Project Burro Viejo - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 03-12-2011, 01:49 PM

Nice new goodies..

**steinepstein** · 06-04-2011, 10:40 PM

Started to "shave" the firewall. All of the electrical components will be mount up under the dash. I had some female threaded blinds made out of 3/4" solid round. You can see two of them attached to the MSD coil. They are being welded under the dash to mount the components, so no screws or bolts are coming out of the firewall.

**steinepstein** · 06-04-2011, 10:42 PM

Panhard bar mocked up.

**steinepstein** · 06-19-2011, 10:03 PM

Continuing to mount all the electrical components on the underside of the dash. My ECU (Motec) is going to mount above the radio, so I cut out the old speaker pass-through and will be tacking in a solid piece.

Credit to "bad bagged 68.5" on the inserts he made on page 15 of his build, great idea. I will also be shaving my dash and not running a dash pad, thanks! Awesome build by the way...

**steinepstein** · 08-28-2011, 10:11 PM

Continuing to work on the firewall......

03-12-2011, 01:49 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project Burro Viejo Nice new goodies.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-04-2011, 10:40 PM	#2
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: Project Burro Viejo Started to "shave" the firewall. All of the electrical components will be mount up under the dash. I had some female threaded blinds made out of 3/4" solid round. You can see two of them attached to the MSD coil. They are being welded under the dash to mount the components, so no screws or bolts are coming out of the firewall. Attached Images __________________ Project Burro Viejo: http://67-72chevytrucks.com/vboard/s....php?p=3778216

06-04-2011, 10:42 PM	#3
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: Project Burro Viejo Panhard bar mocked up. Attached Images __________________ Project Burro Viejo: http://67-72chevytrucks.com/vboard/s....php?p=3778216

06-19-2011, 10:03 PM	#4
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: Project Burro Viejo Continuing to mount all the electrical components on the underside of the dash. My ECU (Motec) is going to mount above the radio, so I cut out the old speaker pass-through and will be tacking in a solid piece. Credit to "bad bagged 68.5" on the inserts he made on page 15 of his build, great idea. I will also be shaving my dash and not running a dash pad, thanks! Awesome build by the way... Attached Images __________________ Project Burro Viejo: http://67-72chevytrucks.com/vboard/s....php?p=3778216

08-28-2011, 10:11 PM	#5
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: Project Burro Viejo Continuing to work on the firewall...... Attached Images __________________ Project Burro Viejo: http://67-72chevytrucks.com/vboard/s....php?p=3778216



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.