The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Heavy Haulers (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=239)
-   -   Gmc c60 1988 (https://67-72chevytrucks.com/vboard/showthread.php?t=586592)

DG Racing 06-28-2013 01:36 AM

Gmc c60 1988
 
How wide is the front track of a 1988 c60 ?

because if its the same as my 1959 C 80 i will be interested to change my frame on my truck for a 1988 c60 that i can purchase cheap


http://i1138.photobucket.com/albums/...once/002-4.jpg

DG Racing 06-29-2013 12:51 PM

Re: Gmc c60 1988
 
Or maybe how wide is a c-60 1975 ?

C10 - C90 Bill 06-29-2013 09:22 PM

Re: Gmc c60 1988
 
I'm not sure, but that seems like a real nice original heavy truck in real nice condition.

You have something pretty special there.

Bill

Flat 67 06-30-2013 03:53 PM

Re: Gmc c60 1988
 
Mr. DG

A 1988 GMC 7000 has a front track of 81 inch, center of tire to center of tire. I hope this helps. What are your plans?

Flat67

DG Racing 07-01-2013 01:56 PM

Re: Gmc c60 1988
 
Ok thank for the specs .Flat 67

but the 1988 is to wide for my 1959 because me I have 71 inch so that is 10 inch extra for the 1988 .


I wanted to buy a 1988 c60 and remove the body to install my 1959 body on it . like that I would have newer mechanic , brake ,diff ,tire etc.. all in one shot .

Is a 1988 C60 is the same as a 1988 GMC 7000 ?

mrolds88 07-01-2013 08:12 PM

Re: Gmc c60 1988
 
DG, you may still be able to update your truck. There was a post on here about C-60 axle/suspension. While the track is no good for you, the spindles, brakes and such MAY swap. If the axle weight rating is the same you may be able to do it. The rear axles, I can't say for sure. You have a nice looking truck. I had a similar, but bigger 59 a few years ago. It was a 348/5speed/2/speed setup. It was a 10400 series. Wish I never got rid of that thing.

Flat 67 07-02-2013 02:08 AM

Re: Gmc c60 1988
 
Quote:

Originally Posted by DG Racing (Post 6151677)

Is a 1988 C60 the same as a 1988 GMC 7000 ?

There are several spring rating, but a C60 is the same as a GMC 7000.

Also like mrolds88 said , have you considered narrowing the front axle?

Check out this YouTube video about a company called Kelderman on a project by Stacy David on Gears.
http://www.youtube.com/watch?feature...&v=woUdGkOsQco

Flat 67 07-02-2013 02:36 AM

Re: Gmc c60 1988
 
DG

"1966 Snub-nose C60 project" is planning on narrowing his front axle 8 inch

Flat67

mrolds88 07-02-2013 10:42 AM

Re: Gmc c60 1988
 
Actually what I wqas thinking was to swap the newer spindle units onto the original axle.

DG Racing 07-06-2013 12:27 AM

Re: Gmc c60 1988
 
thanks guys for the info but I think I will go in a different route then with the c-60 1988


All times are GMT -4. The time now is 01:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com