This Sat, last hurrah at the track with the 347ci motor. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Super73 · 08-12-2010, 01:58 AM

Well, looks like I will be taking the truck to a grudgefest this sat night. This will be the last voyage in the truck for this motor.

This time I will make sure I have all the timing in it on motor. Hoping to go low 11.4x on motor. Might take the 125-150lb tailgate off to try and go 11.3x NA

I know the N20 is working now since I took it to the deal in Dos Palos. It was a non timed 1/8 with no track prep. First stage was jetted with a 100 hit. Once I got rolling, I could get on the unit in first maybe 30-40' out. I do know I was doing about 102mph with a pig rich tune. Maybe I can get an 10.6x-10.7x on that stage out of the hole??

I'm also going to throw the 200hp jets in the second stage and hope it works right. Don't think I'll be able to use it out of the hole with the verter that is in it, but if I get on it going in to 2nd, maybe low 10's??

Sure would be nice..

dbmx66 · 08-12-2010, 08:23 AM

give it all its got boss. what engine you putting in?

team39763 · 08-12-2010, 09:59 AM

That 347 has impressed me from day one. That new motor sounds awesome too.

Super73 · 08-12-2010, 08:58 PM

Going up 71 inches with a 418 LS motor. Also putting my AFR heads on it over the ported stockers.

08-12-2010, 01:58 AM	#1
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	This Sat, last hurrah at the track with the 347ci motor. Well, looks like I will be taking the truck to a grudgefest this sat night. This will be the last voyage in the truck for this motor. This time I will make sure I have all the timing in it on motor. Hoping to go low 11.4x on motor. Might take the 125-150lb tailgate off to try and go 11.3x NA I know the N20 is working now since I took it to the deal in Dos Palos. It was a non timed 1/8 with no track prep. First stage was jetted with a 100 hit. Once I got rolling, I could get on the unit in first maybe 30-40' out. I do know I was doing about 102mph with a pig rich tune. Maybe I can get an 10.6x-10.7x on that stage out of the hole?? I'm also going to throw the 200hp jets in the second stage and hope it works right. Don't think I'll be able to use it out of the hole with the verter that is in it, but if I get on it going in to 2nd, maybe low 10's?? Sure would be nice.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

08-12-2010, 08:23 AM	#2
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	Re: This Sat, last hurrah at the track with the 347ci motor. give it all its got boss. what engine you putting in?

08-12-2010, 09:59 AM	#3
team39763 Registered User Join Date: Feb 2007 Location: Texas Posts: 469	Re: This Sat, last hurrah at the track with the 347ci motor. That 347 has impressed me from day one. That new motor sounds awesome too. __________________ 1982 Silverado - SBE, cleaned up GM heads, small cam, TH350, 850 Demon, 4.56 gears, and caltracs. Best time so far 11.8@XXXMPH

08-12-2010, 08:58 PM	#4
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: This Sat, last hurrah at the track with the 347ci motor. Going up 71 inches with a 418 LS motor. Also putting my AFR heads on it over the ported stockers. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.