|
10-17-2006, 07:38 PM
|
#1 |
|
Registered User
Join Date: Oct 2006
Location: denver nc
Posts: 97
|
Brake advice
I have been reading the posts on drum to disc conversions and am not sure which way to go. I just bought a 70 cst. Why not just put 72 stuff on it? I don't mind going to 5 lug. I guess I would change the rear axles also. If I did would it just be the spindals, calipers, rotors, MC and propor valve. I assume the control arms are the same. Any advice appreciated
|
|
|
|
10-17-2006, 08:07 PM
|
#2 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: Brake advice
72 fits well but replacement parts are more expensive. The reason to use 73-up stuff is because of the price of parts plus if you use the control arms you will have rubber arm bushing slightly better ride.
|
|
|
|
|
10-17-2006, 08:18 PM
|
#3 |
|
Registered User
Join Date: Oct 2006
Location: denver nc
Posts: 97
|
Re: Brake advice
Does the 70 not have rubber bushings in the control arms? And what are the pros and cons of 5 lug or 6 lug?
|
|
|
|
|
10-18-2006, 03:01 AM
|
#4 |
|
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: Brake advice
I recommend the 73+ due to the rubber bushings and cheaper parts that are easier to work with. It used to be that 5 lug was recommended due to the wider variety of wheel styles out there, but not so much anymore-alot more variety in 6 lug nowdays.
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
