Cameo bed wheel opening same as a 58-59 fleetside? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tpimuncie · 03-01-2013, 10:27 PM

Does anybody know if the wheel well is the same on a cameo bed and 58-59 fleetside? Thanks in advance
Posted via Mobile Device

Rude Dude · 03-01-2013, 10:56 PM

cameo's are fiberglass, fleetside are metal beds

tpimuncie · 03-01-2013, 10:58 PM

Quote:

Originally Posted by Rude Dude

cameo's are fiberglass, fleetside are metal beds

Correct im asking about the "wheel well itself" is it identical as a fleetside bed (metal)
Posted via Mobile Device

**G&R's57GMC** · 03-02-2013, 04:12 AM

I would say no.

**G&R's57GMC** · 03-02-2013, 04:18 AM

Steel looks similar but not exact

tpimuncie · 03-02-2013, 04:20 AM

Hmm looks pretty damn close to me,
Posted via Mobile Device

dwcsr · 03-02-2013, 09:18 AM

They are not the same wheel housing. Not even shaped close enough to interchange. The Cameo is narrow and rounded the fleetside is wide and angular.

The second set are from a later model but look very similar. The complete bed is a cameo. Cameo be is narrower inside than a fleetside

broey · 03-02-2013, 11:35 AM

they are different shapes. but the cameo bed sides are thick. so it may still be the same depth and width

tpimuncie · 03-02-2013, 03:11 PM

Cameo wheel opening and panel is the same so does a 55-59 panel have same opening as a 58-59 fleetside?
Posted via Mobile Device

**G&R's57GMC** · 03-02-2013, 06:20 PM

Quote:

Originally Posted by dwcsr

They are not the same wheel housing. Not even shaped close enough to interchange. The Cameo is narrow and rounded the fleetside is wide and angular.

The second set are from a later model but look very similar. The complete bed is a cameo. Cameo be is narrower inside than a fleetside

The Cameo is a step side bed with fiberglass quarter panels hung on the step side bed. There is no wheel well intrusion in the bed area.

The photo in the above post shows a modified Cameo bed with 'tubs' in the bed that were added by the owner.

The red bed is a step side, the copper bed is a Cameo and the grey bed is a fleet side. They all have custom floor finishes. The stock boards would have been painted black same for the rub strips.

**G&R's57GMC** · 03-02-2013, 06:24 PM

TPIMuncie, What are you trying to do ?

tpimuncie · 03-02-2013, 06:30 PM

Reason i ask is because i found some fender skirts from a cameo and want some for my truck, seen couple trucks with some and am thinking they fit. I know for sure that they fit panel trucks
Posted via Mobile Device

_Ogre · 03-02-2013, 07:35 PM

if those ^^ skirts were made for a cameo, they definitely don't fit well on that stepside

tpimuncie · 03-02-2013, 07:36 PM

Not trying to put em on a stepside
Posted via Mobile Device

**G&R's57GMC** · 03-02-2013, 08:45 PM

I think Ogre meant Fleet side.

All ya can do is try 'um on your truck, if they fit great, if not modify or sell them.

Do you have any pictures of your truck ?

**buggy5872** · 03-03-2013, 08:37 PM

If they fit the panel truck then they will not fit the fleetside. The fleetside bed wheel opening is different than a panel or burb. I have no idea about cameo openings.

03-01-2013, 10:27 PM	#1
tpimuncie Registered User Join Date: Jan 2013 Location: Yuba city ca Posts: 979	Cameo bed wheel opening same as a 58-59 fleetside? Does anybody know if the wheel well is the same on a cameo bed and 58-59 fleetside? Thanks in advance Posted via Mobile Device

03-01-2013, 10:56 PM	#2
Rude Dude Registered User Join Date: Sep 2005 Location: Glendale Arizona Posts: 1,188	Re: Cameo bed wheel opening same as a 58-59 fleetside? cameo's are fiberglass, fleetside are metal beds __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=436442

