MD W.T.B. 4x4 rear driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

olblue60@aol.com · 11-23-2010, 08:36 PM

I'm needing a 4x4 rear one piece driveshaft that connects differential to SM 465 - 4 speed trans to Rockwell transfercase combo. 69-70? Thanks for looking!!

John

seadonkey · 11-23-2010, 10:55 PM

Hi, I have one from a '67 shortbox 4x4 that had the rockwell t-case in it. Let me know if you need measurements, or PM me your e-mail address and I could get ya some pics.

olblue60@aol.com · 11-24-2010, 07:01 AM

Seadonkey
I'm looking for a one piece from a 69-70 long bed. Thanks!

John

**D.PASSMORE** · 11-24-2010, 07:35 AM

I might have one. How quick do you need it? Its about 2 hours away at my storage barn. BTW, I believe Rockwell LWB 4x4 had a 2 pc shaft. There is a cross sill that the bearing hung too. I have one of those too.
DP

olblue60@aol.com · 11-24-2010, 07:58 AM

Hi David,
I'm not sure of the years. My 1968 has a two piece driveshaft, but I have a 69 with a one piece (no good). I dont know if it was some kind of a conversion. Anyway, what I'm looking for is a one piece shaft for a conversion I'm making for a 4x4 around and at least 63" or so center to center of the Ujoints. Any year. Thanks

John

**D.PASSMORE** · 11-24-2010, 08:32 AM

I got one (one peice), still in the shipping tube. LOL, I think I got from Jerry Moss (original member), way back when. Opened it, measured it and put in back in the tube. Sold the project... Anyway not sure when i'll get out there, maybe this weekend, but for sure the first week of Dec.

olblue60@aol.com · 11-24-2010, 02:09 PM

Do you have any idea what you might be asking? Thanks

John

olblue60@aol.com · 11-24-2010, 06:15 PM

The shaft should strech out to about 68-69 inches + or - .

70BLAZERX2 · 11-24-2010, 06:20 PM

I have a 69 K/20 with the rockwell..longbed..I will measure it..I have a shaft out of a 73..If it is close to the same..$50 plus ride..I will check tomorrow..and let you know..correct 4 inch tube

olblue60@aol.com · 11-25-2010, 08:24 AM

Happy Thanksgiving !!!!

olblue60@aol.com · 11-26-2010, 10:44 AM

Again ??

olblue60@aol.com · 11-28-2010, 05:48 PM

ttt

**D.PASSMORE** · 12-03-2010, 09:16 AM

I measured it, Slip yoke pushed all the way down - 60" from center to center. And its balanced. LMK- David

olblue60@aol.com · 12-03-2010, 12:46 PM

Hi David
Thanks for the post. It sounds like what you have is an automatic driveshaft which may or may not work. I was hoping for something just a little longer , but this may possibly work. Could I get another measurement fully extended center to center, and a measurement from weld to weld on the tube too?

Thanks

John

70BLAZERX2 · 12-03-2010, 01:21 PM

Mine is 48 inches weld to weld..It wont work for you.

**D.PASSMORE** · 12-03-2010, 02:21 PM

Sure, it will be Sunday before I can post the meaurements.

olblue60@aol.com · 12-05-2010, 08:58 PM

Whats the legnth of your longest one piece 4wd rear driveshaft ? Help me end this search

olblue60@aol.com · 12-06-2010, 11:13 AM

retry

**D.PASSMORE** · 12-06-2010, 01:03 PM

Hey, I don't think its going to work, sorry I couldn't help you.

olblue60@aol.com · 12-06-2010, 01:29 PM

Thanks David , Tom and 70bkazerx2
I just went out and made a couple of calculations and it looks as though I'm going to need at least 61 3/4 fully compressed. It seems that only the one piece, 4 speed Rockwell 4wd shaft will work. They are the only ones that , I believe are long enough.

