Any upholstery guys here??? got a question for ya... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Shane* · 08-06-2002, 03:39 PM

I was wondering how many square yards of material it would take to do the interior of a truck....rough guess-timation maybe?

- seat
- entire roof (not just where the stock headliner was - but from windshield to back glass and door to door)
- interior "A" and "B" pillars
- the back wall (section from the rear window to the floor and wrapping around to both side doors)
- the door panels (window to door bottom - roddoor style panels)
- the inner kickpanels
- top of dash
- face of dash
- dash pad

I am unsure if I will cover all the above items, but wanted to figure for enough material if I decide to. I have the chance to buy some leather hides and am unsure of how much will be needed for this....any reply is much appreciatted

Thanks!

70c10 · 08-06-2002, 04:34 PM

Shane,
You will need about 8 yards to do everything you mentioned!

72chevyLWB · 08-06-2002, 06:51 PM

Like this? I don't know how much it took but it only cost $600 installed. And it does go over and around the rear window and entire headliner.

08-06-2002, 03:39 PM	#1
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Any upholstery guys here??? got a question for ya... I was wondering how many square yards of material it would take to do the interior of a truck....rough guess-timation maybe? - seat - entire roof (not just where the stock headliner was - but from windshield to back glass and door to door) - interior "A" and "B" pillars - the back wall (section from the rear window to the floor and wrapping around to both side doors) - the door panels (window to door bottom - roddoor style panels) - the inner kickpanels - top of dash - face of dash - dash pad I am unsure if I will cover all the above items, but wanted to figure for enough material if I decide to. I have the chance to buy some leather hides and am unsure of how much will be needed for this....any reply is much appreciatted Thanks! Last edited by Shane; 08-06-2002 at 03:50 PM.

08-06-2002, 04:34 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Shane, You will need about 8 yards to do everything you mentioned! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-06-2002, 06:51 PM	#3
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	Like this? I don't know how much it took but it only cost $600 installed. And it does go over and around the rear window and entire headliner. Attached Images __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.