|
09-17-2010, 12:55 PM
|
#1 |
|
Licensed driver
Join Date: Jun 2010
Location: Tarrytown, NY
Posts: 161
|
Shoulder Belts
Hello,
Curious about installing three point seat belts. See photo below - the plastic plugs are just behind each seat - all three rows. 1) These are for the shoulder strap, correct? 2) Do these just pop out? screw out? (I'd rather not ruin them to find out) 3) Are there threaded nuts under them ready for the aftermarket shoulder belts available or just a hole in the sheet metal? 4) How easy to install the aftermarket shoulder belts? (at LMT, Classic Part, Brothers) Thanks, Tim 
|
|
|
|
09-17-2010, 02:04 PM
|
#2 |
|
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: Shoulder Belts
In my burb I could just pry out the plastic plugs with my thumb nail, and there are threads behind each plug.
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
|
|
|
|
09-17-2010, 03:26 PM
|
#3 |
|
Coordinator of Synchronicity
 
Join Date: Dec 2005
Location: West of Houston, TX
Posts: 437
|
Re: Shoulder Belts
Same here, a buddy of mine said he used the shoulder portion of the seat belts out of a monte carlo and the stock button portion and the 3rd point bolted on with a torx type bolt that came with the belt, with no thread issues.
Now I am not sure what year model Monte he pulled them from but it looked stock. $.02
__________________
Rick 1971 Suburban ... W.I.P. Build Thread Customization is ones personal touch-- not what other people think it should be |
|
|
|
|
09-17-2010, 03:33 PM
|
#4 |
|
Restoring it $200 at a time...
Join Date: Aug 2008
Location: NE Kansas
Posts: 886
|
Re: Shoulder Belts
7/16-14 thread behind that plug.
__________________
Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0 |
|
|
|
|
09-17-2010, 11:40 PM
|
#5 | |
|
I had a V-8
Join Date: May 2003
Location: Phoenix AZ
Posts: 1,116
|
Re: Shoulder Belts
Quote:
__________________
1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE. |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