11-23-2010, 08:36 PM	#1
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	W.T.B. 4x4 rear driveshaft I'm needing a 4x4 rear one piece driveshaft that connects differential to SM 465 - 4 speed trans to Rockwell transfercase combo. 69-70? Thanks for looking!! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

11-23-2010, 10:55 PM	#2
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: W.T.B. 4x4 rear driveshaft Hi, I have one from a '67 shortbox 4x4 that had the rockwell t-case in it. Let me know if you need measurements, or PM me your e-mail address and I could get ya some pics.

11-24-2010, 07:01 AM	#3
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft Seadonkey I'm looking for a one piece from a 69-70 long bed. Thanks! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

11-24-2010, 07:35 AM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: W.T.B. 4x4 rear driveshaft I might have one. How quick do you need it? Its about 2 hours away at my storage barn. BTW, I believe Rockwell LWB 4x4 had a 2 pc shaft. There is a cross sill that the bearing hung too. I have one of those too. DP __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 11-24-2010 at 07:35 AM.

11-24-2010, 07:58 AM	#5
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft Hi David, I'm not sure of the years. My 1968 has a two piece driveshaft, but I have a 69 with a one piece (no good). I dont know if it was some kind of a conversion. Anyway, what I'm looking for is a one piece shaft for a conversion I'm making for a 4x4 around and at least 63" or so center to center of the Ujoints. Any year. Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

11-24-2010, 08:32 AM	#6
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: W.T.B. 4x4 rear driveshaft I got one (one peice), still in the shipping tube. LOL, I think I got from Jerry Moss (original member), way back when. Opened it, measured it and put in back in the tube. Sold the project... Anyway not sure when i'll get out there, maybe this weekend, but for sure the first week of Dec. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

11-24-2010, 02:09 PM	#7
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft Do you have any idea what you might be asking? Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

11-24-2010, 06:15 PM	#8
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft The shaft should strech out to about 68-69 inches + or - . __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 11-24-2010 at 06:17 PM.

11-24-2010, 06:20 PM	#9
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,311	Re: W.T.B. 4x4 rear driveshaft I have a 69 K/20 with the rockwell..longbed..I will measure it..I have a shaft out of a 73..If it is close to the same..$50 plus ride..I will check tomorrow..and let you know..correct 4 inch tube Last edited by 70BLAZERX2; 11-24-2010 at 06:20 PM.

11-25-2010, 08:24 AM	#10
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft Happy Thanksgiving !!!! __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 11-25-2010 at 08:24 AM.

11-26-2010, 10:44 AM	#11
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft Again ?? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

11-28-2010, 05:48 PM	#12
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft ttt __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

12-03-2010, 09:16 AM	#13
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: W.T.B. 4x4 rear driveshaft I measured it, Slip yoke pushed all the way down - 60" from center to center. And its balanced. LMK- David

12-03-2010, 12:46 PM	#14
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft Hi David Thanks for the post. It sounds like what you have is an automatic driveshaft which may or may not work. I was hoping for something just a little longer , but this may possibly work. Could I get another measurement fully extended center to center, and a measurement from weld to weld on the tube too? Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

12-03-2010, 01:21 PM	#15
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,311	Re: W.T.B. 4x4 rear driveshaft Mine is 48 inches weld to weld..It wont work for you.



Register or Log In To remove these advertisements.

12-03-2010, 02:21 PM	#16
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: W.T.B. 4x4 rear driveshaft Sure, it will be Sunday before I can post the meaurements.

12-05-2010, 08:58 PM	#17
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft Whats the legnth of your longest one piece 4wd rear driveshaft ? Help me end this search __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 12-05-2010 at 08:58 PM.

12-06-2010, 11:13 AM	#18
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft retry __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

12-06-2010, 01:03 PM	#19
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: W.T.B. 4x4 rear driveshaft Hey, I don't think its going to work, sorry I couldn't help you.

12-06-2010, 01:29 PM	#20
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: W.T.B. 4x4 rear driveshaft Thanks David , Tom and 70bkazerx2 I just went out and made a couple of calculations and it looks as though I'm going to need at least 61 3/4 fully compressed. It seems that only the one piece, 4 speed Rockwell 4wd shaft will work. They are the only ones that , I believe are long enough. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

Register or Log In To remove these advertisements.