire truck with primer and you should get what you are asking

03-03-2004, 04:36 PM	#12
67Fleetsidedream Wiseass secured himself a BAN Join Date: Nov 2000 Location: MOON!!! Posts: 2,282	It has some rusty spots on it. What does the rocker,kick panels look like? Bottom of the doors? Cab corners? It may be worth less than $600 if is REALLY bad with rust.

03-03-2004, 05:16 PM	#13
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	I would have to agree, I tyhink\ it's worth about 600 the way it sits. bUT I think that if you where to spend a little time and money on it likr sanding it down and priming the whole truck, and making it driveable and fairly reliable then you could get 1,000 for it. But hell by the time you get done doing that you will probably like it by then and won't be able to let it go! LOL __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

03-03-2004, 05:35 PM	#14
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	Yea, i don't want to spend too much time on it or i might get attached __________________ https://www.ebay.com/itm/295742064443

03-03-2004, 10:11 PM	#16
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	The I's have it.............$400-600 range.... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo



Register or Log In To remove these advertisements.

03-03-2004, 10:16 PM	#17
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,791	i just paid 500 bucks for good running 69 longbox that just needed a carb tune. 307 auto, some dents and dings and the usuall rust __________________ … … … … … … … … ... … … … … … … … … … … …

03-03-2004, 10:28 PM	#18
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,140	70'_402 Are you in Arlington Texas? Hey it does have the optional panoramic rear window option and V/8. What does the glovebox option sheet have on it? __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

03-04-2004, 01:11 PM	#19
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	Is the big back window the "panoramic"? if so it does have a big back window..it has the original 283 never even been pulled i will look at the glove box tonight and see what options it lists __________________ https://www.ebay.com/itm/295742064443

Register or Log In To remove these advertisements.