|
05-14-2002, 10:05 AM
|
#1 |
|
I am Kayser Soze
Join Date: Jul 2001
Location: Texas
Posts: 116
|
engine rebuild pics
Here are photos from the tear-down of my Chevy's engine last Saturday. http://homepage.mac.com/elgatoloco/PhotoAlbum4.html
We took the valve cover, head and oil pan off. Pulled the pistons, dropped the crank, removed the bearings, oil pump and pickup. Pulled the fuel pump, distributor, water pump, thermostat housing and timing cover. We scraped out the piston ring grooves and after cleaning the carbon off one of the piston heads, found that my engine's been bored to 40 over. Cool! We got the main bearings replaced and the rings, oil pump and pickup should be in this afternoon. The lifters looked great, the head had no pits, grooves or warping. We set the timing, the plugs looked great, and the pistons & bores looked really clean for the age of the truck. Now it's time to clean everything and reassemble. If I'm lucky, by Saturday night I should have a rebuilt and rockin' inline 6! Total cost of parts is about $200. Not bad.  68ChevC10 ------------------ 1968 Chevrolet C10 Stepside. My driver. Aint life cool.
__________________
1968 Chevrolet C10 Stepside. My driver. Ain't life cool. |
|
|
|
05-14-2002, 12:06 PM
|
#2 |
|
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Very cool! I'm going to save those pages.
------------------ WOU in Monmouth, Or 68 Camaro,250(No,I'm not putting in a 350!) 67,LWB,250(Again, I'm not putting in a 350!) a work in progress "Praise The Lowered"
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
|
|
|
|
05-14-2002, 12:16 PM
|
#3 |
|
Senior Member
 
Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
|
Who's the chuckle-head working that breaker bar?
lol ------------------ '69 3/4 ton C20 2wd w/ 350ci/400THM and a wood bed! '69 3/4 ton Custom 20 2wd w/ ORIGINAL 350ci/4sp Manual and a wood bed (parts beast). Seattle, WA. *See pics of my trucks and project at www.webshots.com!
__________________
'69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. |
|
|
|
|
05-14-2002, 12:16 PM
|
#4 |
|
Senior Moment
Join Date: Mar 2002
Location: Pittsburg Ca
Posts: 4,076
|
Looks like you guys had a great time doing it to. Hope it all turns out good.
------------------ Steve's 70 CST 02 Burb (wifes Truck) www.picturetrail.com/70CST
__________________
1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565 |
|
|
|
|
05-14-2002, 12:38 PM
|
#5 |
|
I am Kayser Soze
Join Date: Jul 2001
Location: Texas
Posts: 116
|
Heh, the chucklehead would be me. y cousin's father-in-law is a retired mechanical engineer who keeps a collection of pipes to use on stuck bolts. We shot that one especially for him. Gotta love simplicity like that, though.
It was fun, save for the lower back pain and the occasional threats made against stuck bolts. But, we didn't shear or strip anything, so all's well. I'll post more after this weekend. 68ChevC10 ------------------ 1968 Chevrolet C10 Stepside. My driver. Aint life cool.
__________________
1968 Chevrolet C10 Stepside. My driver. Ain't life cool. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
