The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-07-2009, 12:30 AM   #1
GMC70c20
Registered User
 
Join Date: Feb 2003
Location: Iowa
Posts: 974
how wide of a tire will fit

How wide of a tire will fit on a stock width rear end, before it rubs the leaf springs in the stock position but still fit inside the box wall (I will probably cut the stock wheel wells out)?
__________________
1970 c20 converted to c10 sleeper
1979 c20 the wood hauler
1991 honda civic daily driver

spray and pray baby
GMC70c20 is offline   Reply With Quote
Old 05-07-2009, 07:44 AM   #2
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Re: how wide of a tire will fit

I don't know about a leaf truck but if you swap to trailing arms you can fit a huge tire. I had a 71 with no mods to the wheel wells and had 28x12.5 sportsman pro m/t's on it with a 10 inch wheel.
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 05-07-2009, 10:12 PM   #3
drag_72
Ready to go fast!!
 
drag_72's Avatar
 
Join Date: Aug 2008
Location: Carthage,Mo
Posts: 219
Re: how wide of a tire will fit

i have the same question!!! what tire would fit with trailin arms and cut out wheel wells?
__________________
454 block .30 forged aluminum pistons
steel crank
valve job
Holley Strip Dominator intake
1030cfm holley carb, 250 plate shot
roller rockers Erson Solid cam split duration 307/310.
.575/.595 lift
milodon oil pan
fab. aluminum valve covers
4 bolt main splayed anodized caps
all studded
drag_72 is offline   Reply With Quote
Old 05-07-2009, 10:20 PM   #4
71Dragtruck
Registered User
 
71Dragtruck's Avatar
 
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
Re: how wide of a tire will fit

29x14.5/15 Hoosier Quicktime Pros on a 15x12" rim with 7.5" backspace will fit trailing arms and cut fenderwells, stock rearend.

http://67-72chevytrucks.com/vboard/s...d.php?t=276897

here is a old pic of my truck with this combo.

Narrowed rear I now run a 31x16.5" Mickey ET Street with lot's of room.
__________________
Speed is just a matter of money, question is how fast can you afford to go?
8.95@148.97mph all motor haven't tried bottle yet
Sponsored by:
Getz Oilfield Consulting
Hard Candy Customs

Last edited by 71Dragtruck; 05-07-2009 at 10:24 PM.
71Dragtruck is offline   Reply With Quote
Old 05-07-2009, 10:29 PM   #5
71Dragtruck
Registered User
 
71Dragtruck's Avatar
 
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
Re: how wide of a tire will fit

Here's a pic of the new tires.
Attached Images
 
__________________
Speed is just a matter of money, question is how fast can you afford to go?
8.95@148.97mph all motor haven't tried bottle yet
Sponsored by:
Getz Oilfield Consulting
Hard Candy Customs
71Dragtruck is offline   Reply With Quote
Old 05-07-2009, 11:44 PM   #6
Nolowrider
Senior Member
 
Nolowrider's Avatar
 
Join Date: Jan 2005
Location: New Orleans
Posts: 1,365
Re: how wide of a tire will fit

I have M/T 29x15R15 with 6.5 inch backspace, fits fine with about 1 inch from leaf spring.

The pic in my signature is old and without the new tires.

Last edited by Nolowrider; 05-07-2009 at 11:45 PM.
Nolowrider is offline   Reply With Quote
Old 05-08-2009, 07:18 AM   #7
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Re: how wide of a tire will fit

Quote:
Originally Posted by 71Dragtruck View Post
Here's a pic of the new tires.

What kind of tubular control arms are those?
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 05-08-2009, 09:44 AM   #8
71Dragtruck
Registered User
 
71Dragtruck's Avatar
 
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
Re: how wide of a tire will fit

Quote:
Originally Posted by djracer View Post
What kind of tubular control arms are those?
I can't remember for sure, thinking they are CPP if my memory is right, I bought them from a board member that went with air bags instead.
__________________
Speed is just a matter of money, question is how fast can you afford to go?
8.95@148.97mph all motor haven't tried bottle yet
Sponsored by:
Getz Oilfield Consulting
Hard Candy Customs
71Dragtruck is offline   Reply With Quote
Old 05-08-2009, 11:49 AM   #9
scatesracing
Machinist
 
scatesracing's Avatar
 
Join Date: Sep 2007
Location: Derby Kansas
Posts: 296
Re: how wide of a tire will fit

A friend of mine has 29 18.5 MT under his ...... its so close but there under there
scatesracing is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com