67-72 Chevy & GMC's at SEMA 2010 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rustSpot · 11-10-2010, 02:44 PM

Thanks for all the kind words guys. Mitch visualized, Carter rendered and Status delivered is a easy way to put it. All the guys up at the shop worked really hard at completing the truck in time for SEMA. Mitch did recieve a SEMA Design Award for Best GM Truck. Great achievment for Status and Mitch Henderson Designs. Especially to obtain awards two years in a row. Here's a couple extra pics for you guys. Thanks again for appreciating the final outcome of this truck.

ajgriffin · 11-10-2010, 03:22 PM

Real nice truck you guys put together over there at Status. Do you have any shots of the suspension and engine bay?

Given this was at the Accuair booth, I'm sure there are lots of goodies to be seen there.

Also, what body mods did you all do?

**67cheby** · 11-10-2010, 03:24 PM

i would love to see these also, engine compartment , and inside of the bed (ie the inside of tailgate) Awesome work

**FRENCHBLUE72** · 11-10-2010, 08:34 PM

Is that lucy I see?

n2billet · 11-10-2010, 09:19 PM

Quote:

Originally Posted by FRENCHBLUE72

Is that lucy I see?

Good Eye! That's my old girl sitting in the corner......as bad as I hate to say it, they have ruined her by replacing the 6 cylinder with a v8.

cstm68 · 11-11-2010, 01:06 AM

Quote:

Originally Posted by n2billet

Good Eye! That's my old girl sitting in the corner......as bad as I hate to say it, they have ruined her by replacing the 6 cylinder with a v8.

dang. as much as i love v8's i cant picture lucy without that bad a$$ 6

rustSpot · 11-11-2010, 11:20 AM

Quote:

Originally Posted by n2billet

Good Eye! That's my old girl sitting in the corner......as bad as I hate to say it, they have ruined her by replacing the 6 cylinder with a v8.

Oh, I dont think it ruined the truck only changed it! It'll look nice again soon. Plus the 6 will look much better in my truck once it's completed!

rustSpot · 11-11-2010, 11:27 AM

Heres a couple. Ill have to get some chassis and engine compartments up once I find them.

**67cheby** · 11-11-2010, 12:00 PM

i love this truck... it is my screen saver , buttttt... the only problem i have is the steering wheel a 67-68 wheel would look much better in it !!

rustSpot · 11-11-2010, 01:08 PM

Quote:

Originally Posted by 67cheby

i love this truck... it is my screen saver , buttttt... the only problem i have is the steering wheel a 67-68 wheel would look much better in it !!

We all agree. We purchased a 68 wheel for the truck but couldnt seem to find a horn button before SEMA.

**67cheby** · 11-11-2010, 01:53 PM

thats makes sense....everything else looked so perfect but that wheel kept throwing me

mexgrhd68 · 11-11-2010, 04:38 PM

Quote:

Originally Posted by lolife99

A few more of "Sexual Chocolate", the project truck from StreetTrucks magazine.
It's hard to believe this is the same truck, that they started with.
Cool "shaved" door panels.

was the front cross member narrowed on that bad ass truck??????

rustSpot · 11-11-2010, 06:22 PM

Quote:

Originally Posted by mexgrhd68

was the front cross member narrowed on that bad ass truck??????

It's a Suicide Doors front crossmember. We narrowed their control arms.

mexgrhd68 · 11-12-2010, 04:46 AM

Quote:

Originally Posted by rustSpot

It's a Suicide Doors front crossmember. We narrowed their control arms.

is that dangerous to do? and can u narrow stock a-arms as well??

**FRENCHBLUE72** · 11-12-2010, 08:39 AM

Is that maple used in the bed?

Musclerodz · 11-13-2010, 02:02 AM

Quote:

Originally Posted by FRENCHBLUE72

Is that maple used in the bed?

I think it was and looked like a BED WOOD overlay

classicchev · 11-13-2010, 12:23 PM

Quote:

Originally Posted by FRENCHBLUE72

Is that maple used in the bed?

Maple or birch.

Great looking truck. Love the rims.

SCOTTMO · 11-13-2010, 03:04 PM

When i looked at it at the show it looked like,the wood did not have a finish
on it ??

classicchev · 11-13-2010, 05:19 PM

Quote:

Originally Posted by SCOTTMO

When i looked at it at the show it looked like,the wood did not have a finish
on it ??

Looks dull in the pics, maybe just sealer no clear.

GVizzle · 11-30-2010, 12:17 PM

Does anybody know what company produced the wood for the SEXy CHOCO project?

n2billet · 11-30-2010, 01:11 PM

Quote:

Originally Posted by GVizzle

Does anybody know what company produced the wood for the SEXy CHOCO project?

BedWood

http://bedwoodandparts.com/

GVizzle · 11-30-2010, 01:36 PM

Thanks Keith,

Thats what I had figured.

11-10-2010, 02:44 PM	#51
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: 67-72 Chevy & GMC's at SEMA 2010 Thanks for all the kind words guys. Mitch visualized, Carter rendered and Status delivered is a easy way to put it. All the guys up at the shop worked really hard at completing the truck in time for SEMA. Mitch did recieve a SEMA Design Award for Best GM Truck. Great achievment for Status and Mitch Henderson Designs. Especially to obtain awards two years in a row. Here's a couple extra pics for you guys. Thanks again for appreciating the final outcome of this truck. Attached Images

11-10-2010, 03:22 PM	#52
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: 67-72 Chevy & GMC's at SEMA 2010 Real nice truck you guys put together over there at Status. Do you have any shots of the suspension and engine bay? Given this was at the Accuair booth, I'm sure there are lots of goodies to be seen there. Also, what body mods did you all do? __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

11-10-2010, 03:24 PM	#53
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67-72 Chevy & GMC's at SEMA 2010 i would love to see these also, engine compartment , and inside of the bed (ie the inside of tailgate) Awesome work __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-10-2010, 08:34 PM	#54
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: 67-72 Chevy & GMC's at SEMA 2010 Is that lucy I see? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-11-2010, 11:27 AM	#58
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: 67-72 Chevy & GMC's at SEMA 2010 Heres a couple. Ill have to get some chassis and engine compartments up once I find them. Attached Images

11-11-2010, 12:00 PM	#59
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67-72 Chevy & GMC's at SEMA 2010 i love this truck... it is my screen saver , buttttt... the only problem i have is the steering wheel a 67-68 wheel would look much better in it !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-11-2010, 01:53 PM	#61
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67-72 Chevy & GMC's at SEMA 2010 thats makes sense....everything else looked so perfect but that wheel kept throwing me __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-12-2010, 08:39 AM	#65
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: 67-72 Chevy & GMC's at SEMA 2010 Is that maple used in the bed? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-13-2010, 03:04 PM	#68
SCOTTMO powdercoater Join Date: Dec 2008 Location: mesa,az Posts: 203	Re: 67-72 Chevy & GMC's at SEMA 2010 When i looked at it at the show it looked like,the wood did not have a finish on it ?? __________________ SCOTT

11-30-2010, 12:17 PM	#70
GVizzle Registered User Join Date: Oct 2008 Location: San Clemente, CA Posts: 405	Re: 67-72 Chevy & GMC's at SEMA 2010 Does anybody know what company produced the wood for the SEXy CHOCO project?

11-30-2010, 01:36 PM	#72
GVizzle Registered User Join Date: Oct 2008 Location: San Clemente, CA Posts: 405	Re: 67-72 Chevy & GMC's at SEMA 2010 Thanks Keith, Thats what I had figured.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.