72 Rear frame ends - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**gpat@earthlink.net** · 03-12-2011, 11:31 PM

Looking for end pieces of 72 rear frame about 6-8 " . The last owner cut them off so he could use a non stock bumper. Got any ideas? Thanks Pat.

**FRENCHBLUE72** · 03-13-2011, 12:46 AM

I see you seem to be looking for lots of parts I think id try the classified section and post up a w.t.b.

kd71jimmy · 03-13-2011, 01:02 AM

I have a '72 frame that I am about to use for my '71 with a roll pan...Not ready yet, but I will have them soon...KD

**gpat@earthlink.net** · 03-14-2011, 12:20 AM

When you have them available , please let me know. Thanks Pat

kd71jimmy · 04-07-2011, 04:45 PM

I cut those off of my frame...do you still need them??? KD

Mike C · 04-08-2011, 09:57 PM

If you can't find any cut-offs and want to go back to OEM bumper, I would think the pickup brackets would work or at least could be adapted.

FuelCellGuy · 04-11-2011, 07:39 AM

I've got a pair. Let me know if you still need them.
Posted via Mobile Device

03-12-2011, 11:31 PM	#1
gpat@earthlink.net Active Member Join Date: Jan 2011 Location: columbia, SC Posts: 156	72 Rear frame ends Looking for end pieces of 72 rear frame about 6-8 " . The last owner cut them off so he could use a non stock bumper. Got any ideas? Thanks Pat.

03-13-2011, 12:46 AM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 72 Rear frame ends I see you seem to be looking for lots of parts I think id try the classified section and post up a w.t.b. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-13-2011, 01:02 AM	#3
kd71jimmy Registered User Join Date: Jun 2006 Location: Saint Amant,Louisiana Posts: 65	Re: 72 Rear frame ends I have a '72 frame that I am about to use for my '71 with a roll pan...Not ready yet, but I will have them soon...KD

03-14-2011, 12:20 AM	#4
gpat@earthlink.net Active Member Join Date: Jan 2011 Location: columbia, SC Posts: 156	Re: 72 Rear frame ends When you have them available , please let me know. Thanks Pat

04-07-2011, 04:45 PM	#5
kd71jimmy Registered User Join Date: Jun 2006 Location: Saint Amant,Louisiana Posts: 65	Re: 72 Rear frame ends I cut those off of my frame...do you still need them??? KD

04-08-2011, 09:57 PM	#6
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,714	Re: 72 Rear frame ends If you can't find any cut-offs and want to go back to OEM bumper, I would think the pickup brackets would work or at least could be adapted. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

04-11-2011, 07:39 AM	#7
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: 72 Rear frame ends I've got a pair. Let me know if you still need them. Posted via Mobile Device



Register or Log In To remove these advertisements.