project 62

[scotts62]

Originally Posted by TimE

It looks like you will have plenty of room for whatever type of exhaust you want to run with the way the frame is setup. Looks nice.

What type of serpentine brackets are those? Just curious...

Hey whats up Tim,
Yea im hoping i do have enough room, would like to find someone around that did mandrel bending and i would just make my own.

They are off a '96 chevy pickup 4.3

[TimE]

You could just buy a header kit if that's the route you wanted to go. Well, actually, I guess it would be the flanges and several prebent mandrels and a collector.

That's interesting on the brackets. I had never seen that style before. Looks cool on that TPI motor.

I'm also guessing that you are upgrading the cam seeing as to how it's hanging halfway out of the motor.

[scotts62]

well that is actually a flat cam from way back and i am using it as a handle to move the block around, its actually a 305 block with just some old heads laying around im using as a mock up motor. Dont want to bang around and get the new machined ones dirty

[TimE]

Ok, I gotcha.

[scotts62]

Couple of tonights progress, made mounts for the cross sill on the bed



Roll pan

[TimE]

Looks good Scott.

You planning on custom bowtie tailights in the roll pan or is that just doodles to see if you like the look?

[scotts62]

Well i was thinking about cutting the bowties out and putting lexan behind with lights but also thinking about the 48" LED's, (not the light bar but the real ones) Or a couple 12" one each side, so im not positive on what will look good yet