New vendor for you wiring needs! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pyro · 06-12-2011, 12:46 PM

Well, sort of new. I've been around awhile but have been so busy setting the new shop up that I didn't get much time to be on here. Now that I have working internet at the shop it's a lot easier

Downriver Motorsports Wiring is a michigan based company. We handle everyhting from basic repair to full vehicle wiring. If you need a custom wiring harness built from scratch to fit a LS engine in you truck we do that. If you have a factory harness that you want modified to work in your truck we do that too.

I started the company after building prototype harnesses for 10 years for a supplier for the Big 3. While I was doing that I started wiring drag cars, hot rods, and such on the side. We only use top quality parts and never skimp on quality. If you have us modify a stock harness for you it won't come back without new coverings on it, profesionally taped using correct tape, not just cheap vinyl tape, and any unused circuits will not just be taped inside the harness, we remove the circuits properly. If we have to remove a wire from a splice we redo the splice so that one wire isn't hanging out. When the harness is done it will be bundled with the smallest diameter covering that will fit.

I know not everyone can bring thier truck to us to have it wired, but if you can give dimensions of what you need built for harnesses we can build it.

I also have a 1986 GMC Sierra standard cab long bed that's getting a 6.0 and a 4L80E setup and a 1991 Chevy Suburban that's rusty as heck, but still hauls like the day it came out of Flint, keep your eyes on the forums for updates on these two.

SBTork · 06-13-2011, 01:24 AM

very cool, welcome

**Clyde65** · 06-13-2011, 04:13 PM

PM sent

68 short step · 06-13-2011, 05:55 PM

could i geta idea on price for a harness for a 5.3/ 4l60e. that the wires are routed towards the rear of the engine...wiht the fuses and relays..

Pyro · 06-19-2011, 12:47 AM

Quote:

Originally Posted by 68 short step

could i geta idea on price for a harness for a 5.3/ 4l60e. that the wires are routed towards the rear of the engine...wiht the fuses and relays..

PM sent!

Warrens69GMC · 06-19-2011, 10:03 AM

Whats up with the website?

late68 · 07-21-2011, 09:49 PM

PM sent.

**Dieselwrencher** · 07-21-2011, 10:58 PM

Welcome to the board as a vendor! Do you ever get into the diesel swap harnesses?

smoky02 · 08-09-2011, 02:48 PM

Quote:

Originally Posted by 68 short step

could i geta idea on price for a harness for a 5.3/ 4l60e. that the wires are routed towards the rear of the engine...wiht the fuses and relays..

Could I get this also?

**Clyde65** · 08-09-2011, 02:59 PM

website still not working

06-12-2011, 12:46 PM	#1
Pyro Registered User Join Date: Jul 2004 Location: New Boston, MI Posts: 71	New vendor for you wiring needs! Well, sort of new. I've been around awhile but have been so busy setting the new shop up that I didn't get much time to be on here. Now that I have working internet at the shop it's a lot easier Downriver Motorsports Wiring is a michigan based company. We handle everyhting from basic repair to full vehicle wiring. If you need a custom wiring harness built from scratch to fit a LS engine in you truck we do that. If you have a factory harness that you want modified to work in your truck we do that too. I started the company after building prototype harnesses for 10 years for a supplier for the Big 3. While I was doing that I started wiring drag cars, hot rods, and such on the side. We only use top quality parts and never skimp on quality. If you have us modify a stock harness for you it won't come back without new coverings on it, profesionally taped using correct tape, not just cheap vinyl tape, and any unused circuits will not just be taped inside the harness, we remove the circuits properly. If we have to remove a wire from a splice we redo the splice so that one wire isn't hanging out. When the harness is done it will be bundled with the smallest diameter covering that will fit. I know not everyone can bring thier truck to us to have it wired, but if you can give dimensions of what you need built for harnesses we can build it. I also have a 1986 GMC Sierra standard cab long bed that's getting a 6.0 and a 4L80E setup and a 1991 Chevy Suburban that's rusty as heck, but still hauls like the day it came out of Flint, keep your eyes on the forums for updates on these two.

06-13-2011, 01:24 AM	#2
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,856	Re: New vendor for you wiring needs! very cool, welcome __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

06-13-2011, 04:13 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: New vendor for you wiring needs! PM sent __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

06-13-2011, 05:55 PM	#4
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: New vendor for you wiring needs! could i geta idea on price for a harness for a 5.3/ 4l60e. that the wires are routed towards the rear of the engine...wiht the fuses and relays..

06-19-2011, 10:03 AM	#6
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,613	Re: New vendor for you wiring needs! Whats up with the website?

07-21-2011, 09:49 PM	#7
late68 Registered User Join Date: Mar 2011 Location: Spring, Tx Posts: 365	Re: New vendor for you wiring needs! PM sent. __________________ 1968 C10 SWB Dropped 5 in tha back 3 in tha front My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=470902

07-21-2011, 10:58 PM	#8
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: New vendor for you wiring needs! Welcome to the board as a vendor! Do you ever get into the diesel swap harnesses? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-09-2011, 02:59 PM	#10
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: New vendor for you wiring needs! website still not working __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.