Jimbo's 67 Long bed step side build - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**oldman3** · 06-24-2011, 03:52 PM

Quote:

Originally Posted by Sazien

Nice Thats one of the best looking long beds Ive seen.

Thanks for the compliment I appreciate it.....Jim

**oldman3** · 06-24-2011, 08:49 PM

Ok back to work on the interior, again I will give as much detail as I can.

Half of the velcro strips have been attached to the inside roof of cab.

**oldman3** · 06-24-2011, 08:51 PM

Here the headliner piece has been sanded, etc.

**oldman3** · 06-24-2011, 08:53 PM

Here I'm smoothing out the edges after I glued the leather to the panel. This was done the same as the kick panel earlier, always glue half smooth out, then come back and do the other half.

**oldman3** · 06-24-2011, 08:55 PM

Installed their velcro pieces as per instruction, but I also installed double back tape for added holding of headliner to roof.

**oldman3** · 06-24-2011, 08:56 PM

Headliner installed in cab. Colors match better that this, just the way pic was taken.

**oldman3** · 06-24-2011, 08:59 PM

Door panel put in place, to check fit, etc. Here you can see where I got the two designs for floor and console side panels. The lauan pieces attached to black panel will be covered in leather to make into a two tone color.

68panelman · 06-24-2011, 09:01 PM

Love it guys. Great work. keep going!!!

**oldman3** · 06-24-2011, 09:01 PM

Getting ready to start on door panels. This is my temporary work table.

**oldman3** · 06-24-2011, 09:05 PM

Sorry I don't have pics showing each piece being done. Didn't know one day I would post this on the internet. The outside main panel was first covered with leather. Then darker leather was attached to the spear and also the arm rest. Then the lauan panel was attached to the main panel to separate the two colors. Hope that's clear?

**oldman3** · 06-24-2011, 09:07 PM

Better shot of panel with door open. Upper spear in dark leather matches the console spear. Lower dark piece matches the floor design.

**oldman3** · 06-24-2011, 09:09 PM

Pic 1 View of complete interior.

Pic 2 Another view.

David67 · 06-24-2011, 09:12 PM

very nice as usual... I really appreciate you taking the time to post up this build! Thanks a lot. If you don't mind me asking, who makes that dash panel/glove box door? I see the guages are by AutoMeter and I know I've seen that panel before but can't make out who it's made by.

**oldman3** · 06-24-2011, 09:13 PM

That's it for the interior, tomorrow is the rap up on the build.

...Jim

**oldman3** · 06-24-2011, 09:16 PM

Quote:

Originally Posted by 68panelman

Love it guys. Great work. keep going!!!

Appreciate it....Jim

**oldman3** · 06-24-2011, 09:24 PM

Quote:

Originally Posted by David67

very nice as usual... I really appreciate you taking the time to post up this build! Thanks a lot. If you don't mind me asking, who makes that dash panel/glove box door? I see the guages are by AutoMeter and I know I've seen that panel before but can't make out who it's made by.

Thank you for watching the build, I enjoyed posting it. Dash panels are by "NO LIMIT" are brushed aluminum and ran about $350 pair. Auto meter gauges are Ultra-lite series got them from Jeg's.

David67 · 06-24-2011, 09:28 PM

Thanks for the info. They look great.

**FRENCHBLUE72** · 06-24-2011, 09:31 PM

aRE THOSE ROD DOORS DOOR AND HEADLINER PANELS? wHERE DID THE SEATBELTS COME FROM?

**oldman3** · 06-24-2011, 11:47 PM

Quote:

Originally Posted by FRENCHBLUE72

aRE THOSE ROD DOORS DOOR AND HEADLINER PANELS? wHERE DID THE SEATBELTS COME FROM?

Yes the door panels and headliner panel are from ROD DOORS, I just changed things a little with the lauan pieces added. Seat belts are a 3 point retractable type, owner got them on E-Bay, not sure were from, sorry....Jim

**FRENCHBLUE72** · 06-25-2011, 08:11 AM

I see my caps lock action was backwards yesterday sorry about that but thanks for the info... Truck is very nice and has given me a few ideas to run with.

Cameron 1137 · 06-25-2011, 12:21 PM

Outstanding! When do you want to start on mine?....

strong arm steel fab · 06-25-2011, 02:12 PM

great work

bollybib · 06-25-2011, 09:50 PM

Hi Jim,

It's cool that you took all those pics back then so you can share them with us now. I'm a little sad that we're almost at the end now, I became a habitual reader of your thread. You metered out the pics at a nice pace. [applause]

I really got a lot out of your use of materials and methods to create such a work of art. It's beautiful. You should be proud and I'm sure Jimbo must be a happy camper, too.

