Suburban Third/Dummy Door Felt & Scrapers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 10-08-2006, 01:06 PM

Just found out the hard way that the Suburban third and dummy door felt and scrapers are not compatable witht the front/truck doors. I thought I could just use another set of fronts by cutting them to length... nope. The clip slots and clips are at different widths.

So now I'll either have to try to move the clips without bending them, or find a vendor for the right parts. Anyone know where to find these?

68plus4sub · 10-08-2006, 10:07 PM

I think I got mine from the "Truck Shop".....the one down in California. I'm sure ECE has them as well. Also, Dave at DC Truck Parts usually stock that kind of stuff. He is in Vancouver if you don't know him already.

Later,

Jason

Frizzle Fry · 10-08-2006, 11:39 PM

Ya I've been there a few times. Like it. Prices are highish, but cheaper if you factor lack of shipping. I think he's the one who told me to just cut the front door pieces, but maybe I'm wrong. I'll call him.

Dwn2rth76 · 10-09-2006, 01:32 AM

Frizzle,
I got a price from Dans Classic in portland a while back
I dont recall the price but they werent much. I picked up
my front ones there. They have pretty good prices on most stuff.
Dwn2rth76

**gregfull** · 10-09-2006, 12:32 PM

Frizzle, did you try Classic Heartbeat? They're in your part of the county, I got mine from Outback truck parts near Houston. Here's a couple of links:

Classic Heartbeat - http://www.classicheartbeat.com/

Outback - http://www.outbacktruckparts.com/

Good luck.

Frizzle Fry · 10-09-2006, 05:03 PM

Quote:

Originally Posted by Dwn2rth76

Frizzle,
I got a price from Dans Classic in portland a while back
I dont recall the price but they werent much. I picked up
my front ones there. They have pretty good prices on most stuff.
Dwn2rth76

Are you drivin that thing? Why don't I see it around town? Thanks, I've been to Dan's too. Prices are higher, but it is closer. They are really good about trading for stuff if you have any decent items to offer. I'll check them out too.

Thanks

Dwn2rth76 · 10-09-2006, 09:13 PM

Quote:

Originally Posted by Frizzle Fry

Are you drivin that thing? Why don't I see it around town? Thanks, I've been to Dan's too. Prices are higher, but it is closer. They are really good about trading for stuff if you have any decent items to offer. I'll check them out too.

Thanks

I dont drive it as much as I'd like, but I do drive it often.
I dropped a new motor in a few months back, which i'll post when I get a chance. I'm getting ready to replace the rockers soon with a buddy. I saw your a couple months ago in a praking lot, Pretty sweet....

Frizzle Fry · 10-10-2006, 02:35 AM

Quote:

Originally Posted by gregfull

Frizzle, did you try Classic Heartbeat? They're in your part of the county, I got mine from Outback truck parts near Houston. Here's a couple of links:

Classic Heartbeat - http://www.classicheartbeat.com/

Outback - http://www.outbacktruckparts.com/

Good luck.

Neither of those seem to list them in their online catalogs, but they probably carry them. If I can't get them locally I'll try them. Thanks!

10-08-2006, 01:06 PM	#1
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Suburban Third/Dummy Door Felt & Scrapers? Just found out the hard way that the Suburban third and dummy door felt and scrapers are not compatable witht the front/truck doors. I thought I could just use another set of fronts by cutting them to length... nope. The clip slots and clips are at different widths. So now I'll either have to try to move the clips without bending them, or find a vendor for the right parts. Anyone know where to find these?

10-08-2006, 10:07 PM	#2
68plus4sub Registered User Join Date: Jan 2004 Location: Portland, Oregon Posts: 210	Re: Suburban Third/Dummy Door Felt & Scrapers? I think I got mine from the "Truck Shop".....the one down in California. I'm sure ECE has them as well. Also, Dave at DC Truck Parts usually stock that kind of stuff. He is in Vancouver if you don't know him already. Later, Jason __________________ 1972 Chevrolet Suburban ('68 front clip), 2wd, 350/350, factory tilt 2008 Kawasaki Concours 14 1997 Harley-Davidson Soft Tail Custom 1948 Chevrolet Coupe (project) 1972 Porsche 914

10-08-2006, 11:39 PM	#3
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Suburban Third/Dummy Door Felt & Scrapers? Ya I've been there a few times. Like it. Prices are highish, but cheaper if you factor lack of shipping. I think he's the one who told me to just cut the front door pieces, but maybe I'm wrong. I'll call him.

10-09-2006, 01:32 AM	#4
Dwn2rth76 Registered User Join Date: Feb 2005 Location: Reno, NV Posts: 22	Re: Suburban Third/Dummy Door Felt & Scrapers? Frizzle, I got a price from Dans Classic in portland a while back I dont recall the price but they werent much. I picked up my front ones there. They have pretty good prices on most stuff. Dwn2rth76

10-09-2006, 12:32 PM	#5
gregfull Registered User Join Date: Jan 2004 Location: Richmond, Texas Posts: 598	Re: Suburban Third/Dummy Door Felt & Scrapers? Frizzle, did you try Classic Heartbeat? They're in your part of the county, I got mine from Outback truck parts near Houston. Here's a couple of links: Classic Heartbeat - http://www.classicheartbeat.com/ Outback - http://www.outbacktruckparts.com/ Good luck. __________________ My Suburban Project 72 Suburban 68 SWB 57 Belair 55 Cameo 06 Chevy 1/2 ton crew 09 Suburban



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.