The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-16-2009, 07:51 AM   #26
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Re: rear suspension help

Here's why you want trailing arms. So you can leave like the ole farm truck.


http://yellowbullet.com/forum/showthread.php?t=143943
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 06-16-2009, 10:29 AM   #27
Outlaw72
Hay Team!!
 
Outlaw72's Avatar
 
Join Date: Jun 2003
Location: Ft. Worth, TX, USA
Posts: 366
Re: rear suspension help

Quote:
Originally Posted by djracer View Post
Here's why you want trailing arms. So you can leave like the ole farm truck.


http://yellowbullet.com/forum/showthread.php?t=143943
Trailing Arms are not his only trick, but he does have them and he has made them work with his setup as a whole. That truck is crazy sick....you should see it in person.
__________________
1972 Chevrolet Cheyenne LWB "Orange and White" 8)
Outlaw72 is offline   Reply With Quote
Old 06-18-2009, 02:25 PM   #28
Super73
Registered User
 
Super73's Avatar
 
Join Date: Nov 2007
Location: Bay Area, Ca
Posts: 2,841
Re: rear suspension help

Quote:
Originally Posted by SCOTI View Post
Basic physics would suggest an airbag acts very much like a spring when compressed to a certain extent: the bag (spring) will want to return to its uncompressed state or size (squish a ballon & it distorts, unsquish it & returns to its original form immediately).

I agree with what you are saying but, and this is a big but...

A bags spring rate is dependant on the weight applied and the PSI in the bag right? So, let's make a hypothetical situation here..

Bag situation
1500lb unsprung weight
Leverage ratio of 1.5
10" bag at full length and 7" at ride height
Effective spring rate would be 375lbs

Spring situation
1500lb unsprung weight
Leverage ratio of 1.5
13" spring at full length and 7" at ride height
Effective spring rate would be 187.5lbs

Most bags I have seen don't allow you to compress them as far as a spring. For istance, my front springs at free height stand 17 3/8" and were at 9" at ride height. That's 8 3/8" of compression and I still had a good 2.5" of travel before coil bind. I believe coil bind was 6 7/8". Talking 10 1/2" of travel the spring has. If there are bags on the market that will allow you to do that, then I could see it being done effectively.
__________________
------Motor---------------Bottle
60'---1.53---------------1.41
1/8---6.58 @ 105.92----5.87 @ 118.41
1/4---10.38 @ 126.97----9.24 @ 142.49
Super73 is offline   Reply With Quote
Old 06-18-2009, 03:13 PM   #29
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,919
Re: rear suspension help

That's sounds about right. The nature of airbags translates into a progressive spring rate on compression vs. a coil that can possibly be set-up for a linear rate.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com