The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-27-2012, 04:29 PM   #1
JNJchev77
Registered Cruiser
 
JNJchev77's Avatar
 
Join Date: Mar 2010
Location: Mesa, AZ
Posts: 918
Re: 5.3 Rebuild... need some opinions

Well, I've decided to leave the bottom end alone. Going to change out the following, let me know if I missed anything...

Fel Pro Gasket set
GMPP Oil pan w/ pick up tube and windage tray - done
melling M295 oil pump - done
water pump - done
Trick flow or Comp Cam - Timing chain double roller
LS6 cam - done
LS6 valve springs with retainers - done
new chrom moly push rods
lifters
New "Barbell" plug

Anything you guys recommend...?
__________________
77' Chevy SB
Dropmembered Front and Rear
5.3/4l60e combo
JNJchev77 is offline   Reply With Quote
Old 03-28-2012, 02:50 AM   #2
code4
Registered User
 
Join Date: Feb 2005
Location: kalispell, Montana
Posts: 54
Re: 5.3 Rebuild... need some opinions

Quote:
Originally Posted by JNJchev77 View Post
Well, I've decided to leave the bottom end alone. Going to change out the following, let me know if I missed anything...

Fel Pro Gasket set
GMPP Oil pan w/ pick up tube and windage tray - done
melling M295 oil pump - done
water pump - done
Trick flow or Comp Cam - Timing chain double roller
LS6 cam - done
LS6 valve springs with retainers - done
new chrom moly push rods
lifters
New "Barbell" plug

Anything you guys recommend...?
Here is my list on a build I am doing right now, 5.3 bored out to 3.898. I have reused some of these gaskets without trouble in the past. This list is not quite complete because I had some of the parts already. Hope this helps.

Cam Position Sensor #12561211
$48.98

Crank Position Sensor #12560228
$48.67


Intake Air Temp Camaro #12160244
$14.23

Intake Air Temp Camaro Grommet #24504388
$9.90

Front Main Seal #12585673
$14.62

Crank Pulley Bolt #12557840 (TTY not reusable)
$3.29

Head Gasket Kit 3.898 bore #12498544
$28.37

Head Bolt Kit (1 head) #12498545 (TTY not reusable)
X 2 $42.02

Water Pump Gasket #12630223
X 2 $6.48

Knock Sensor #12589867
X 2 $85.10

Exhaust Manifold Gasket #12617944
X2 $18.94

Intake Manifold Gasket Truck #89060413
$63.54

Camshaft Lifter Kit #12499225
$113.46

Rear Main Seal #89060436
$13.77

Knock Sensor Grommet #12558177
$11.90

Valve Cover Gasket #12637683
$26.76


EGR Block Off Plate #12558346
$13.51

Oil Pump Oil Ring #12557752
$18.30

Front Cover Gasket #1263390
$15.55

Oil Pan Gasket #12612350
$23.30

Valley Cover Gasket #12637683
$13.38


Oil galley rear plug w/seal 12573460
4.39

ls2 timing chain set from Yank
72.00 shipped

TSP OIL PUMP
179.99
code4 is offline   Reply With Quote
Old 03-28-2012, 12:31 PM   #3
JNJchev77
Registered Cruiser
 
JNJchev77's Avatar
 
Join Date: Mar 2010
Location: Mesa, AZ
Posts: 918
Re: 5.3 Rebuild... need some opinions

Code, thanks for the parts list with #'s. Big help!
__________________
77' Chevy SB
Dropmembered Front and Rear
5.3/4l60e combo
JNJchev77 is offline   Reply With Quote
Old 03-29-2012, 01:02 PM   #4
JNJchev77
Registered Cruiser
 
JNJchev77's Avatar
 
Join Date: Mar 2010
Location: Mesa, AZ
Posts: 918
Re: 5.3 Rebuild... need some opinions

Anyone used this gasket kit for 5.3 rebuild?

http://www.summitracing.com/parts/SLP-260-1880/

It's about $100 cheaper than the Fel-Pro kit...
__________________
77' Chevy SB
Dropmembered Front and Rear
5.3/4l60e combo
JNJchev77 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:19 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com