Sorry to hear about your family's health issues. We're gettin' up there, no denyin'. However, your words of encouragement to others regarding their builds was very upbeat.

Looking forward to the last few posts on Jimbo's build.

Regards,

Jim

**oldman3** · 06-25-2011, 10:25 PM

Quote:

Originally Posted by FRENCHBLUE72

I see my caps lock action was backwards yesterday sorry about that but thanks for the info... Truck is very nice and has given me a few ideas to run with.

Glad anything I did can be of benefit, thank you for following the build....Jim

**oldman3** · 06-25-2011, 10:28 PM

Quote:

Originally Posted by Cameron 1137

Outstanding! When do you want to start on mine?....

Hate to say it Cam, but already have another project, don't like to say it, but my son mostly doing the work me helping on a 50 F**d coupe. Should keep him busy for awhile.....Jim

06-24-2011, 08:49 PM	#452
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Ok back to work on the interior, again I will give as much detail as I can. Half of the velcro strips have been attached to the inside roof of cab. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 08:51 PM	#453
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Here the headliner piece has been sanded, etc. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 08:53 PM	#454
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Here I'm smoothing out the edges after I glued the leather to the panel. This was done the same as the kick panel earlier, always glue half smooth out, then come back and do the other half. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 08:55 PM	#455
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Installed their velcro pieces as per instruction, but I also installed double back tape for added holding of headliner to roof. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 08:56 PM	#456
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Headliner installed in cab. Colors match better that this, just the way pic was taken. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 08:59 PM	#457
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Door panel put in place, to check fit, etc. Here you can see where I got the two designs for floor and console side panels. The lauan pieces attached to black panel will be covered in leather to make into a two tone color. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 09:01 PM	#458
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,455	Re: Jimbo's 67 Long bed step side build Love it guys. Great work. keep going!!!

06-24-2011, 09:01 PM	#459
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Getting ready to start on door panels. This is my temporary work table. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 09:05 PM	#460
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Sorry I don't have pics showing each piece being done. Didn't know one day I would post this on the internet. The outside main panel was first covered with leather. Then darker leather was attached to the spear and also the arm rest. Then the lauan panel was attached to the main panel to separate the two colors. Hope that's clear? Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 09:07 PM	#461
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Better shot of panel with door open. Upper spear in dark leather matches the console spear. Lower dark piece matches the floor design. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 09:09 PM	#462
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build Pic 1 View of complete interior. Pic 2 Another view. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 09:12 PM	#463
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Jimbo's 67 Long bed step side build very nice as usual... I really appreciate you taking the time to post up this build! Thanks a lot. If you don't mind me asking, who makes that dash panel/glove box door? I see the guages are by AutoMeter and I know I've seen that panel before but can't make out who it's made by. __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

06-24-2011, 09:13 PM	#464
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Jimbo's 67 Long bed step side build That's it for the interior, tomorrow is the rap up on the build....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-24-2011, 09:28 PM	#467
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Jimbo's 67 Long bed step side build Thanks for the info. They look great. __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

06-24-2011, 09:31 PM	#468
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Jimbo's 67 Long bed step side build aRE THOSE ROD DOORS DOOR AND HEADLINER PANELS? wHERE DID THE SEATBELTS COME FROM? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

06-25-2011, 08:11 AM	#470
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Jimbo's 67 Long bed step side build I see my caps lock action was backwards yesterday sorry about that but thanks for the info... Truck is very nice and has given me a few ideas to run with. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-25-2011, 12:21 PM	#471
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: Jimbo's 67 Long bed step side build Outstanding! When do you want to start on mine?.... __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily Last edited by Cameron 1137; 06-25-2011 at 12:22 PM.

06-25-2011, 02:12 PM	#472
strong arm steel fab Registered User Join Date: Sep 2010 Location: kelowna b.c. Posts: 6	Re: Jimbo's 67 Long bed step side build great work

06-25-2011, 09:50 PM	#473
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: Jimbo's 67 Long bed step side build Hi Jim, It's cool that you took all those pics back then so you can share them with us now. I'm a little sad that we're almost at the end now, I became a habitual reader of your thread. You metered out the pics at a nice pace. [applause] I really got a lot out of your use of materials and methods to create such a work of art. It's beautiful. You should be proud and I'm sure Jimbo must be a happy camper, too. Sorry to hear about your family's health issues. We're gettin' up there, no denyin'. However, your words of encouragement to others regarding their builds was very upbeat. Looking forward to the last few posts on Jimbo's build. Regards, Jim __________________ - Jim - My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911

Register or Log In To remove these advertisements.