project INCREDIBLE HULK 6.2L with 6L80E - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigSky71 · 02-05-2008, 04:51 AM

Great work and great documentation for the metal replacement!

6T9GMC · 02-06-2008, 03:06 AM

Hey, I Know When You Weld In The Patch Panels You Spot Weld And Keep Going In Different Areas, After Your Done Grinding It Down Smooth What Is The Inside Supposed To Look Like And Do You Grind It Down And Make It Smooth Too, Or Just Leave It?

68 short step · 02-06-2008, 03:24 AM

Quote:

Originally Posted by 6T9GMC

Hey, I Know When You Weld In The Patch Panels You Spot Weld And Keep Going In Different Areas, After Your Done Grinding It Down Smooth What Is The Inside Supposed To Look Like And Do You Grind It Down And Make It Smooth Too, Or Just Leave It?

depends on if that spot will ever be seen....in most cases the backside wont be visable, so the weld isnt ground down...but if it will be visable, ill grind it down...
on this truck, its gonna be nice from under it as well as from above, so the underside welds will be ground down and the underside will be bodyworked, too.

6T9GMC · 02-06-2008, 05:02 AM

Thanks. It's Looking Good!

02-05-2008, 04:51 AM	#1
BigSky71 LAIDOUT Join Date: Jan 2005 Location: NW Montana Posts: 928	Re: project INCREDIBLE HULK Great work and great documentation for the metal replacement! __________________ 67 2wd Shorty Build Pictures

02-06-2008, 03:06 AM	#2
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	Re: project INCREDIBLE HULK Hey, I Know When You Weld In The Patch Panels You Spot Weld And Keep Going In Different Areas, After Your Done Grinding It Down Smooth What Is The Inside Supposed To Look Like And Do You Grind It Down And Make It Smooth Too, Or Just Leave It?

02-06-2008, 05:02 AM	#4
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	Re: project INCREDIBLE HULK Thanks. It's Looking Good!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.