03-02-2013, 04:12 AM	#4
G&R's57GMC Senior Member Join Date: Aug 2010 Location: Shasta Lake, CA. Posts: 1,619	Re: Cameo bed wheel opening same as a 58-59 fleetside? I would say no. Attached Images

03-02-2013, 04:18 AM	#5
G&R's57GMC Senior Member Join Date: Aug 2010 Location: Shasta Lake, CA. Posts: 1,619	Re: Cameo bed wheel opening same as a 58-59 fleetside? Steel looks similar but not exact Attached Images

03-02-2013, 04:20 AM	#6
tpimuncie Registered User Join Date: Jan 2013 Location: Yuba city ca Posts: 979	Re: Cameo bed wheel opening same as a 58-59 fleetside? Hmm looks pretty damn close to me, Posted via Mobile Device

03-02-2013, 09:18 AM	#7
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Cameo bed wheel opening same as a 58-59 fleetside? They are not the same wheel housing. Not even shaped close enough to interchange. The Cameo is narrow and rounded the fleetside is wide and angular. The second set are from a later model but look very similar. The complete bed is a cameo. Cameo be is narrower inside than a fleetside Attached Images

03-02-2013, 11:35 AM	#8
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: Cameo bed wheel opening same as a 58-59 fleetside? they are different shapes. but the cameo bed sides are thick. so it may still be the same depth and width __________________ Squarebody Syndicate

03-02-2013, 03:11 PM	#9
tpimuncie Registered User Join Date: Jan 2013 Location: Yuba city ca Posts: 979	Re: Cameo bed wheel opening same as a 58-59 fleetside? Cameo wheel opening and panel is the same so does a 55-59 panel have same opening as a 58-59 fleetside? Posted via Mobile Device

03-02-2013, 06:24 PM	#11
G&R's57GMC Senior Member Join Date: Aug 2010 Location: Shasta Lake, CA. Posts: 1,619	Re: Cameo bed wheel opening same as a 58-59 fleetside? TPIMuncie, What are you trying to do ?

03-02-2013, 06:30 PM	#12
tpimuncie Registered User Join Date: Jan 2013 Location: Yuba city ca Posts: 979	Re: Cameo bed wheel opening same as a 58-59 fleetside? Reason i ask is because i found some fender skirts from a cameo and want some for my truck, seen couple trucks with some and am thinking they fit. I know for sure that they fit panel trucks Posted via Mobile Device

03-02-2013, 07:35 PM	#13
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,677	Re: Cameo bed wheel opening same as a 58-59 fleetside? if those ^^ skirts were made for a cameo, they definitely don't fit well on that stepside __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

03-02-2013, 07:36 PM	#14
tpimuncie Registered User Join Date: Jan 2013 Location: Yuba city ca Posts: 979	Re: Cameo bed wheel opening same as a 58-59 fleetside? Not trying to put em on a stepside Posted via Mobile Device

03-02-2013, 08:45 PM	#15
G&R's57GMC Senior Member Join Date: Aug 2010 Location: Shasta Lake, CA. Posts: 1,619	Re: Cameo bed wheel opening same as a 58-59 fleetside? I think Ogre meant Fleet side. All ya can do is try 'um on your truck, if they fit great, if not modify or sell them. Do you have any pictures of your truck ?

03-03-2013, 08:37 PM	#16
buggy5872 Senior Member Join Date: Jun 2011 Location: North Beaver TWP PA Posts: 833	Re: Cameo bed wheel opening same as a 58-59 fleetside? If they fit the panel truck then they will not fit the fleetside. The fleetside bed wheel opening is different than a panel or burb. I have no idea about cameo openings. __________________ ___________________________ 1959 Apache Short Fleetside, 1959 Apache NAPCO Long Stepside, 1957 3100 with 59 fleetside bed 1957 5700 LCF Crew Cab "Big Bertha",1959 GMC F370 1958 GMC 600, 1946 Chevy, 1959 Viking 60 LCF 1974 Elcamino SS, 1979 6500 GMC Tilt Bed Wrecker Big Bertha Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.