How about some pics of Static Dropped C-10's - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

INSIDIOUS '86 · 01-07-2013, 01:06 AM

Quote:

Originally Posted by ivorton74

sid...are those wheels coys or what are they?

A/R torque thrust twos
Posted via Mobile Device

**RenoKeene** · 01-10-2013, 03:48 PM

2-1/2" drop spindles and 1/2 a coil cut off of new 3/4 ton springs (stock for a big block) in front and 5" drop coils, shock relocators with new stock shocks and a adj track bar in back on 15" ralleys.

jlsanborn · 01-10-2013, 04:16 PM

Nice stepper!!! What size rubber?

shiner,tx · 01-11-2013, 12:04 PM

what lens did you use for the photo, i like the 3-d shot.

Malo83 · 01-15-2013, 05:14 PM

4/5 drop with 2 cut coils on the front and flip kit on the rear, 15x9 rims and 275-50-15 TA's all around.

Uploaded with ImageShack.us

franciscocl7 · 01-21-2013, 11:34 PM

Here is mine...

Blazer383 · 01-24-2013, 07:55 AM

I looked through this whole thread and all the drops that are the same look different from truck to truck. I'm having a hard time figuring what drop to go with.
Posted via Mobile Device

MDc10 · 01-24-2013, 11:40 AM

Quote:

Originally Posted by Blazer383

I looked through this whole thread and all the drops that are the same look different from truck to truck. I'm having a hard time figuring what drop to go with.
Posted via Mobile Device

How low are you wanting to go? To be honest if you.can afford it you should.bag it, that way you can adjust your ride height. I went with a 5.5/6 on my 86 Silverado and to be honest I dont like it its a rough ride, but the streets here are terrible. So I recently bought 4 link and bags, wish I would have went that way to start. Guess it all depends on what you.want and what you want to.spend, anyways there's some good info on here about both. What type truck you looking to lower?
Posted via Mobile Device

Blazer383 · 01-24-2013, 12:44 PM

Quote:

Originally Posted by MDc10

How low are you wanting to go? To be honest if you.can afford it you should.bag it, that way you can adjust your ride height. I went with a 5.5/6 on my 86 Silverado and to be honest I dont like it its a rough ride, but the streets here are terrible. So I recently bought 4 link and bags, wish I would have went that way to start. Guess it all depends on what you.want and what you want to.spend, anyways there's some good info on here about both. What type truck you looking to lower?
Posted via Mobile Device

I have a 1971 Blazer with a leaf spring rear set up. I would like to do a bag set up but I don't know what you need to do it. I really need some one I can pick there brain for more info. The air bags would be best because I have a very steep drive way but I haven't found any one to help me yet.
Posted via Mobile Device

PBFAB.COM · 01-24-2013, 01:37 PM

Here some of our Dropmember Mild front and Stage 2 rear with coil-overs.

shawno72 · 01-24-2013, 02:04 PM

^^Very nice^^

RINC · 01-24-2013, 08:31 PM

Quote:

Originally Posted by MDc10

I dont like it its a rough ride, but the streets here are terrible.Posted via Mobile Device

Hahaha ! All roads in Oklahoma are horrible

HouldenCaulfield · 01-24-2013, 08:42 PM

Yes, roads here are not good. But, I have yet to see them very good anywhere.
Posted via Mobile Device

ZUBZ · 01-25-2013, 02:46 AM

Seems like this roads issue is a problem everywhere, in Europe it is an issue and down here as well.

MDc10 · 01-25-2013, 09:11 AM

Quote:

Originally Posted by Blazer383

I have a 1971 Blazer with a leaf spring rear set up. I would like to do a bag set up but I don't know what you need to do it. I really need some one I can pick there brain for more info. The air bags would be best because I have a very steep drive way but I haven't found any one to help me yet.
Posted via Mobile Device

IF I knew alot I would be more than happy to help, hell im still learning when it comes to bags, but I will be more than happy to help with what I know. I'm in tha process now of tear down for the suspension rebuild. What I did was troll the suspension threads and ask them guys questions, if they didn't know the answer they pointed me in the right way to figure it out, they were very helpful. Also Travis from pro performance was awesome he answered out every question I threw at him. I dont remember his member name but look him up he can answer about anything.
Posted via Mobile Device

HouldenCaulfield · 01-25-2013, 10:07 AM

Travis = pro performance

That is his screen name.

Expat_dude · 01-25-2013, 10:54 AM

Travis has been a great help to me! Great service !
Posted via Mobile Device

PBFAB.COM · 01-25-2013, 11:33 AM

Travis is a good guy and very helpful! He will treat you right!

**cericd** · 01-25-2013, 11:49 AM

Quote:

Originally Posted by Porterbuilt Street Rods

Here some of our Dropmember Mild front and Stage 2 rear with coil-overs.

Would like to know more about this setup. It looks a little lower than a regular 4/6 drop. Does it help keep the lower control arms up off the ground some? I'm pretty sure I've seen the build thread for this truck but I can't remember the name of the thread.

PBFAB.COM · 01-25-2013, 12:08 PM

Quote:

Originally Posted by cericd

Would like to know more about this setup. It looks a little lower than a regular 4/6 drop. Does it help keep the lower control arms up off the ground some? I'm pretty sure I've seen the build thread for this truck but I can't remember the name of the thread.

