The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-16-2010, 04:50 PM   #1
Joeys Toy
Registered User
 
Joeys Toy's Avatar
 
Join Date: Dec 2005
Location: Midland, Texas
Posts: 75
Re: throttle cable location? ('59 235)

Lets see if I can make this clear as mud. Would take a picture but my 56 is sitting in a pasture about 200 miles away.

The throttle cable will go down through the bracket. The cotter pin will need to be removed from the accelarator linkage and the throttle wire will run through the hole. You will need to go to the auto parts store and get a cable or wire clamp from the "HELP" section. the ones I have seen look like small brass tubes with a screw threaded into one end. There will be a hole in the middle of the tube to run the wire through then tighten the screw against the wire. Put the clamp on the wire below the acc. pedal linkage. When you work the pedal the linkage will slide up and down the throttle cable wire. When you pull the throttle cale out, it will pull the accelerator pedal down. If this doesn't help, I will try to get the engine back in my 53 GMC this week and will take pictures. Uses a different carb but same hook up.

Brian
Joeys Toy is offline   Reply With Quote
Old 05-16-2010, 08:17 PM   #2
alden
Registered User
 
alden's Avatar
 
Join Date: Jan 2009
Location: pomfret, md
Posts: 163
Re: throttle cable location? ('59 235)

Quote:
Originally Posted by Joeys Toy View Post
Lets see if I can make this clear as mud. Would take a picture but my 56 is sitting in a pasture about 200 miles away.

The throttle cable will go down through the bracket. The cotter pin will need to be removed from the accelarator linkage and the throttle wire will run through the hole. You will need to go to the auto parts store and get a cable or wire clamp from the "HELP" section. the ones I have seen look like small brass tubes with a screw threaded into one end. There will be a hole in the middle of the tube to run the wire through then tighten the screw against the wire. Put the clamp on the wire below the acc. pedal linkage. When you work the pedal the linkage will slide up and down the throttle cable wire. When you pull the throttle cale out, it will pull the accelerator pedal down. If this doesn't help, I will try to get the engine back in my 53 GMC this week and will take pictures. Uses a different carb but same hook up.

Brian

That clears it up, thanks!
alden is offline   Reply With Quote
Old 05-16-2010, 08:45 PM   #3
sgtusmc
Registered User
 
sgtusmc's Avatar
 
Join Date: Mar 2008
Location: Cali.
Posts: 958
Re: throttle cable location? ('59 235)

Here you go man, I hope this helps. It's my 59. Let me know if you need any other shots.





__________________
My build, 53 GMC / S10 swap
http://67-72chevytrucks.com/vboard/s...d.php?t=305723
My build, 59 Chevy / 88 fullsize swap
http://67-72chevytrucks.com/vboard/s...hlight=sgtusmc
U.S. Marines - Certified Counselors to the 72 Virgins Dating Club.
sgtusmc is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com