Stoked on being a Member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NF65Fleetside · 12-24-2007, 11:29 PM

Met a lot of kewl people off of this site and just wanted to give a big shout out to Salazar44 for helping me out today with lending his engine hoist for my big block swap! Thanks to the rest of you that have coorisponded to all my inquiries to misc stuff. Happy Holidays!

72BlckButy · 12-25-2007, 01:37 AM

I know what you mean. This place if filled with great people that are always willing to lend a helping hand. Every board member I have met has been great.

Happy holidays!

**Chevy Fleetside** · 12-25-2007, 05:54 AM

salazar44 · 12-25-2007, 11:18 AM

Hey dude... no thanks needed! You did all the hard work! You and your girl were driving around all day making things happen, all I did was pull it out of the garage and help you lift it.

Hope to see you friday. Strip that bad boy down, get it degreased and replace all those gaskets/seals. The tiniest bit of grease will jack up ur rattle can job. If you get it all off it can look really sharp and hold up pretty well.

mtburg71 · 12-28-2007, 08:08 PM

That's what it is all about, helping each other out, just wish I could help more, but in time.

12-24-2007, 11:29 PM	#1
NF65Fleetside Registered User Join Date: Feb 2007 Location: Los Angeles Posts: 674	Stoked on being a Member Met a lot of kewl people off of this site and just wanted to give a big shout out to Salazar44 for helping me out today with lending his engine hoist for my big block swap! Thanks to the rest of you that have coorisponded to all my inquiries to misc stuff. Happy Holidays!

12-25-2007, 01:37 AM	#2
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Stoked on being a Member I know what you mean. This place if filled with great people that are always willing to lend a helping hand. Every board member I have met has been great. Happy holidays! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-25-2007, 05:54 AM	#3
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,779	Re: Stoked on being a Member __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 Last edited by Chevy Fleetside; 12-25-2007 at 05:54 AM.

12-25-2007, 11:18 AM	#4
salazar44 65 - Chevy C10 Join Date: Jun 2006 Location: Los Angeles, CA Posts: 625	Re: Stoked on being a Member Hey dude... no thanks needed! You did all the hard work! You and your girl were driving around all day making things happen, all I did was pull it out of the garage and help you lift it. Hope to see you friday. Strip that bad boy down, get it degreased and replace all those gaskets/seals. The tiniest bit of grease will jack up ur rattle can job. If you get it all off it can look really sharp and hold up pretty well. __________________ VIC One Repair Leads to Another! http://vix65chevyc10.blogspot.com

12-28-2007, 08:08 PM	#5
mtburg71 Registered User Join Date: Nov 2007 Location: Temple, Texas Posts: 75	Re: Stoked on being a Member That's what it is all about, helping each other out, just wish I could help more, but in time. __________________ 1964 GMC SWBFS 2005 Dodge Magnum RT



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.