The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-18-2005, 04:54 AM   #26
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
I think Tom said it weighed 3300 with an aluminum headed bigblock and a driver but at the time it had roll pans, and no tailgate!
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 04-18-2005, 05:22 AM   #27
4x4Poet
Registered User
 
Join Date: Nov 2004
Location: "Under Montana skies."
Posts: 1,836
Awesome drag pic!

I'm luvin the cage and all its tie-ins. Great design.
__________________
'71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.
4x4Poet is offline   Reply With Quote
Old 04-18-2005, 08:27 AM   #28
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Stroker I love that pic and I always have! I have called Tom a hundred times asking questions so my 71 would work like this truck! I called him friday and he made me an offer I couldn't refuse! I am going to race it like it is for this year and maybe put it on a diet, and change it to a fleet over the winter!

Touch of madness Its only a trailer queen cause it has no motor or tranny! It will be driven on the streeet as well as down the track!
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 04-27-2005, 11:41 AM   #29
67ChevyC10Stepside
Registered User
 
67ChevyC10Stepside's Avatar
 
Join Date: Mar 2004
Location: Butler PA
Posts: 3,034
dont change it to fleet....it's SOOO MUCH cooler like it is...
__________________
67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon)
WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.
67ChevyC10Stepside is offline   Reply With Quote
Old 04-27-2005, 12:09 PM   #30
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
you want to buy a nice tubbed out stepside bed with a new gate and an aluminum bedcover and wing 600.00

Kevin
3346575583
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 04-27-2005, 12:18 PM   #31
Big69C20 Toy
Livin' it up.
 
Big69C20 Toy's Avatar
 
Join Date: Nov 2001
Location: Richland, MI
Posts: 2,212
that's one sweet truck, and you'll have one heck of a time in it i'm sure.
__________________
-Greg;
Sold the 69 C20. It's off to a better home with more love!
Now onto the 86 CUCV M1009; K5 blazer with 6.2L diesel, corp 10 bolt axles, Detroit locker in the rear, trutrac front, 3.73 gears, 35" tires.
Big69C20 Toy is offline   Reply With Quote
Old 04-27-2005, 12:35 PM   #32
rambler
MOVE OVER
 
rambler's Avatar
 
Join Date: Jun 2002
Location: Warrensburg, MO
Posts: 5,470
WOW,, thats all I can say!
__________________
No matter where you are..... There you are...
Buckaroo Banzi
rambler is offline   Reply With Quote
Old 04-27-2005, 04:55 PM   #33
Billy G
Registered User
 
Billy G's Avatar
 
Join Date: May 2003
Location: Dayton, Tx (in Old River)
Posts: 286
Are the steering column and dash assembly for sale????....lol

Great Lookin' Truck!!!!!!!!
__________________
My FAMOUS LAST WORDS...."Ima Gonna!!"

- 1970 GMC 1500 swb/step 250 I-6 3 spd - "The GEM"
- 1976 Chev Scotsdale swb/step 350/350 - "The JEWEL"
- 1982 Chev C-10 swb/step 250 I-6 3 spd -
- 2001 Chev Silverado LT -
Billy G is offline   Reply With Quote
Old 04-27-2005, 07:22 PM   #34
68 Stepside
huh?
 
68 Stepside's Avatar
 
Join Date: May 2000
Location: Washington, Illinois
Posts: 5,692
AWESOME!!! I've always loved that truck. And for your question on the rage'nrat.....the 638 is CRAZY...been there, done that, glad to still be living after that ride.... LOL
__________________
Someday when I'm lonely,
Wishing you weren't so far away,
Then I will remember
Things we said today.

RIP El Jay
68 Stepside is offline   Reply With Quote
Old 04-27-2005, 08:12 PM   #35
Peregrine
Registered User
 
Peregrine's Avatar
 
Join Date: Sep 2004
Location: Louisville, Ky
Posts: 329
If you're gonna drive it on the street I would pay good money to see peoples faces when you pull the wheels at a light. I have a lot of evil thoughts going through my head.
__________________
Brian
72 C10 longbed 350/th400

Let the world change you and you will change the world.
Peregrine is offline   Reply With Quote
Old 04-27-2005, 09:28 PM   #36
67ChevyC10Stepside
Registered User
 
67ChevyC10Stepside's Avatar
 
Join Date: Mar 2004
Location: Butler PA
Posts: 3,034
i dont have the money for the bed...but 67dragtruck is a step....thats just how everyone knows it....every freakin truck out there is a fleet...nice to see one that's different
__________________
67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon)
WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.
67ChevyC10Stepside is offline   Reply With Quote
Old 04-27-2005, 11:32 PM   #37
FirstGen
Just Don't Stop!
 
