|
11-08-2010, 08:07 AM
|
#1 |
|
Registered User
Join Date: Jul 2009
Location: Wylie Texas
Posts: 91
|
Tie rod ends
Im wondering what other tie rod ends for the S-10 spindle. I need to make a set of notchless for a guy that works with me. I know theres others that fit but have no model or part number. thanks
|
|
|
|
11-08-2010, 11:09 PM
|
#2 |
|
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Re: Tie rod ends
Some F body and full size car tie rod ends work. The joint end does not matter. The length does. The length must be short/long enough for adjustments.
|
|
|
|
|
11-09-2010, 07:14 AM
|
#3 |
|
Registered User
Join Date: Jul 2009
Location: Wylie Texas
Posts: 91
|
Re: Tie rod ends
In this case the length does matter and it needs to be very short. The stock S-10 tie rods are very long. I need some that are very short and fit the S-10 spindle. Im making a set of notchless tie rods for a guy that works with me. basically I need the ends and Im making the center from DOM tube.
I fugured maybe Nova or early Camaro might work. It may take a day trip to the wrecking yard to solve this mystery. I know some people make these already so I know its possible. |
|
|
|
|
11-11-2010, 12:54 AM
|
#4 |
|
Registered User
Join Date: Dec 2008
Location: baton rouge, LA
Posts: 77
|
Re: Tie rod ends
Michigan metal works uses an off the shelf balljoint on his. he has pics of them on myspace, id check them out and see if you find out what they are off of, b/c i doubt he will tell you.
|
|
|
|
|
11-11-2010, 06:56 AM
|
#5 |
|
Registered User
Join Date: Jul 2009
Location: Wylie Texas
Posts: 91
|
Re: Tie rod ends
Id rather just do the wrecking yard research. Ill take an S-10 spindle and see what else fits it.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
