fuel line info needed
I’ve got a 2002 6.0L engine going into my 70 with the fuel tank and pump in the rear. I’m looking for suggestions on where to purchase my fuel supply and return lines and filter.
Thanks |
Re: fuel line info needed
I used the info in the FAQ on Fuel and bought most of my stuff from Summit and Amazon which ever was cheaper. It's still not cheap but it worked out great.
|
Re: fuel line info needed
10-4 thanks. I'll go there, forgot about that resource.
|
Re: fuel line info needed
I went to the pick and pull with a tubing cutter and cut 6 ends off of donor trucks, I left enough steel so that I could use double flares and inverted brass connectors. You can borrow the double flare tool from AutoZone or orylies. Napa sells the brass inverted connection s. Yo Cain use stock lines or do like me. I bought a 25 foot roll of 3/8 coated fuel line cheap at auto zone. I run a inline fuel filter from Wal-Mart. The 3/8 push connectors fit right on it. I'm also running a 02 camaro fuel tank and pump
|
Re: fuel line info needed
That is a smart way to get it done! Thanks
|
Re: fuel line info needed
I used the Dorman nylon fuel line kit and summit heat sleeve (on the run up to the back of the engine), it is just like the factory stuff on new cars.
|
Re: fuel line info needed
Quote:
|
Re: fuel line info needed
2 Attachment(s)
Here you go
|
All times are GMT -4. The time now is 06:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com