Rear bumper brackets on a 63-66 fleetside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

edflores · 04-15-2012, 04:55 PM

Does anyone have a pic of the brackets on the frame, but without the bumper?
I have a 62 with a shortened 63-66 frame.

edflores · 04-15-2012, 11:59 PM

No one?

vin63 · 04-16-2012, 08:39 AM

Is there something in particular you're looking for (how the brackets bolt to the frame or the bolt spacing at the bumper, etc.)?

edflores · 04-16-2012, 10:36 AM

Quote:

Originally Posted by vin63

Is there something in particular you're looking for (how the brackets bolt to the frame or the bolt spacing at the bumper, etc.)?

How the brackets bolt to the frame. I dont have any original hole so I dont know how far in and where to drill.

vin63 · 04-16-2012, 08:13 PM

Fleetside or stepside? For the fleetside, the straight bracket mounts to the inside of the frame with the bumper bolt tabs pointing to the center, the angled brackets mount to the outside of the frame with the bumper bolt tabs pointing to the outside.

edflores · 04-16-2012, 08:39 PM

Quote:

Originally Posted by vin63

Fleetside or stepside? For the fleetside, the straight bracket mounts to the inside of the frame with the bumper bolt tabs pointing to the center, the angled brackets mount to the outside of the frame with the bumper bolt tabs pointing to the outside.

Its a fleetside. That pic helps a lot thanks
Im wondering why the bumper brackets have a flare at the bottom too

04-15-2012, 04:55 PM	#1
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Rear bumper brackets on a 63-66 fleetside Does anyone have a pic of the brackets on the frame, but without the bumper? I have a 62 with a shortened 63-66 frame.

04-15-2012, 11:59 PM	#2
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: Rear bumper brackets on a 63-66 fleetside No one?

04-16-2012, 08:39 AM	#3
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,261	Re: Rear bumper brackets on a 63-66 fleetside Is there something in particular you're looking for (how the brackets bolt to the frame or the bolt spacing at the bumper, etc.)? __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

04-16-2012, 08:13 PM	#5
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,261	Re: Rear bumper brackets on a 63-66 fleetside Fleetside or stepside? For the fleetside, the straight bracket mounts to the inside of the frame with the bumper bolt tabs pointing to the center, the angled brackets mount to the outside of the frame with the bumper bolt tabs pointing to the outside. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.