|
12-13-2011, 10:30 PM
|
#9 |
|
Registered User
Join Date: Nov 2011
Location: Edmond, OK.
Posts: 1,362
|
Re: Crash's 72 K10
It was too humid to paint with the POR15 today, so I decided to clean the frame up even more. First I removed some old brackets. Then I decided I would box the area where the LB to SB conversion was done. First step was to create some templates out of cardboard.
    Then I transferred the temple shape to some 3/16” plate and cut them pieces out using my hand grinder and some cutoff wheels. It took about 25 minutes to cut pieces out and trim them to size. After that I welded them into place.       After that I figured I should degrease the frame, I had handled it with grease gloves during the cleanup and boxing.     I also degreased and prepped the axles for paint.  Back to work tomorrow, but I hope to be back to the shop Thursday to finally start the paint on the frame. |
|
|
| Bookmarks |
|
|
Threaded Mode