Quote:
Originally Posted by kglowacky
Someone on this board was(is) machining the OEM temp. sensor down to fit the LS 1 head, Can't seem to find him on old threads, HELP Please.
|
I have been modifying the original sensors to fit the later model Vortec heads but not for LS family engines.
The standard sensor has 1/2"-NPT threads, the Vortec heads are 3/8"-NPT
the LS is 12mm
There isn't enough material to modify the original sensor to 12mm (.472")
here's a cut-away of an original sensor, the small end is .550" diameter.
