IN WTB 15 x 8 6-lug steel wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DANTIP** · 11-13-2017, 09:44 PM

Beginning to look for a set of 6-lug 15" x 8" steel wheels that accept the dog-dish center cap. This is for a '71 K10.

Thx!

**too much stuff** · 11-13-2017, 11:49 PM

May have a set of 4 to part with. Would be in the $400 plus ship range if you want me to look them over. They will probably need blasting and paint.

**DANTIP** · 11-14-2017, 07:44 AM

Quote:

Originally Posted by too much stuff

May have a set of 4 to part with. Would be in the $400 plus ship range if you want me to look them over. They will probably need blasting and paint.

I'm interested, please post or email a few pics. I'll PM my email address to you.

Dan

Msaslp · 11-14-2017, 12:35 AM

I have a set of 6 lug 15x8 steel rally wheels with center caps and trim rings. I actually think there is 5 of them total. Only 4 caps and rings. I would be interested in selling them or trading them. Do you have anything to trade?

flashed · 11-14-2017, 08:16 AM

Would standard 6 lug wheels widened to 8" wheels be desirable ,a guy not far from me does a great job widening wheels . Im about to get him to widen a set for a K10 we just bought .

sambrutay · 11-14-2017, 09:59 AM

check with Jeff Cooper
Cooper Restorations

**too much stuff** · 11-18-2017, 09:26 PM

Dug them out today for pics. May have some pitting on a couple after blasting. I don't see any curb rash on them, but can look them over again. Let me know either way.
Eric

**DANTIP** · 11-20-2017, 05:05 PM

Quote:

Originally Posted by too much stuff

Dug them out today for pics. May have some pitting on a couple after blasting. I don't see any curb rash on them, but can look them over again. Let me know either way.
Eric

I'm going to pass for now. I'm told the wheels are now being reproduced.

Dan

**a1vintage69** · 11-20-2017, 09:51 PM

Quote:

Originally Posted by DANTIP

I'm going to pass for now. I'm told the wheels are now being reproduced.

Dan

Dan, let us know who makes these wheels now. Thanks, a1

**jimer1964** · 11-20-2017, 10:15 PM

Quote:

Originally Posted by too much stuff

Dug them out today for pics. May have some pitting on a couple after blasting. I don't see any curb rash on them, but can look them over again. Let me know either way.
Eric

Some one will grab these up if they were closer I would be interested

sambrutay · 11-21-2017, 05:53 AM

https://www.wheelvintiques.com/15x8-...backspace.html

tjsblazer · 11-21-2017, 10:02 PM

Quote:

Originally Posted by sambrutay

https://www.wheelvintiques.com/15x8-...backspace.html

Just FYI, all the 15x8 OE wheels that I have had are 3.875" backspacing. Those are 4.25". Not sure if being set in 3/8" more will make a difference or not to clearance at a tie rod end or another component.

Elliot949 · 11-25-2017, 06:47 PM

Quote:

Originally Posted by sambrutay

https://www.wheelvintiques.com/15x8-...backspace.html

You want to be careful with the Vintique wheels... they have a 4.25 BS where the Factory has 3.75 BS... That can be a problem... My 67 2wd can't take more that the 3.75...

Just a Heads Up...

sambrutay · 11-27-2017, 08:58 AM

also can be had with 4" back spacing

62-580604 15x8 6x5.5

http://www.jegs.com/i/Wheel-Vintique...80604/10002/-1

11-13-2017, 09:44 PM	#1
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	WTB 15 x 8 6-lug steel wheels Beginning to look for a set of 6-lug 15" x 8" steel wheels that accept the dog-dish center cap. This is for a '71 K10. Thx!

11-13-2017, 11:49 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,710	Re: WTB 15 x 8 6-lug steel wheels May have a set of 4 to part with. Would be in the $400 plus ship range if you want me to look them over. They will probably need blasting and paint. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-14-2017, 12:35 AM	#4
Msaslp Registered User Join Date: May 2016 Location: Greer, SC Posts: 4	Re: WTB 15 x 8 6-lug steel wheels I have a set of 6 lug 15x8 steel rally wheels with center caps and trim rings. I actually think there is 5 of them total. Only 4 caps and rings. I would be interested in selling them or trading them. Do you have anything to trade?

11-14-2017, 08:16 AM	#5
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: WTB 15 x 8 6-lug steel wheels Would standard 6 lug wheels widened to 8" wheels be desirable ,a guy not far from me does a great job widening wheels . Im about to get him to widen a set for a K10 we just bought .

11-14-2017, 09:59 AM	#6
sambrutay Registered User Join Date: Dec 2010 Location: Louisville KY Posts: 619	Re: WTB 15 x 8 6-lug steel wheels check with Jeff Cooper Cooper Restorations __________________ Bruce 1964 C10 SWB #Junk 1979 C10 utility #cargopants (sold) 1971 GMC Sprint (sold) 1974 GMC Grande Sierra (sold)

11-18-2017, 09:26 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,710	Re: WTB 15 x 8 6-lug steel wheels Dug them out today for pics. May have some pitting on a couple after blasting. I don't see any curb rash on them, but can look them over again. Let me know either way. Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-21-2017, 05:53 AM	#11
sambrutay Registered User Join Date: Dec 2010 Location: Louisville KY Posts: 619	Re: WTB 15 x 8 6-lug steel wheels https://www.wheelvintiques.com/15x8-...backspace.html __________________ Bruce 1964 C10 SWB #Junk 1979 C10 utility #cargopants (sold) 1971 GMC Sprint (sold) 1974 GMC Grande Sierra (sold)

11-27-2017, 08:58 AM	#14
sambrutay Registered User Join Date: Dec 2010 Location: Louisville KY Posts: 619	Re: WTB 15 x 8 6-lug steel wheels also can be had with 4" back spacing 62-580604 15x8 6x5.5 http://www.jegs.com/i/Wheel-Vintique...80604/10002/-1 __________________ Bruce 1964 C10 SWB #Junk 1979 C10 utility #cargopants (sold) 1971 GMC Sprint (sold) 1974 GMC Grande Sierra (sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.