FirstGen's Avatar
 
Join Date: Feb 2004
Location: Dallas
Posts: 1,239
junk the step, that's just keeps one less one on the road like mine!!! haha j/k.
__________________
1968 C10 build in process
TT LSA/6L90e/9"
FirstGen is offline   Reply With Quote
Old 04-28-2005, 12:54 AM   #38
68LSS1
Registered User
 
68LSS1's Avatar
 
Join Date: Dec 2002
Location: Tampa
Posts: 1,191
djracer, got any pictures of the bed? And what did Tom use to seal the extensions (cage) that are through the firewall?
__________________
'68 Short Step
LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc
68LSS1 is offline   Reply With Quote
Old 04-28-2005, 02:57 AM   #39
rwgregory
Registered User
 
Join Date: Apr 2005
Location: Chula Vista, California
Posts: 495
Cup holders & power windows on a strip machine??? Stereo speakers in the
doors???

I must be gettin' old or something...

rwgregory
__________________
rwgregory

67 GMC 2500 ,2w/d wide box
305 V-6, 4-speed
rwgregory is offline   Reply With Quote
Old 04-28-2005, 08:51 AM   #40
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
67chevyc10step
I admired Tom's truck for years but its going to get a new look! I don't want anything like is not uniquely mine! I'll include a pic of my last race car! It was nicer outside but not as nice as the truck chassis wise! It went 9.20 @ 143 with a alcohol injected 468.



Rw
Those are a couple of things I'm not crazy about but is great for street use! If I can finish my really nice street truck I will put this truck on a serious diet!
Attached Images
 
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 04-28-2005, 09:04 AM   #41
NPilot1975
Senior Member
 
NPilot1975's Avatar
 
Join Date: Aug 2002
Location: Plymouth, MA
Posts: 891
Beautiful car. I love old Camaros. They look sweet as Pro-Streeters.
__________________
1972 Blazer body...need to get a thread started for the rest of the story
NPilot1975 is offline   Reply With Quote
Old 04-28-2005, 11:20 AM   #42
67ChevyC10Stepside
Registered User
 
67ChevyC10Stepside's Avatar
 
Join Date: Mar 2004
Location: Butler PA
Posts: 3,034
yeah what your saying about unique is fine....but the stepside is just sexy....fleetside is plain as hell...
__________________
67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon)
WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.
67ChevyC10Stepside is offline   Reply With Quote
Old 04-28-2005, 11:24 AM   #43
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Yeah and you know the old saying about opinions!
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 04-28-2005, 11:33 AM   #44
67ChevyC10Stepside
Registered User
 
67ChevyC10Stepside's Avatar
 
Join Date: Mar 2004
Location: Butler PA
Posts: 3,034
well i mean look around....how many fleets do you see compared to steps...that's all im saying...i know when i first saw the truck i thought it was cool but the thing i noticed first was it was a stepside...pretty cool cause it's not the same old truck everyone else has.
__________________
67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon)
WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.
67ChevyC10Stepside is offline   Reply With Quote
Old 04-28-2005, 01:17 PM   #45
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Its ccol because of lots of reasons but in my eyes the step bed is less aerodynamic and takes away from the truck! I'll post pics of my progress as I go! I hope to take a nice truck and make an AWESOME truck!
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 04-28-2005, 02:00 PM   #46
JerseyGirl
American Woman!
 
JerseyGirl's Avatar
 
Join Date: Jan 2005
Location: TN
Posts: 1,046
That is AWESOME!!
__________________
Tree Was Here!
Click here to see pics of my new rig!
JerseyGirl is offline   Reply With Quote
Old 04-28-2005, 03:48 PM   #47
kwhite4
Junior Member
 
kwhite4's Avatar
 
Join Date: Oct 2004
Location: Gatesville texas
Posts: 180
Lucky dog.
Coolest truck I know.
I would take that bed if you werent so far away.

Have fun
__________________
68 GMC
565 BBC
Abruzzi super pro glide
9.85@135.00
kwhite4 is offline   Reply With Quote
Old 04-29-2005, 08:46 AM   #48
cowboy33713
Senior Member
 
Join Date: Apr 2005
Location: metro Phoenix, AZ
Posts: 241
dj;
I see what you meant in our recent phone conversation! I MAY need to rethink my 67....when I become less broke!
cowboy
cowboy33713 is offline   Reply With Quote
Old 04-29-2005, 12:07 PM   #49
68LSS1
Registered User
 
68LSS1's Avatar
 
Join Date: Dec 2002
Location: Tampa
Posts: 1,191
djracer, got any pictures of the bed? And what did Tom use to seal the extensions (cage) that are through the firewall?
__________________
'68 Short Step
LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc
68LSS1 is offline   Reply With Quote
Old 05-18-2005, 10:35 PM   #50
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
This might not look like much progress

But you should have seen my shop a couple of monthes ago! Me and several of my buddies threw away 60 plus yards of crap! Now it time to get down to business! I am going to sell this bed if anyone is interested! I'd take 800 with the aluminum wing new tailgate aluminum bed cover and new chrome rear bumper!
Attached Images
     
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com