Seats Blazer Top, etc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

xcracer · 08-18-2005, 01:14 PM

I have a nice top and hatch for 72 blazer, its a little dirty, but its in nice shape with the exception of one broken side window. Im asking $175 complete. Buyer must pickup. I also have a pair of blazer bucket seats that need recovered, and drivers seat needs some foam, but are all there with brackets. Im asking $200/obo for these. I am not willing to ship these either, as both would be too expensive i feel. I guess i have a 72 Blazer chassis with just the front and rear diffs if anyone needs something like that, it cant be worth much. Im located in Albert Lea, MN which is at the intersection of I-90 andI-35. Thanks.
Pete

p.s. I will try to get some pics in the next day or two.

71swb4x4 · 08-18-2005, 01:41 PM

Pete
I am interested in the top and hatch. If you could post pictures ot email them to me I would appreciate it. shawnstorhaug@hotmail.com Is it a double wall or single wall top?
Shawn

xcracer · 08-18-2005, 11:36 PM

I will get some pics in the morning hopefully, had to get a new battery for the camera. From what I understand it is a double wall. It bolts up from the underside, so the way I understand it, that means its double, but I could be wrong.

71swb4x4 · 08-19-2005, 12:31 AM

I already have a double wall, I was hoping yours would be a single wall.
If you are interested in selling the hatch and hatch hardware seperate let me know, mine is cracked and I could use a better one.

72 Cheyenne K20 · 08-19-2005, 01:38 AM

Hey Pete, I would be interested in top and seats. Please put me in line. I live just up the road from you in Owatonna.

Thanks, Scott

badpeanut · 08-19-2005, 09:47 AM

I'm looking for a 3.08 posi rear 12-bolt rearend. Do you know what your rear diff is?

xcracer · 08-19-2005, 04:41 PM

I really dont want to seperate at this point, sorry. As far as the rear end, I believe it is 3.08, but I dont think it is posi. Scott ive got the pictures, now I just need to figure out how to get them on here.

xcracer · 08-19-2005, 05:20 PM

How do you get the pics to download when it says they are too big .

LUV2XCLR8 · 08-19-2005, 05:26 PM

^ Just resize them, check the FAQ's section

xcracer · 08-19-2005, 06:27 PM

here we go

71swb4x4 · 08-19-2005, 08:23 PM

Are you parting the whole thing out? Do you have the front and rear cargo area carpet strip trim. I am also looking for the top tailgate trim that holds the inside weatherstripping, and the same piece on the sides, they mount to the tub and butt up against the tailgate.
Shawn

xcracer · 08-21-2005, 09:16 PM

I think there is the piece on the tailgate, but the rest i dont see

LUV2XCLR8 · 08-21-2005, 10:00 PM

Quote:

Originally Posted by xcracer

I think there is the piece on the tailgate

If 71swb4x4 doesn't want it I do, pending pic's

71swb4x4 · 08-21-2005, 11:25 PM

I am interested if you want to sell it, but would like to see pics and a price first.
Shawn

xcracer · 08-23-2005, 01:24 AM

Hey Shawn,
I actually have the tailgate piece, and both rear sides. I was thinking they should be worth $15. But there is a problem. I dont seem to be able to get the screws loose on the tailgat piece ! lol. I would throw the whole tailgate in for that price actually, but then the shipping would really suck. How often do you get through Albert Lea ? You could just pick the stuff up if you wanted. Call me greedy, but I just dont want to spend 3 hours getting it off for $15. Maybe I could cut that section off I guess. Let me know.

Pete

71swb4x4 · 08-23-2005, 09:40 AM

Pete, unfortunately I don't have plans to go that way in the near future. If you can't get it off I will take the side pieces if they are in decent shape. I understand not wanting to spend too much time on the gate.
Shawn

LUV2XCLR8 · 08-23-2005, 03:16 PM

Could you not just drill out the screw heads? Just a thought

Paul72 · 08-23-2005, 07:07 PM

Hey Shawn,

I drive right thru Albert Lea when I head home. I will be meeting another board member in Brookings in the near future, and could deliver for a nominal fee

Let me know. I'm heading up Thurs night this week, and usually go up every 3-4 weeks.

