How about some pics of High Performance haulers. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 02-03-2008, 04:15 AM

you can get a dual manual master cylinder for a 71 truck and make it work some of those trucks came with manual disc. you may have to shorten the rod or something. I went from drum to disc and used one of these on my uncles 66gmc

I wonder if these guy could do a front roll pan.

scatesracing · 02-03-2008, 09:09 AM

I like this truck

scatesracing · 02-03-2008, 09:11 AM

I think this is the same truck

scatesracing · 02-03-2008, 09:15 AM

http://www.dragtrucks.com/gilley/Chr...ge%5B1%5D.mpeg

djracer · 02-03-2008, 11:56 AM

Quote:

Originally Posted by scatesracing

http://www.dragtrucks.com/gilley/Chr...ge%5B1%5D.mpeg

That's a bad Beotch!

scatesracing · 02-04-2008, 03:31 AM

Quote:

Originally Posted by djracer

That's a bad Beotch!

twin turbo

dave brode · 11-16-2009, 12:25 PM

Hello All,

Here are some pics of my '71. I cut 9.75" from front of bed, rear frame section is 2x3x.1875", re-used stock trailing arms.

Dave

gastrader35 · 01-24-2010, 06:29 PM

MY 86 STREET/STRIP SHORT BED

zac78130 · 03-24-2012, 01:29 PM

best time 11.2 haven't put stroker in yet

454HO · 02-21-2008, 12:15 AM

Quote:

Originally Posted by scatesracing

http://www.dragtrucks.com/gilley/Chr...ge%5B1%5D.mpeg

Cool... that was at Houston Motorsports? I've never been to that track... must be a 1/8 mile.

hotrod 80 · 02-24-2008, 08:56 PM

I want to play . 355 , th350 , 9" 4.10 on a 26 x 8.5 slick , 150 shot

bigdiceman · 05-08-2008, 09:58 AM

Quote:

Originally Posted by 454HO

Cool... that was at Houston Motorsports? I've never been to that track... must be a 1/8 mile.

Yep its the 1/8 mile track off of East Mount Houston ,between 59 and 1-10.
For whoever was asking about Chris Shortridge he is from around the Temple area. He built that truck himself, and has run all kinds of small block combos in it. I dont know if he has a web site or not.

69trk · 06-01-2008, 10:41 PM

Finally figured out how to put this picture on here. Wish i could make it bigger though.

02-03-2008, 04:15 AM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Post pics of truck drag racing or racing trucks you can get a dual manual master cylinder for a 71 truck and make it work some of those trucks came with manual disc. you may have to shorten the rod or something. I went from drum to disc and used one of these on my uncles 66gmc I wonder if these guy could do a front roll pan. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 02-03-2008 at 04:16 AM.

02-03-2008, 09:09 AM	#2
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Post pics of truck drag racing or racing trucks I like this truck Attached Images

02-03-2008, 09:11 AM	#3
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Post pics of truck drag racing or racing trucks I think this is the same truck Attached Images

02-03-2008, 09:15 AM	#4
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Post pics of truck drag racing or racing trucks http://www.dragtrucks.com/gilley/Chr...ge%5B1%5D.mpeg

11-16-2009, 12:25 PM	#7
dave brode Registered User Join Date: Jun 2008 Location: Frostburg, Maryland Posts: 38	Re: How about some pics of High Performance haulers. Hello All, Here are some pics of my '71. I cut 9.75" from front of bed, rear frame section is 2x3x.1875", re-used stock trailing arms. Dave Attached Images __________________ '71 C-10 medium bed. Pump gas 454" +.030", stock valved 049s, dana 60 w/410s. 12.25 at 108.

01-24-2010, 06:29 PM	#8
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: How about some pics of High Performance haulers. MY 86 STREET/STRIP SHORT BED Attached Images

03-24-2012, 01:29 PM	#9
zac78130 Registered User Join Date: Dec 2011 Location: New Braunfels , Texas Posts: 8	Re: How about some pics of High Performance haulers. best time 11.2 haven't put stroker in yet Attached Images

02-24-2008, 08:56 PM	#11
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Post pics of truck drag racing or racing trucks I want to play . 355 , th350 , 9" 4.10 on a 26 x 8.5 slick , 150 shot

06-01-2008, 10:41 PM	#13
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: Post pics of truck drag racing or racing trucks Finally figured out how to put this picture on here. Wish i could make it bigger though. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.