More info here: http://67-72chevytrucks.com/vboard/s...d.php?t=562456

budget78gmc · 01-28-2013, 11:26 AM

Static drop.
2.5 spindles and 1.5 coils cut. home made flip in rear. Heavy duty spring package. 9 leafs in rear. ended up 6.5 in front and 8 in the rear.
Before and after pic

502ms · 01-29-2013, 01:30 AM

Quote:

Originally Posted by Blazer383

I have a 1971 Blazer with a leaf spring rear set up. I would like to do a bag set up but I don't know what you need to do it. I really need some one I can pick there brain for more info. The air bags would be best because I have a very steep drive way but I haven't found any one to help me yet.
Posted via Mobile Device

Love my bags.
Posted via Mobile Device

JonFrankMc · 01-31-2013, 10:02 PM

my '71 stepper. 2.5" drop spindles and 3" springs in the back. 275/60/r15 on all 4 corners. Perfect for what I was looking for.

Chvy2NV · 02-01-2013, 01:24 AM

What are the guys running the 5/7 5/8 static dropped trucks using in the rear? What notch and blocks?
Posted via Mobile Device

fatgump · 02-01-2013, 10:51 PM

I have cpp springs, cpp notch and a 1" block

01-10-2013, 03:48 PM	#277
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: How about some pics of Static Dropped C-10's 2-1/2" drop spindles and 1/2 a coil cut off of new 3/4 ton springs (stock for a big block) in front and 5" drop coils, shock relocators with new stock shocks and a adj track bar in back on 15" ralleys. Attached Images __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

01-10-2013, 04:16 PM	#278
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: How about some pics of Static Dropped C-10's Nice stepper!!! What size rubber? __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

01-11-2013, 12:04 PM	#279
shiner,tx Registered User Join Date: Jul 2010 Location: shiner,texas Posts: 31	Re: How about some pics of Static Dropped C-10's what lens did you use for the photo, i like the 3-d shot.

01-15-2013, 05:14 PM	#280
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: How about some pics of Static Dropped C-10's 4/5 drop with 2 cut coils on the front and flip kit on the rear, 15x9 rims and 275-50-15 TA's all around. Uploaded with ImageShack.us

01-21-2013, 11:34 PM	#281
franciscocl7 Registered User Join Date: Nov 2005 Location: Morelia, Michoacan, Mexico Posts: 115	Re: How about some pics of Static Dropped C-10's Here is mine... Attached Images

01-24-2013, 07:55 AM	#282
Blazer383 Registered User Join Date: Jan 2013 Location: Deltona, FL Posts: 23	Re: How about some pics of Static Dropped C-10's I looked through this whole thread and all the drops that are the same look different from truck to truck. I'm having a hard time figuring what drop to go with. Posted via Mobile Device

01-24-2013, 01:37 PM	#285
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: How about some pics of Static Dropped C-10's Here some of our Dropmember Mild front and Stage 2 rear with coil-overs. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-24-2013, 02:04 PM	#286
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: How about some pics of Static Dropped C-10's ^^Very nice^^ __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-24-2013, 08:42 PM	#288
HouldenCaulfield Registered User Join Date: Oct 2012 Location: Tulsa, OK Posts: 108	Re: How about some pics of Static Dropped C-10's Yes, roads here are not good. But, I have yet to see them very good anywhere. Posted via Mobile Device

01-25-2013, 02:46 AM	#289
ZUBZ Registered User Join Date: Nov 2011 Location: Johannesburg, South Africa Posts: 354	Re: How about some pics of Static Dropped C-10's Seems like this roads issue is a problem everywhere, in Europe it is an issue and down here as well. __________________ ------------------------------------------------------ ZUBZ - C10 "GUS" - JOHANNESBURG, South Africa My 1970 C10 Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=542560

01-25-2013, 10:07 AM	#291
HouldenCaulfield Registered User Join Date: Oct 2012 Location: Tulsa, OK Posts: 108	Re: How about some pics of Static Dropped C-10's Travis = pro performance That is his screen name.

01-25-2013, 10:54 AM	#292
Expat_dude Registered User Join Date: Jul 2012 Location: Brookhaven, Ms/ Sakhalin Russia Posts: 370	Re: How about some pics of Static Dropped C-10's Travis has been a great help to me! Great service ! Posted via Mobile Device __________________ 1970 Chevy swb, project UGHH! 1987 Grand National http://s168.photobucket.com/albums/u.../1970%20Chevy/

01-25-2013, 11:33 AM	#293
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: How about some pics of Static Dropped C-10's Travis is a good guy and very helpful! He will treat you right! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-28-2013, 11:26 AM	#296
budget78gmc Registered User Join Date: Jan 2011 Location: South Hutchinson, KS Posts: 215	Re: How about some pics of Static Dropped C-10's Static drop. 2.5 spindles and 1.5 coils cut. home made flip in rear. Heavy duty spring package. 9 leafs in rear. ended up 6.5 in front and 8 in the rear. Before and after pic Attached Images __________________ SOLD 1978 GMC Sierra Grande "Slow Budget Build" 1969 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=440536

01-31-2013, 10:02 PM	#298
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: How about some pics of Static Dropped C-10's my '71 stepper. 2.5" drop spindles and 3" springs in the back. 275/60/r15 on all 4 corners. Perfect for what I was looking for. Last edited by JonFrankMc; 01-31-2013 at 11:06 PM.



Register or Log In To remove these advertisements.

02-01-2013, 01:24 AM	#299
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: How about some pics of Static Dropped C-10's What are the guys running the 5/7 5/8 static dropped trucks using in the rear? What notch and blocks? Posted via Mobile Device

02-01-2013, 10:51 PM	#300
fatgump Registered User Join Date: Apr 2011 Location: Arizona Posts: 249	Re: How about some pics of Static Dropped C-10's I have cpp springs, cpp notch and a 1" block Attached Images

Register or Log In To remove these advertisements.