Quote:
Originally Posted by KevinK7
I'm relatively new on these trucks and learning as I go along, and it seems odd, the Dana60 rear doesn't show on the SPID?
My truck came from the factory as Cab & Chassis, with Utility body installed (most likely from day one) with it's original 396, NP435 4-speed and a Dana60 Coil spring rear. Along with Special paint, I guess I was lucky to find it : )
https://imageevent.com/hvclassics/au...=1&n=1&l=0&z=9 |
The Dana 60 was not necessarily an optional rear axle. On my truck it did have a powerloc (G87 option code) so that option shows on the spid, but otherwise the Dana 60 was a standard axle for the truck in my case ('72 C20 402/400), thus standard axle was Dana 60 with coils. If it would have been a GMC I believe same would apply, but standard would have been leaf spring rear with the Dana. Someone else might be able to comment on the small block trucks, but this was research I did with regard to my truck, and aside from the G87 option, Dana 60 was standard for it, thus does not appear on the spid.