Paul

71swb4x4 · 08-23-2005, 08:33 PM

Paul, that would be great. I actually caught up with Jeff last night and he told me he was interested in some parts you have. If it works out I would appreciate it.
Shawn

08-18-2005, 01:14 PM	#1
xcracer Registered User Join Date: Apr 2005 Location: Albert Lea, MN Posts: 15	Seats Blazer Top, etc I have a nice top and hatch for 72 blazer, its a little dirty, but its in nice shape with the exception of one broken side window. Im asking $175 complete. Buyer must pickup. I also have a pair of blazer bucket seats that need recovered, and drivers seat needs some foam, but are all there with brackets. Im asking $200/obo for these. I am not willing to ship these either, as both would be too expensive i feel. I guess i have a 72 Blazer chassis with just the front and rear diffs if anyone needs something like that, it cant be worth much. Im located in Albert Lea, MN which is at the intersection of I-90 andI-35. Thanks. Pete p.s. I will try to get some pics in the next day or two.

08-18-2005, 01:41 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Pete I am interested in the top and hatch. If you could post pictures ot email them to me I would appreciate it. shawnstorhaug@hotmail.com Is it a double wall or single wall top? Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. Last edited by 71swb4x4; 08-18-2005 at 01:43 PM.

08-19-2005, 12:31 AM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I already have a double wall, I was hoping yours would be a single wall. If you are interested in selling the hatch and hatch hardware seperate let me know, mine is cracked and I could use a better one. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-19-2005, 05:26 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,472	^ Just resize them, check the FAQ's section __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-19-2005, 06:27 PM	#10
xcracer Registered User Join Date: Apr 2005 Location: Albert Lea, MN Posts: 15	here we go Attached Images

08-18-2005, 11:36 PM	#3
xcracer Registered User Join Date: Apr 2005 Location: Albert Lea, MN Posts: 15	I will get some pics in the morning hopefully, had to get a new battery for the camera. From what I understand it is a double wall. It bolts up from the underside, so the way I understand it, that means its double, but I could be wrong.

08-19-2005, 01:38 AM	#5
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Hey Pete, I would be interested in top and seats. Please put me in line. I live just up the road from you in Owatonna. Thanks, Scott

08-19-2005, 09:47 AM	#6
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,756	I'm looking for a 3.08 posi rear 12-bolt rearend. Do you know what your rear diff is?

08-19-2005, 04:41 PM	#7
xcracer Registered User Join Date: Apr 2005 Location: Albert Lea, MN Posts: 15	I really dont want to seperate at this point, sorry. As far as the rear end, I believe it is 3.08, but I dont think it is posi. Scott ive got the pictures, now I just need to figure out how to get them on here.

08-19-2005, 05:20 PM	#8
xcracer Registered User Join Date: Apr 2005 Location: Albert Lea, MN Posts: 15	How do you get the pics to download when it says they are too big .

08-19-2005, 08:23 PM	#11
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Are you parting the whole thing out? Do you have the front and rear cargo area carpet strip trim. I am also looking for the top tailgate trim that holds the inside weatherstripping, and the same piece on the sides, they mount to the tub and butt up against the tailgate. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-21-2005, 09:16 PM	#12
xcracer Registered User Join Date: Apr 2005 Location: Albert Lea, MN Posts: 15	I think there is the piece on the tailgate, but the rest i dont see

08-21-2005, 11:25 PM	#14
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I am interested if you want to sell it, but would like to see pics and a price first. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-23-2005, 01:24 AM	#15
xcracer Registered User Join Date: Apr 2005 Location: Albert Lea, MN Posts: 15	Hey Shawn, I actually have the tailgate piece, and both rear sides. I was thinking they should be worth $15. But there is a problem. I dont seem to be able to get the screws loose on the tailgat piece ! lol. I would throw the whole tailgate in for that price actually, but then the shipping would really suck. How often do you get through Albert Lea ? You could just pick the stuff up if you wanted. Call me greedy, but I just dont want to spend 3 hours getting it off for $15. Maybe I could cut that section off I guess. Let me know. Pete

08-23-2005, 09:40 AM	#16
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Pete, unfortunately I don't have plans to go that way in the near future. If you can't get it off I will take the side pieces if they are in decent shape. I understand not wanting to spend too much time on the gate. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.



Register or Log In To remove these advertisements.

08-23-2005, 03:16 PM	#17
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,472	Could you not just drill out the screw heads? Just a thought __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-23-2005, 07:07 PM	#18
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Hey Shawn, I drive right thru Albert Lea when I head home. I will be meeting another board member in Brookings in the near future, and could deliver for a nominal fee Let me know. I'm heading up Thurs night this week, and usually go up every 3-4 weeks. Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

08-23-2005, 08:33 PM	#19
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Paul, that would be great. I actually caught up with Jeff last night and he told me he was interested in some parts you have. If it works out I would appreciate it. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

Register or Log In To remove these advertisements.